IOデータ GV-MVP/RX,RX2は生産完了になり、後継としてGV-MVP/RX3が出ています。しかしGV-MVP/RX3はMPEG2エンコーダが変更になったため今のところ対応ドライバがありません。
@@ -84,14 +96,17 @@ 放映テレビ局とビットレートを選択する画面に移動するので内容を確認して予約ボタンを押します。番組の録画予約は番組ごとに一度するだけで全話自動で録画することが可能です。

-

　予約ボタンを押すとデータベースの録画予約テーブル[foltia_tvrecord]に番組IDと放送局、録画ビットレートが追加されます。その後、キュー入れプログラム[addatq.pl]を呼びます。addatq.plは番組IDと局IDを受け取り48時間以内の放映予定を探し、それぞれの放映ごとに録画準備のためのプログラム[folprep.pl]を放送予定時刻の5分前にキュー入れします。
　予約番組の放送予定時刻の5分前になると、準備プログラム[folprep.pl]が実行されます。これは、最新の番組表データを再取得し、放映時刻が変更されてないか確認後、放送開始時刻の1分前に録画プログラム[recwrap.pl]が走るようにキューを入れます。放送時刻が15分以上先に延びていたら、再度放送予定時刻の5分前に準備プログラム[folprep.pl]をキュー入れします。
- 　放送予定時刻の1分前になると録画の一連の流れを管理する録画プログラム[recwrap.pl]が起動します。このプログラムは、録画チャンネルが外部入力であれば外部チューナのチャンネルを適切なものに切り替えるためにリモコン送信プログラム[transfer.pl]を呼びだし、次に実際にビデオでバイスからファイルへの記録を行うキャプチャプログラム[tvrecording.pl]を呼び出します。
- 　キャプチャプログラム[tvrecording.pl]はivtvドライバに付属のrecord-v4l2.plをベースに拡張したもので、搭載されている録画デバイスの空き状況を調べて、空いてる適切なデバイスを利用します。foltiaは特に指定をしない場合、同時録画する場合、地上波録画をキャプチャデバイスの若い番号から順番に、外部入力を一番大きいデバイスから順番に使用していきます。例としてキャプチャカードが4枚入っている場合、地上波録画は/dev/video0から、外部入力録画は/dev/video3から使われていきます。空きデバイスがない場合は、一番若い番号を持つビデオデバイスをつかんでるプロセスを止め、そのデバイスを利用します。録画は前後に10秒程度の余分な録画を行おうとするため、同一のチャネルで連続している番組を指定した場合であっても可能であれば2チューナ使用する形となります。tvrecording.plの録画チャンネルの引数に0を指定した場合はS入力が、-1を指定した場合はコンポジット入力が録画されます。外部入力はデフォルトで一番番号の大きいデバイスを利用します。録画が終了するとデータベースの放送情報テーブル[foltia_subtitle]に録画したMPEG2ファイル名を記録して親プロセスに戻ります
- 　録画プログラムが終了すると、親プロセスのrecwrap.plはMPEG4への変換(トラコン)の必要があるか確認して、必要な場合変換スクリプト[vfr4psp.sh]か[ipodtranscode.pl]が呼び出されます。変換フォーマットや品質は設定ファイルであらかじめ設定しておきます。MPEG4ファイルは、MPEG2ファイル保存ディレクトリの下に番組ごとに整理されます。具体的には[TID].localized/mp4/の形を取ります。番組個別ディレクトリはMac +　放送予定時刻の1分前になると録画の一連の流れを管理する録画プログラム[recwrap.pl]が起動します。このプログラムは、録画チャンネルが外部入力であれば外部チューナのチャンネルを適切なものに切り替えるためにリモコン送信プログラム[transfer.pl]を呼びだし、次に実際にビデオでバイスからファイルへの記録を行う録画プログラム[digitaltvrecording.pl]か[tvrecording.pl]を呼び出します。デジタル録画出来るデバイスが不足した場合は利用可能なアナログ録画デバイスがあればそちらで録画を実行するように努力します。
+　[digitaltvrecording.pl]は実際の録画プログラムを呼び出します。BS1/BS2はwineを利用してTsSplitter.exeを起動して適切な分割処理をします。
+ 　アナログ録画の場合はキャプチャプログラム[tvrecording.pl]はivtvドライバに付属のrecord-v4l2.plをベースに拡張したもので、搭載されている録画デバイスの空き状況を調べて、空いてる適切なデバイスを利用します。foltiaは特に指定をしない場合、同時録画する場合、地上波録画をキャプチャデバイスの若い番号から順番に、外部入力を一番大きいデバイスから順番に使用していきます。例としてキャプチャカードが4枚入っている場合、地上波録画は/dev/video0から、外部入力録画は/dev/video3から使われていきます。空きデバイスがない場合は、一番若い番号を持つビデオデバイスをつかんでるプロセスを止め、そのデバイスを利用します。録画は前後に10秒程度の余分な録画を行おうとするため、同一のチャネルで連続している番組を指定した場合であっても可能であれば2チューナ使用する形となります。tvrecording.plの録画チャンネルの引数に0を指定した場合はS入力が、-1を指定した場合はコンポジット入力が録画されます。外部入力はデフォルトで一番番号の大きいデバイスを利用します。
+ 　 + 録画が終了するとデータベースの放送情報テーブル[foltia_subtitle]に録画したMPEG2ファイル名を記録して親プロセスに戻ります
+ 　録画プログラムが終了すると、Starlight Breaker用キャプチャ画像をmplayerを利用して作成し、親プロセスの[recwrap.pl]はMPEG4への変換(トラコン)の必要があるか確認して、必要な場合変換スクリプト[ipodtranscode.pl]が呼び出して自分は終了します。変換フォーマットや品質は設定ファイルであらかじめ設定しておきます。MPEG4ファイルは、MPEG2ファイル保存ディレクトリの下に番組ごとに整理されます。具体的には[TID].localized/mp4/の形を取ります。番組個別ディレクトリはMac OS Xのローカライズ機構に準拠しているため、例えば665.localizedディレクトリはMac OS XのFinderでマウントすると「魔法少女リリカルなのはA's」と表示されます。
- 　MPEG4への変換が終わるとpsp用MPEG4オプティマイザ[mp4psp]でタイトル入れとヘッダ組み立てをして最適化したあと、mplayerとImageMagickを利用してサムネールを作成します。サムネールはPSPの仕様に準拠して120x160で拡張子が.THMのjpegファイルです。そしてデータベースの放送情報テーブル[foltia_subtitle]に変換ファイル名を書き込んで録画の一連の流れが終了します。
- 図に示すとこうなります。
+ 　[ipodtranscode.pl]は起動されると録画が古い順に順番にトラコンを実行し、サムネールを作成して、すべての録画ファイルを変換すると終了します。サムネールはPSPの仕様に準拠して120x160で拡張子が.THMのjpegファイルです。そしてデータベースの放送情報テーブル[foltia_subtitle]に変換ファイル名を書き込んで録画の一連の流れが終了します。
+ 図に示すとこうなります。(ごめん、ちょっと古いまま)

@@ -113,34 +128,31 @@

・インストール

　foltiaの動作にはLinux,Apache,PHP,Perl,PostgreSQLとビデオキャプチャ用ivtvドライバなどが必要です。
+

　foltiaの動作にはLinux,Apache,PHP,Perl,PostgreSQLと録画プログラム、mplayer,ffmpeg,faac,iui,などが必要です。
　インストールはおおまかにOS,Apache,ivtvドライバ、PostgreSQL、foltiaの順で進めて行くとよいでしょう。
　phpPgAdminやSambaなども必要に応じて入れておくと便利かもしれません。
-　foltiaのダウンロードは公式ページまたはSubversionで入手することが可能です。
+ 　foltiaのダウンロードは公式ページのtarボールまたはSubversionで入手することが可能です。
　Subversionを使う場合は下記のコマンドで最新versionを入手できます。

$svn co http://svn.dcc-jpl.com/foltia/trunk foltia

またインストールについては「foltiaインストールマニュアル」も参考になります。

またインストールについては「foltiaインストールマニュアル」も参考になります。(内容はやや古くなっています)

・配線

　あらかじめキャプチャカードを取り付け、に外部チューナを外部入力端子につないでおきます。

　あらかじめキャプチャカード、録画装置を取り付け、アンテナ線をつなぎ、外部チューナを外部入力端子につないでおきます。

・OSインストール

　手もとの開発環境ではFedora Coreを使っています。一通りインストールを終えたらfoltiaを動作させるアカウント「foltia」を作ります。

　筆者の環境ではFedora Coreを使っています。一通りインストールを終えたらfoltiaを動作させるアカウント「foltia」を作ります。

・Apacheインストール

Apacheは2.2以降が2GBを越えるファイルの転送にも対応していて便利です。
ポイントは、Apacheを動かすユーザをfoltiaにすることと、「.THM」のmime typeをimage/jpegにする設定を追加することです。

・ivtvドライバインストール

「FEDORA - CORE で GV-MVP/RX を使う」のrpmパッケージを使用すると早いです。
- 複数エンコーダを搭載している場合には/etc/modprobe.confに
- options ivtv tuner=46,46
- と、エンコーダの数だけ「46」を書き足します。
- ビデオキャプチャデバイスが利用できるようになったら
- chmod 0666 /dev/video*
- でroot以外でも利用できるようにパーミッションを変更します。

最近のLinuxのディストリビューションだと標準で使えるようになっていることが多いようです。

・PostgreSQLインストール

ポイントは文字コードをEUC-JPでデータベースをつくることです。foltiaという名前でデータベースを作ったら、foltiaパッケージ付属のmktable.txtでテーブルを作成します。

・各種ツールインストール

・各種アプリインストール

以下のアプリケーションを利用します。インストールされてなければyumやaptなどからインストールして下さい。
- mplayer:サムネール作成に利用
-ImageMagick:サムネール作成に利用

+ mplayer:サムネール作成、トラコンに利用
+ImageMagick:サムネール作成に利用 +
+wine:TS分割ツールTsSplitter起動に利用 +
+MP4Box:各トラックをまとめてMP4ピルドに利用

・各種Perlモジュールのインストール

以下のPerlモジュールを利用します。インストールされてなければCPANなどからインストールして下さい。
@@ -153,23 +165,31 @@

EPG番組表取得に必要なXMLTV日本語版をインストールします。ぱ研が制作したものがすでに本家にマージされているようです。

・ffmpegインストール

iPod H.264/AVCを作れる拡張をされたffmpegをインストールします。
+

最近のffmpegはiPod用H.264作成オプション(-f ipod)をもっていますが、ディストリビューション付属のffmpegがうまく動かなかったら作り直してインストールします。

1.ffmpegのソースを入手する -

$svn checkout --revision {"2006-03-28 22:00"} svn://svn.mplayerhq.hu/ffmpeg/trunk +

$svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg -

2.ここにあるiPodパッチをあてる
- http://lists.mplayerhq.hu/pipermail/ffmpeg-devel/2006-March/009814.html

- 環境によっては更にx264.cのアップデートが必要という情報が寄せられた。(From foltia BBS TTTさん) -

svn cat --revision 6711 ffmpeg/libavcodec/x264.c > ffmpeg/libavcodec/x264.c

- 3.メイクする
+

2.メイクする
手もとでは下記オプションでビルドしています。 -

$./configure --enable-mp3lame --enable-x264 --enable-gpl --enable-a52 ---enable-xvid --enable-faac --enable-faad --enable-amr_nb --enable-amr_wb --enable-pthreads +

$./configure --enable-libmp3lame --enable-libx264 --enable-libxvid + --enable-libfaac --enable-libfaad --enable-pthreads --enable-gpl

・foltia本体

installディリクトリの中にある「perl」と「php」をそれぞれ適当なところに配置します。
手もとの環境では/home/foltia/perl/と/home/foltia/php/に配置しています。

・mp4psp

MPEG4のトラコンに利用しているツール「mp4psp」をインストールします。「ヘチマコンピュータ」によって作られたコードの「作業日誌と云う名の不定記 - 2005/01/23 」によるLinux版をベースにしたツールです。PSP用にタイトルを入力してATOMヘッダを組み立てて最適化するのに使用します。またファーストスタート形式にも最適化します。

・各種ツールインストール

以下のプログラムを利用します。
+recfriio:Friioを使ったデジタルハイビジョン録画に利用 http://2sen.dip.jp/cgi-bin/friioup/source/up0777.zip +
+TsSplitter:MPEG-2 +TS streamを分割するwindows用プログラム http://2sen.dip.jp/cgi-bin/friioup/source/up0827.zip
+tss.py:TSを分割するPythonスクリプト、正確にはHD以外のストリームを捨てるスクリプト
+Nero AAC コーデック:オーディオトラックのAACエンコードに使う。FAACと比べて品質がとても良い。
+上記のneroAacEnc, +recfriio, +TsSplitter.exe,tss.pyは~/perl/tool/あたりに入れて下さい。
+
+ iui:iPhone用UIライブラリ
+ iuiは~/php/iui/として入れて下さい。

・外部チューナコントロール(オプション)

Home Electronics社製USB 赤外線トランスミッタ　Tira-2.1を利用することにより、外部チューナのコントロールを行うことが可能です。
@@ -186,5 +206,5 @@
$recunits = '4';
- 搭載エンコーダの数。GV-MVP/RX2Wを一枚刺しの場合は2になります。
+ アナログ録画の設定です。搭載エンコーダの数を指定します。GV-MVP/RX2Wを一枚刺しの場合は2になります。デジタルハイビジョン録画のみの場合は0になります。

$recfolderpath = '/home/foltia/php/tv';
@@ -192,17 +212,14 @@
$uhfbandtype = 0;
- UHF帯なら0、CATVなら1を指定します。それぞれivtvのntsc-bcast-jpとntsc-cable-jpに対応します。
+ アナログ録画の設定です。UHF帯なら0、CATVなら1を指定します。それぞれivtvのntsc-bcast-jpとntsc-cable-jpに対応します。

$rapidfiledelete = 1;
1なら削除ファイルは「mita」ディレクトリに移動、0なら即時削除します。mitaディレクトリはゴミ箱のように機能しますが自動的に削除はしません。らくちんな運用をしたければ0、安全のため保存しておきたければ1でよいでしょう。

$tunerinputnum = 6;
- $svideoinputnum = 7;
- $comvideoinputnum = 8;
+

$tunerinputnum = 0;
+ $svideoinputnum = 1;
+ $comvideoinputnum = 2;
上記3行にキャプチャカードごとに固有な映像入力のパラメータを示すivtvのinput numperを指示します。それぞれ、チューナ入力、S映像入力、コンポジット入力を指定します。デフォルトはIO - DATA製 GV-MVP/RX,RX2,RX2Wカードで利用できる設定となっています。
-カード固有の値を調べるにはivtvドライバをインストールした状態で

$/usr/bin/ivtvctl.paken - --list-inputs --device=/dev/video0

などで可能です。
+ DATA製 GV-MVP/RX,RX2,RX2Wカードで利用できる設定となっています。 +

$haveirdaunit = 1;
@@ -216,12 +233,14 @@ $trconqty = 2;
MPEG4変換の品質を指定します。デフォルトはH.264/AVCの中画質となっています。
- 3の高画質はファイルサイズは小さく画質もよいのですが処理時間がかかりすぎているのでデフォルトには指定していません。
- 手もとのCeleron2.6GHzのパソコンで、3の設定で実尺の3.4倍、2の設定で1.1倍、1の設定で0.77倍位の処理時間で完了しています。
- 0:PSP/iPod XviD MPEG4(旧式):faacとMPEG4IPを使って変換
- 1:iPod Xvid MPEG4 標準画質 15fps 300kbps
- 2:iPod H.264 中画質 24fps 300kbps
- 3:iPod H.264 高画質 30fps 300kbps
- 4:iPhone/iPod 480x320 H.264 高画質 24fps 350kbps
- 5:iPhone/iPod 480x320 H.264 高画質 30fps 350kbps
+デフォルトでバランスのよい2が選択されています。
+アナログソースとデジタルソースで設定が若干異なります。
+アナログソースでは +手もとのCeleron2.6GHzのパソコンで、3の設定で実尺の3.4倍、2の設定で1.1倍、1の設定で0.77倍位の処理時間で完了しています。
+0:PSP/iPod XviD MPEG4(旧式):faacとMPEG4IPを使って変換(古い設定)
+ 1:iPod Xvid MPEG4 標準画質 15fps 300kbps / デジタル 360x202 24.00fps 300kbps
+ 2:iPod H.264 中画質 24fps 300kbps / デジタル 360x202 24.00fps 300kbps
+ 3:iPod H.264 高画質 30fps 300kbps/ デジタル 480x272 29.97fps 400kbps
+ 4:iPhone/iPod 480x320 H.264 高画質 24fps 350kbps / デジタル 640x352 29.97fps 600kbps +

$phptoolpath = $toolpath ;
@@ -250,5 +269,5 @@

・設定3:foltia_stationテーブル

録画の重要な設定となる項目です。インストールが無事に終了してれば首都圏の放送局設定サンプルが入っていますのでそれを参考に設定して下さい。
- foltia_stationテーブルのそれぞれの項目について説明します。
+ foltia_stationテーブルのそれぞれの項目について説明します。しょぼいカレンダーの情報によって放送局は自動的に追加されていきます。

stationid:ユニークなID値です。
@@ -266,5 +285,7 @@ foltia_epgにデータがインポートされていて
3.foltia_stationテーブルのontvcodeフィールドにfoltia_epgテーブルのontvchannelフィールドと同じ放送局識別名が記入されている
- 局になります。デフォルトで関東キー局とBS、BSデジタル局、CS局が設定されています。

+ 局になります。デフォルトで関東キー局とBS、BSデジタル局、CS局が設定されています。
+ digitalch:地デジの物理チャンネルを入れます。BSデジタルは日本全国共通なので変更の必要はありません。
+digitalstationband:地デジなら0、BSデジタルなら1、CSデジタルなら2を入れます。(現在未使用)

・Tira2準備(オプション)

　USBトランスミッタであるTira2を動作させるために必要な準備を行います。
@@ -276,4 +297,10 @@

・動作確認

　ここまで設定できたらあと一息で完了します。まず単純な録画ができるか動作確認していきましょう。
+ 【デジタルハイビジョン編】
+~/perl/toolにインストールしたrecfriioが正しく動作するか確かめます。

recfriio --b25 27 60 /home/foltia/php/tv/test-mpeg2-ts.m2t

これで27チャンネルのvlcで視聴出来る状態のMPEG2-tsファイルが60秒ぶん、指定した位置にでき上がれば録画成功です。
+ エラーがでた場合はインストールを見直して下さい。
+ 【アナログ編】
　最初に

$head /dev/video0

@@ -281,5 +308,6 @@ 　つぎに、録画試験を~/perl/tvrecording.plを使って行います。

$./tvrecording.pl 1 60 0 test.m2p 5 0 0 /dev/video0

としてみましょう。この例は1chを60秒5Mbpsでtest.m2pというファイル名で/dev/video0から録画することを意味しています。2分程度でプロンプトに戻ります。録画ファイル保存フォルダ(デフォルトだと/home/foltia/tv/)にtest.m2pが出来ていて、ファイルを再生して期待通りならば第1段階成功です。うまくいかなかった場合には~/debug.txtに書かれる情報も参考にして原因を突き止めて下さい。
+

　つぎに、しょぼいカレンダーから番組データをインポートできるかを確認します。

$./perl/getxml2db.pl

@@ -287,22 +315,22 @@ 　ここまでできたらWebブラウザでインストールしたphpのディレクトリを開いてみましょう。

- 　番組表が表示されているのが確認できます。実際に予約をして見ましょう。一番左のTIDの数字をクリックするとそのタイトルの予約画面になります。例では690のCanvas2 - 〜虹色のスケッチ〜をクリックした画面です。
-

- 　放送局とビットレートを選択して予約を押すと予約キューが入ります。放送局の設定で[全局]を選択すると文字通り放送スケジュールが入ってる局を全局録画しようとします。いまのところ受信可能不可能に関係なく録画します。想定してる用途は『千葉テレビとテレビ埼玉とtvkでリリカルなのはA'sを録画しておこう!』というものではなくしょぼいカレンダーが持つ*声優関連*や*アニメ特番*などの放送局が特定できない番組グループを録画するためのものです。
+ 　番組表が表示されているのが確認できます。実際に予約をして見ましょう。一番左のTIDの数字をクリックするとそのタイトルの予約画面になります。例は画面外の1546版のマリア様がみてる 4thシーズンをクリックした画面です。
+

+ 　放送局を選択して予約を押すと予約キューが入ります。デジタル録画優先オプションとアナログビットレートは必要に応じて変更して下さい。放送局の設定で[全局]を選択すると文字通り放送スケジュールが入ってる局を全局録画しようとします。想定してる用途は『千葉テレビとテレビ埼玉とtvkでリリカルなのはA'sを録画しておこう!』というものではなくしょぼいカレンダーが持つ*声優関連*や*アニメ特番*などの放送局が特定できない番組グループを録画するためのものです。
　予約が完了したらシェルでatqコマンドでキューが入ったを確認します。

$atq
-182194 2006-01-31 00:40 a foltia

+182194 2009-01-08 01:10 a foltia

放映予定の5分前に起動するプロセスが入ってることが確認できます。
- この例だと00:40にfolprep.plが起動します。
+ この例だと01:10にfolprep.plが起動します。
folprep.plが起動すると放映予定1分前にrecwrap.plがキューに入ります。

$atq
- 182195 2006-01-31 00:44 a foltia

　番組が終了したらMPEG2が録画されたか確認してみましょう。デフォルトで~/php/tv/690-16-20060131-0045.m2pというファイルが出来ているはずです。ファイル名はそれぞれ以下のルールで命名されます。
+ 182195 2009-01-08 01:14 a foltia

　番組が終了したらMPEG2が録画されたか確認してみましょう。デフォルトで~/php/tv/1546-1-20090108-0115.m2tというファイルが出来ているはずです。ファイル名はそれぞれ以下のルールで命名されます。
TID:しょぼいカレンダーと共通の番組IDです。
話数:番組が第何話かを示します。該当しない場合は空白になります。
放映日:YYYYmmddスタイルの放映日です。
放映時刻:0000-2359の間での開始時刻になります。しょぼいカレンダーでは24:00以降の時刻を扱いますがfoltiaでは暦通り24:00以降の時刻は次の日として取り扱います。
- 　MPEG2の録画が完了するとfoltiaはffmpegを利用してH.264/AVCへの変換を開始します。所要時間はCeleron2.6GHz環境で実尺の1.2倍程度の時間です。この例の場合~/php/tv/690.localized/mp4/MAQ-690-16-20060131-0045.MP4という動画ファイルと同じ階層にMAQ-690-16-20060131-0045.THMファイルができ上がります。ファイル名は、先頭がM4Vの場合MPEG4(XviD)、MAQの場合H.264/AVC、そのあとに続くのはMPEG2と同じルールです。

+ 拡張子:デジタルハイビジョンの場合.m2t、アナログ録画の場合m2pになります。
+ 　MPEG2の録画が完了するとfoltiaはffmpegを利用してH.264/AVCへの変換を開始します。この例の場合~/php/tv/1546.localized/mp4/MAQ-1546-1-20090108-0115.MP4という動画ファイルと同じ階層にMAQ-690-16-20060131-0045.THMファイルができ上がります。ファイル名は、先頭がM4Vの場合MPEG4(XviD)、MAQの場合H.264/AVC、そのあとに続くのはMPEG2と同じルールです。

　番組指定による自動録画が動いたら、つぎにEPGによる個別番組録画の動作確認に移りましょう。
　まず番組データをXMLTVを用いてインポートします。

@@ -349,5 +377,5 @@

予約一覧:

　大きく上下のふたつのエリアに分かれていて、予約されている番組の放映予定と番組名を一覧表示します。ここでも[TID]をクリックすると番組予約画面へ、[タイトル]をクリックすると「しょぼいカレンダー」の該当番組詳細画面へそれぞれ移動します。録画予約の解除は下半分のタイトルリストの項目から行います。EPG予約の解除もここから行います。「画質」項目は録画ビットレートをMbps単位で表示しています。(いまのところデジタル録画の重複表示には対応していません)
　色が付いている番組は重複警告です。搭載された録画ユニットで録画し切れない場合に色がつきます。赤色はカードに搭載されたアナログチューナーの重複、青色は外部入力の重複を示します。重複警告がでている番組は録画が欠ける可能性があります。また、アナログチューナー、外部チューナーともに00:00-00:30 番組A ,00:30-01:00 番組Bという番組が連続している場合は重複とは判断しません。
　引数rでエンコーダ数を変更して予約状況を調べる事が出来ます。listreserve.php?r=6で6台エンコーダを搭載したときの予約状況を調べる事が出来ます。
@@ -401,5 +429,8 @@
　「キャプ」でキャプチャ画面一覧を開きます。
-
+
+
+ この一連の画面をiPhoneで開くとこのようになります。
+

Folcast(RSS):

@@ -468,12 +499,12 @@

今後ユーザごとにFolcastを編集出来る機能などを開発予定です。

・おわりに

　以上、駆け足でfoltiaの概要を説明してきました。今のところfoltiaには視聴に関する機能は一切ありませんが、使用例として自宅では富士通T90Hというパソコンにfoltia録画ボリュームをSambaでマウントし、WinDVDでMPEG2を再生、外ではiPod - VideoでMPEG4を視聴しています。DVD Playerソフトでファイルを選んで再生するのがいまひとつめんどくさい操作なので、今後の改良点としたいところです。
+

　以上、駆け足でfoltiaの概要を説明してきました。今のところfoltiaには視聴に関する機能は一切ありませんが、パソコンにfoltia録画ボリュームをSambaでマウントし、VLCでMPEG2を再生、外ではiPhoneでfolcastかストリーミングで視聴しています。DVD + Playerソフトでファイルを選んで再生するのがいまひとつめんどくさい操作なので、今後の改良点としたいところです。
　foltiaはまだまだ開発途上のソフトウェアです。今後の計画は以下の様なものを考えています。
　・未読番組管理機能
　・ロケーションフリーテレビのようなライブストリーミング機能
- 　・デジタル放送のデジタル録画機能
- 詳しくはfoltia Development Central wiki:「foltia のToDoやらゆめを適当に書くwiki」に。
- 今後も全ての情報はDCC-JPL Japanの公式ページ<http://www.dcc-jpl.com/soft/foltia/>に掲載していきます。

+ 詳しくはfoltia Development Central wiki:「foltia + のToDoやらゆめを適当に書くwiki」に書かれる予定です。
+今後も全ての情報はDCC-JPL Japanの公式ページ<http://www.dcc-jpl.com/soft/foltia/>に掲載していきます。

・謝辞
以下の数々のサイトを利用、参考にさせていただいております。改めましてお礼申し上げます。
Index: trunk/install/perl/foltialib.pl =================================================================== --- trunk/install/perl/foltialib.pl (リビジョン 70) +++ trunk/install/perl/foltialib.pl (リビジョン 83) @@ -22,4 +22,25 @@ $DBPass=""; + + + $FILESTATUSRESERVINGLONG = 10; + $FILESTATUSRESERVINGSHORT = 20; + $FILESTATUSRECORDING = 30; + $FILESTATUSRECTSSPLITTING = 40; + $FILESTATUSRECEND = 50; + $FILESTATUSWAITINGCAPTURE = 55; + $FILESTATUSCAPTURE = 60; + $FILESTATUSCAPEND = 70; + $FILESTATUSTHMCREATE = 72; + $FILESTATUSWAITINGTRANSCODE = 80; + $FILESTATUSTRANSCODETSSPLITTING = 90; + $FILESTATUSTRANSCODEFFMPEG = 100; + $FILESTATUSTRANSCODEWAVE = 110; + $FILESTATUSTRANSCODEAAC = 120; + $FILESTATUSTRANSCODEMP4BOX = 130; + $FILESTATUSTRANSCODEATOM = 140; + $FILESTATUSTRANSCODECOMPLETE = 150; + $FILESTATUSALLCOMPLETE = 200; + #------------------------------ @@ -258,4 +279,164 @@ +sub getpidbympegfilename { +#引き数:m2pfilename +#戻り値:PID +my $m2pfilename = $_[0] ; +if ($m2pfilename eq ""){ + return 0 ; +} + +my $DBQuery = "SELECT pid FROM foltia_subtitle WHERE m2pfilename = '$m2pfilename' LIMIT 1 "; +my $sth; +$sth = $dbh->prepare($DBQuery); +$sth->execute(); +#print "$DBQuery\n"; +my @pidinfo = $sth->fetchrow_array; +my $pid = $pidinfo[0]; + +if ($pid eq ""){ + return 0 ; +}else{ + return $pid; +} +}#end sub getpidbympegfilename + +sub changefilestatus { +#引き数:PID,updatestatus +#戻り値:エラーコード +my $pid = $_[0] ; +my $updatestatus = $_[1]; +if (($pid eq "" ) || ($updatestatus eq "")){ + return 0 ; +} + +if ($updatestatus > 0 ){ +my $DBQuery = "UPDATE foltia_subtitle SET filestatus = $updatestatus , lastupdate = now() WHERE pid = $pid "; +my $sth; +$sth = $dbh->prepare($DBQuery); +$sth->execute(); +return 1; +}else{ + &writelog("foltialib changefilestatus ERR Sttus invalid:$updatestatus"); + return 0 ; +} +}# end sub changefilestatus + + +sub getfilestatus { +#引き数:PID +#戻り値:ステータス + +#10:予約中(5分以上先) +#20:予約中(5分以内) +#30:録画中 +#40:TSSplit中 +#50:MPEG2録画終了 +#55 静止画キャプチャ待 +#60:静止画キャプ中 +#70:静止画キャプ終了 +#72:サムネイル作成済み(.THM) +#80:トラコン待 +#90:トラコン中:TSsplit +#100:トラコン中:H264 +#110:トラコン中:WAVE +#120:トラコン中:AAC +#130:トラコン中:MP4Box +#140:トラコン中:ATOM +#150:トラコン完了 +#200:全完了 +my $pid = $_[0] ; +if ($pid eq "" ){ + return 0 ; +} + +my $DBQuery = "SELECT filestatus FROM foltia_subtitle WHERE pid = $pid "; +my $sth; +$sth = $dbh->prepare($DBQuery); +$sth->execute(); + +my @statusinfo = $sth->fetchrow_array; +my $status = $statusinfo[0]; + +if ($status eq ""){ + return 0 ; +}else{ + return $status; +} + + +}# end sub getfilestatus + + +sub makemp4dir{ +#TIDが100以上の3桁の場合はそのまま +my $pspfilnamehd = $_[0]; +my $tid = $_[0]; +my $pspdirname = "$tid.localized/"; +$pspdirname = $recfolderpath."/".$pspdirname; + +#なければ作る +unless (-e $pspdirname ){ + system("$toolpath/perl/mklocalizeddir.pl $tid"); + #&writelog("recwrap mkdir $pspdirname"); +} +$pspdirname = "$tid.localized/mp4/"; +$pspdirname = $recfolderpath."/".$pspdirname; +#なければ作る +unless (-e $pspdirname ){ + mkdir $pspdirname ,0777; + #&writelog("recwrap mkdir $pspdirname"); +} +return ("$pspdirname"); +}#endsub makemp4dir + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 1; Index: trunk/install/perl/updatem2pfiletable.pl =================================================================== --- trunk/install/perl/updatem2pfiletable.pl (リビジョン 69) +++ trunk/install/perl/updatem2pfiletable.pl (リビジョン 83) @@ -34,5 +34,5 @@ $sth->execute(); -while ($file = glob("$recfolderpath/*.m2p")) { +while ($file = glob("$recfolderpath/*.m2?")) { $file =~ s/$recfolderpath\///; $query = "insert into foltia_m2pfiles values ('$file')"; @@ -57,11 +57,11 @@ $filetid = $fileline[0]; $filetid =~ s/[^0-9]//g; - -$query = "insert into foltia_mp4files values ('$filetid','$fileline[2]')"; -$oserr = $dbh->do($query); +if (($filetid ne "" )&& ($fileline[2] ne "" )){ + $query = "insert into foltia_mp4files values ('$filetid','$fileline[2]')"; + $oserr = $dbh->do($query); #print "$filetid;$fileline[2];$query\n" # http://www.atmarkit.co.jp/fnetwork/rensai/sql03/sql1.html - -} +}#end if +}# end foreach $oserr = $dbh->commit; Index: trunk/install/perl/foltia_conf1.pl.template =================================================================== --- trunk/install/perl/foltia_conf1.pl.template (リビジョン 70) +++ trunk/install/perl/foltia_conf1.pl.template (リビジョン 83) @@ -15,14 +15,14 @@ $uhfbandtype = 1; # CATVなら1 UHF帯なら0 : 0=ntsc-bcast-jp 1=ntsc-cable-jp $rapidfiledelete = 1;#1なら削除ファイルは「mita」ディレクトリに移動。0なら即時削除 -$tunerinputnum = 6; #IO-DATA DV-MVP/RX,RX2,RX2W -$svideoinputnum = 7;#IO-DATA DV-MVP/RX,RX2,RX2W -$comvideoinputnum = 8;#IO-DATA DV-MVP/RX,RX2,RX2W +$tunerinputnum = 0; #IO-DATA DV-MVP/RX,RX2,RX2W +$svideoinputnum = 1;#IO-DATA DV-MVP/RX,RX2,RX2W +$comvideoinputnum= 2;#IO-DATA DV-MVP/RX,RX2,RX2W $haveirdaunit = 1;#Tira-2をつないでいるときに1,なければ0 $mp4filenamestyle = 1 ;#0:PSP ファームウェアver.2.80より前と互換性を持つファイル名 1;よりわかりやすいファイル名 $trconqty = 2; -#0:PSP/iPod XviD MPEG4(旧式):faacとMPEG4IPを使って変換 -#1:iPod Xvid MPEG4 標準画質 15fps 300kbps -#2:iPod H.264 中画質 24fps 300kbps -#3:iPod H.264 高画質 30fps 300kbps +#0:PSP/iPod XviD MPEG4(旧式):faacとMPEG4IPを使って変換(古い設定) +#1:iPod Xvid MPEG4 標準画質 15fps 300kbps / デジタル 360x202 24.00fps 300kbps +#2:iPod H.264 中画質 24fps 300kbps / デジタル 480x272 29.97fps 400kbps +#3:iPod H.264 高画質 30fps 300kbps / デジタル 640x352 29.97fps 600kbps $phptoolpath = $toolpath ;#php版の初期設定の位置。デフォルトではperlと同じ位置 Index: trunk/install/perl/digitaltvrecording.pl =================================================================== --- trunk/install/perl/digitaltvrecording.pl (リビジョン 83) +++ trunk/install/perl/digitaltvrecording.pl (リビジョン 83) @@ -0,0 +1,436 @@ +#!/usr/bin/perl +# +# Anime recording system foltia +# http://www.dcc-jpl.com/soft/foltia/ +# +#digitaltvrecording.pl +# friioをはじめとするデジタル録画プログラムを呼びだす録画モジュール。 +# +#usage digitaltvrecording.pl bandtype ch length(sec) [stationid] [sleeptype] [filename] [TID] [NO] [unittype] +#引数 +#bandtype : 0:地デジ 1:BSデジタル 2:CSデジタル +#ch :録画チャンネル (地デジはそのまま渡す、BS/CSデジタルは基本的にチャンネル BS1/BS2など同じ数時に) +#length(sec) :録画秒数 [必須項目] +#[stationid] :foltia stationid +#[sleeptype] :0かN Nならスリープなしで録画 +#[filename] :出力ファイル名 +#[TID] :しょぼかるタイトルID +#[NO] :その番組の放送話数 +#[unittype] :friioかfriioBSかユニデンチューナかHDUSかなど(未使用) +# +# DCC-JPL Japan/foltia project +# +# + +$path = $0; +$path =~ s/digitaltvrecording.pl$//i; +if ($pwd ne "./"){ +push( @INC, "$path"); +} + +#tvConfig.pl ------------------------------- +$extendrecendsec = 10; #recording end second. +#$startupsleeptime = 52; #process wait(MAX60sec) +$startupsleeptime = 27; #process wait(MAX60sec) +#------------------------------- + +require 'foltialib.pl'; + + &writelog("digitaltvrecording: DEBUG $ARGV[0] $ARGV[1] $ARGV[2] $ARGV[3] $ARGV[4] $ARGV[5] $ARGV[6] $ARGV[7] $ARGV[8]"); + + +#準備 +&prepare; +#もし録画が走ってたら、止める +#$reclengthsec = &chkrecprocess(); +#&setbitrate; +#&chkextinput; +#$reclengthsec = $reclengthsec + $extendrecendsec ; + +&calldigitalrecorder; + +&writelog("digitaldigitaltvrecording:RECEND:$bandtype $recch $lengthsec $stationid $sleeptype $filename $tid $countno $unittype +"); + +# -- これ以下サブルーチン ---------------------------- + + +sub prepare{ + +#引数エラー処理 +$bandtype = $ARGV[0] ; +$recch = $ARGV[1] ; +$lengthsec = $ARGV[2] ; +$stationid = $ARGV[3] ; +$sleeptype = $ARGV[4] ; +$filename = $ARGV[5] ; +$tid = $ARGV[6] ; +$countno = $ARGV[7] ; +$unittype = $ARGV[8] ; + +if (($bandtype eq "" )|| ($recch eq "")|| ($lengthsec eq "")){ + print "usage digitaltvrecording.pl bandtype ch length(sec) [stationid] [sleeptype] [filename] [TID] [NO] [unittype]\n"; + exit; +} + +my $intval = $recch % 10; # 0〜9 sec +my $startupsleep = $startupsleeptime - $intval; # 18〜27 sec +$reclengthsec = $lengthsec + (60 - $startupsleep) + 1; # + +if ( $sleeptype ne "N"){ + &writelog("digitaltvrecording: DEBUG SLEEP $startupsleeptime:$intval:$startupsleep:$reclengthsec"); + sleep ( $startupsleep); + #2008/08/12_06:39:00 digitaltvrecording: DEBUG SLEEP 17:23:-6:367 +}else{ + &writelog("digitaltvrecording: DEBUG RAPID START"); +} +## recfriio このへんどうなってるの? +#if ($recunits > 1){ +#my $deviceno = $recunits - 1;#3枚差しのとき/dev/video2から使う +# $recdevice = "/dev/video$deviceno"; +# $recch = $ARGV[0] ; +#}else{ +##1枚差し +# $recdevice = "/dev/video0"; +# $recch = $ARGV[0] ; +#} + +$outputpath = "$recfolderpath"."/"; + +if ($countno eq "0"){ + $outputfile = $outputpath.$tid."--"; +}else{ + $outputfile = $outputpath.$tid."-".$countno."-"; +} +#2番目以降のクリップでファイル名指定があったら + if ($filename ne ""){ + + $outputfile = $filename ; + $outputfile = &filenameinjectioncheck($outputfile); + $outputfilewithoutpath = $outputfile ; + $outputfile = $outputpath.$outputfile ; + &writelog("digitaltvrecording: DEBUG FILENAME ne null \$outputfile $outputfile "); + }else{ + $outputfile .= `date +%Y%m%d-%H%M --date "1 min "`; + chomp($outputfile); + $outputfile .= ".m2t"; + $outputfilewithoutpath = $outputfile ; + &writelog("digitaltvrecording: DEBUG FILENAME is null \$outputfile $outputfile "); + } + + +@wday_name = ("Sun","Mon","Tue","Wed","Thu","Fri","Sat"); +$sleepcounter = 0; +$cmd=""; + +#二重録りなど既に同名ファイルがあったら中断 +if ( -e "$outputfile" ){ + if ( -s "$outputfile" ){ + &writelog("digitaltvrecording :ABORT :recfile $outputfile exist."); + exit 1; + } +} + +}#end prepare + +sub calldigitalrecorderOld{ +# +# +#いまんところ白friioと黒friioのみ +# +# +my $oserr = 0; + +if ($bandtype == 0){ +# 地デジ friio +# b25,recfriioがあるか確認 + if ((-e "$toolpath/perl/tool/b25") && (-e "$toolpath/perl/tool/recfriio")){ + my $friiofifo = "$outputpath"."fifo-friio-"."$outputfilewithoutpath"; + my $b25fifo = "$outputpath"."fifo-b25-"."$outputfilewithoutpath"; + + if ((-e "$friiofifo") || (-e "$b25fifo")){ + &writelog("digitaltvrecording :ABORT :fifo is exist. It may be overwrite recording."); + exit 1; + }else{ + system ("mkfifo $friiofifo $b25fifo"); + # mkfifo fifo-friio-9999-01-20080810.m2t fifo-b25-9999-01-20080810.m2t + &writelog("digitaltvrecording DEBUG mkfifo $friiofifo $b25fifo: $?."); + # /home/foltia/perl/recfriio 27 30 ./fifo-friio-9999-01-20080810.m2t & /home/foltia/perl/b25 ./fifo-friio-9999-01-20080810.m2t ./fifo-b25-9999-01-20080810.m2t & dd if=./fifo-b25-9999-01-20080810.m2t of=/home/foltia/php/tv/9999-01-20080810.m2t bs=1M skip=10 +# system("$toolpath/perl/tool/recfriio $recch $reclengthsec $friiofifo & "); +# system("$toolpath/perl/tool/b25 $friiofifo $b25fifo &"); +# system("dd if=$b25fifo of=$outputfile bs=1M skip=10"); + &writelog("digitaltvrecording DEBUG $toolpath/perl/tool/recfriio $recch $reclengthsec $friiofifo & dd if=$friiofifo of=$b25fifo bs=1M skip=10 & $toolpath/perl/tool/b25 $b25fifo $outputfile: $?."); + system("dd if=$friiofifo of=$b25fifo bs=1M skip=10 & $toolpath/perl/tool/b25 $b25fifo $outputfile &"); + $oserr = system("$toolpath/perl/tool/recfriio $recch $reclengthsec $friiofifo "); + $oserr = $oserr >> 8; + system ("rm -rf $friiofifo $b25fifo"); + &writelog("digitaltvrecording DEBUG rm -rf $friiofifo $b25fifo: $?."); + if ($oserr > 0){ + # print "RECFRIIO RETURNS:$oserr\n"; + &writelog("digitaltvrecording :ERROR :friio is BUSY."); + # kill dd + $ddpid = `ps a | grep $friiofifo | grep -v grep`; + @ddpid = split(/ /,$ddpid); + $ddpid = $ddpid[0]; + chomp($ddpid); + $killcmd = "kill ".$ddpid; + system($killcmd); + &writelog("digitaltvrecording :DEBUG dd killed:$killcmd"); + + #kill b25 + $b25pid = `ps a | grep $b25fifo | grep -v grep`; + @b25pid = split(/ /,$b25pid); + $b25pid = $b25pid[0]; + chomp($b25pid); + $killcmd = "kill ".$b25pid; + system($killcmd); + &writelog("digitaltvrecording :DEBUG b25 killed:$killcmd"); + + system ("rm -rf $outputfile"); + + exit 2; + } + } + }else{ # エラー b25とrecfriioがありません + &writelog("digitaltvrecording :ERROR :recfriio or b25 not found. You must install $toolpath/b25 and $toolpath/recfriio."); + exit 1; + } + +}elsif($bandtype == 1){ + +# BS/CS friio +# b25,recfriioがあるか確認 + if ((-e "$toolpath/perl/tool/b25") && (-e "$toolpath/perl/tool/recfriiobs")){ + my $friiofifo = "$outputpath"."fifo-friioBS-"."$outputfilewithoutpath"; + my $b25fifo = "$outputpath"."fifo-b25-"."$outputfilewithoutpath"; + + if ((-e "$friiofifo") || (-e "$b25fifo")){ + &writelog("digitaltvrecording :ABORT :fifo is exist. It may be overwrite recording."); + exit 1; + }else{ + system ("mkfifo $friiofifo $b25fifo"); + &writelog("digitaltvrecording DEBUG mkfifo $friiofifo $b25fifo: $?."); + #recfriiobs用チャンネルリマップ + if ($recch == 101) { + $bssplitflag = $recch; + $recch = 22;#22 : NHK BS1/BS2 + }elsif($recch == 102){ + $bssplitflag = $recch; + $recch = 22;#22 : NHK BS1/BS2 + }elsif($recch == 103){ + $recch = 23;#23 : NHK hi + }elsif($recch == 141){ + $recch = 20;# 20 : BS-NTV + }elsif($recch == 151){ + $recch = 13;#13 : BS-Asahi + }elsif($recch == 161){ + $recch = 14;#14 : BS-i + }elsif($recch == 171){ + $recch = 16;#16 : BS-Japan + }elsif($recch == 181){ + $recch = 21;#21 : BS-Fuji + }elsif($recch == 191){ + $recch = 15;#15 : WOWOW + }elsif($recch == 192){ + $recch = 15;#15 : WOWOW + }elsif($recch == 193){ + $recch = 15;#15 : WOWOW + }elsif($recch == 211){ + $recch = 17;#17 : BS11 + }else{ + $recch = 19;#19 : TwellV + } + &writelog("digitaltvrecording DEBUG $toolpath/perl/tool/recfriiobs $recch $reclengthsec $friiofifo & dd if=$friiofifo of=$b25fifo bs=1M skip=10 & $toolpath/perl/tool/b25 $b25fifo $outputfile : $?."); + system("dd if=$friiofifo of=$b25fifo bs=1M skip=10 & $toolpath/perl/tool/b25 $b25fifo $outputfile &"); + $oserr = system("$toolpath/perl/tool/recfriiobs $recch $reclengthsec $friiofifo "); + $oserr = $oserr >> 8; + + system ("rm -rf $friiofifo $b25fifo"); + &writelog("digitaltvrecording DEBUG rm -rf $friiofifo $b25fifo: $?."); + if ($oserr > 0){ + # print "RECFRIIO RETURNS:$oserr\n"; + &writelog("digitaltvrecording :ERROR :friioBS is BUSY."); + # kill dd + $ddpid = `ps a | grep $friiofifo | grep -v grep`; + @ddpid = split(/ /,$ddpid); + $ddpid = $ddpid[0]; + chomp($ddpid); + $killcmd = "kill ".$ddpid; + system($killcmd); + &writelog("digitaltvrecording :DEBUG dd killed:$killcmd"); + + #kill b25 + $b25pid = `ps a | grep $b25fifo | grep -v grep`; + @b25pid = split(/ /,$b25pid); + $b25pid = $b25pid[0]; + chomp($b25pid); + $killcmd = "kill ".$b25pid; + system($killcmd); + &writelog("digitaltvrecording :DEBUG b25 killed:$killcmd"); + + system ("rm -rf $outputfile"); + + exit 2; + } + + #BS1/BS2などのスプリットを + if ($bssplitflag == 101){ + if (-e "$toolpath/perl/tool/TsSplitter.exe"){ + # BS1 + system("wine $toolpath/perl/tool/TsSplitter.exe -EIT -ECM -EMM -OUT \"$outputpath\" -HD -SD2 -SD3 -1SEG -LOGFILE -WAIT2 $outputfile"); + $splitfile = $outputfile; + $splitfile =~ s/\.m2t$/_SD1.m2t/; + if (-e "$splitfile"){ + system("rm -rf $outputfile ; mv $splitfile $outputfile"); + &writelog("digitaltvrecording DEBUG rm -rf $outputfile ; mv $splitfile $outputfile: $?."); + }else{ + &writelog("digitaltvrecording ERROR File not found:$splitfile."); + } + }else{ + &writelog("digitaltvrecording ERROR $toolpath/perl/tool/TsSplitter.exe not found."); + } + }elsif($bssplitflag == 102){ + if (-e "$toolpath/perl/tool/TsSplitter.exe"){ + # BS2 + system("wine $toolpath/perl/tool/TsSplitter.exe -EIT -ECM -EMM -OUT \"$outputpath\" -HD -SD1 -SD3 -1SEG -LOGFILE -WAIT2 $outputfile"); + $splitfile = $outputfile; + $splitfile =~ s/\.m2t$/_SD2.m2t/; + if (-e "$splitfile"){ + system("rm -rf $outputfile ; mv $splitfile $outputfile"); + &writelog("digitaltvrecording DEBUG rm -rf $outputfile ; mv $splitfile $outputfile: $?."); + }else{ + &writelog("digitaltvrecording ERROR File not found:$splitfile."); + } + }else{ + &writelog("digitaltvrecording ERROR $toolpath/perl/tool/TsSplitter.exe not found."); + } + }else{ + &writelog("digitaltvrecording DEBUG not split TS.$bssplitflag"); + }# endif #BS1/BS2などのスプリットを + + } + }else{ # エラー b25とrecfriioがありません + &writelog("digitaltvrecording :ERROR :recfriiobs or b25 not found. You must install $toolpath/perl/tool/b25 and $toolpath/perl/tool/recfriiobs."); + exit 1; + } +}elsif($bandtype == 2){ +}else{ + &writelog("digitaltvrecording :ERROR :Unsupported and type (digital CS)."); + exit 3; +} + + + +}#end calldigitalrecorderOld +#------------------------------------------------------------------------------------ +# +sub calldigitalrecorder{ +# +#いまんところ白friioと黒friioのみ +#2008/10/23 recfriio4仕様に変更 +# +my $oserr = 0; + +if ($bandtype == 0){ +# 地デジ friio +}elsif($bandtype == 1){ +# BS/CS friio + #recfriiobs用チャンネルリマップ + if ($recch == 101) { + $bssplitflag = $recch; + $recch = "b10";#22 : NHK BS1/BS2 + }elsif($recch == 102){ + $bssplitflag = $recch; + $recch = "b10";#22 : NHK BS1/BS2 + }elsif($recch == 103){ + $recch = "b11";#23 : NHK hi + }elsif($recch == 141){ + $recch = "b8";# 20 : BS-NTV + }elsif($recch == 151){ + $recch = "b1";#13 : BS-Asahi + }elsif($recch == 161){ + $recch = "b2";#14 : BS-i + }elsif($recch == 171){ + $recch = "b4";#16 : BS-Japan + }elsif($recch == 181){ + $recch = "b9";#21 : BS-Fuji + }elsif($recch == 191){ + $recch = "b3";#15 : WOWOW + }elsif($recch == 192){ + $recch = "b3";#15 : WOWOW + }elsif($recch == 193){ + $recch = "b3";#15 : WOWOW + }elsif($recch == 211){ + $recch = "b5";#17 : BS11 + }else{ + $recch = "b7";#19 : TwellV + } + # b6 # Star Channel + +}elsif($bandtype == 2){ +# 110度CSよくわかんない +}else{ + &writelog("digitaltvrecording :ERROR :Unsupported and type (digital CS)."); + exit 3; +} + + +# b25,recfriioがあるか確認 + if (-e "$toolpath/perl/tool/recfriio"){ + + if (! -e "$toolpath/perl/tool/friiodetect"){ + system("touch $toolpath/perl/tool/friiodetect"); + system("chown foltia:foltia $toolpath/perl/tool/friiodetect"); + system("chmod 775 $toolpath/perl/tool/friiodetect"); + &writelog("digitaltvrecording :DEBUG make lock file.$toolpath/perl/tool/friiodetect"); + } + &writelog("digitaltvrecording DEBUG recfriio --b25 --lockfile $toolpath/perl/tool/friiodetect $recch $reclengthsec $outputfile "); + $oserr = system("$toolpath/perl/tool/recfriio --b25 --lockfile $toolpath/perl/tool/friiodetect $recch $reclengthsec $outputfile "); + $oserr = $oserr >> 8; + if ($oserr > 0){ + &writelog("digitaltvrecording :ERROR :friio is BUSY.$oserr"); + exit 2; + } + }else{ # エラー recfriioがありません + &writelog("digitaltvrecording :ERROR :recfriio not found. You must install $toolpath/b25 and $toolpath/recfriio."); + exit 1; + } + +#BS1/BS2などのスプリットを +if ($bssplitflag == 101){ + if (-e "$toolpath/perl/tool/TsSplitter.exe"){ + # BS1 + system("wine $toolpath/perl/tool/TsSplitter.exe -EIT -ECM -EMM -OUT \"$outputpath\" -HD -SD2 -SD3 -1SEG -LOGFILE -WAIT2 $outputfile"); + $splitfile = $outputfile; + $splitfile =~ s/\.m2t$/_SD1.m2t/; + if (-e "$splitfile"){ + system("rm -rf $outputfile ; mv $splitfile $outputfile"); + &writelog("digitaltvrecording DEBUG rm -rf $outputfile ; mv $splitfile $outputfile: $?."); + }else{ + &writelog("digitaltvrecording ERROR File not found:$splitfile."); + } + }else{ + &writelog("digitaltvrecording ERROR $toolpath/perl/tool/TsSplitter.exe not found."); + } +}elsif($bssplitflag == 102){ + if (-e "$toolpath/perl/tool/TsSplitter.exe"){ + # BS2 + system("wine $toolpath/perl/tool/TsSplitter.exe -EIT -ECM -EMM -OUT \"$outputpath\" -HD -SD1 -SD3 -1SEG -LOGFILE -WAIT2 $outputfile"); + $splitfile = $outputfile; + $splitfile =~ s/\.m2t$/_SD2.m2t/; + if (-e "$splitfile"){ + system("rm -rf $outputfile ; mv $splitfile $outputfile"); + &writelog("digitaltvrecording DEBUG rm -rf $outputfile ; mv $splitfile $outputfile: $?."); + }else{ + &writelog("digitaltvrecording ERROR File not found:$splitfile."); + } + }else{ + &writelog("digitaltvrecording ERROR $toolpath/perl/tool/TsSplitter.exe not found."); + } +}else{ + &writelog("digitaltvrecording DEBUG not split TS.$bssplitflag"); +}# endif #BS1/BS2などのスプリットを + +}#end calldigitalrecorder + + Index: trunk/install/perl/captureimagemaker.pl =================================================================== --- trunk/install/perl/captureimagemaker.pl (リビジョン 1) +++ trunk/install/perl/captureimagemaker.pl (リビジョン 83) @@ -100,5 +100,5 @@ # $captureimgdir = "$tid"."-"."$countno"."-"."$date"."-"."$time"; $captureimgdir = $filename; -$captureimgdir =~ s/\.m2p$//; +$captureimgdir =~ s/\.m2p$|\.m2t$//; unless (-e "$capimgdirname/$captureimgdir"){ @@ -118,4 +118,10 @@ #　10秒ごとに -system ("mplayer -ss 00:00:10 -vo jpeg:outdir=$capimgdirname/$captureimgdir/ -vf crop=690:460:12:10,scale=160:120 -ao null -sstep 9 -v 3 $recfolderpath/$filename"); +if ($filename =~ /m2t$/){ + &writelog("captureimagemaker DEBUG mplayer -ss 00:00:10 -vo jpeg:outdir=$capimgdirname/$captureimgdir/ -vf scale=192:108 -ao null -sstep 9 -v 3 $recfolderpath/$filename"); + system ("mplayer -ss 00:00:10 -vo jpeg:outdir=$capimgdirname/$captureimgdir/ -vf scale=192:108 -ao null -sstep 9 -v 3 $recfolderpath/$filename"); +}else{ + &writelog("captureimagemaker DEBUG mplayer -ss 00:00:10 -vo jpeg:outdir=$capimgdirname/$captureimgdir/ -vf crop=690:460:12:10,scale=160:120 -ao null -sstep 9 -v 3 $recfolderpath/$filename"); + system ("mplayer -ss 00:00:10 -vo jpeg:outdir=$capimgdirname/$captureimgdir/ -vf crop=690:460:12:10,scale=160:120 -ao null -sstep 9 -v 3 $recfolderpath/$filename"); +} Index: trunk/install/perl/tvrecording.pl =================================================================== --- trunk/install/perl/tvrecording.pl (リビジョン 79) +++ trunk/install/perl/tvrecording.pl (リビジョン 83) @@ -5,5 +5,5 @@ # #tvrecording.pl -# record-v4l2.plに準備処理を加えた録画モジュール。 +# record-v4l2.plを呼びだす録画モジュール。 # #usage tvrecording.pl ch length(sec) [clip No(000-)] [filename] [bitrate(5)] [TID] [NO] [/dev/video0] @@ -44,5 +44,5 @@ #$startupsleeptime = 52; #process wait(MAX60sec) $startupsleeptime = 37; #process wait(MAX60sec) -#$startupsleeptime = 1; #process wait(MAX60sec) + #------------------------------- @@ -64,5 +64,6 @@ $recfolderpath = '/home/foltia/php/tv'; }#end sub getRecPath - +# +# -- ここからメイン ---------------------------- #準備 &prepare; @@ -74,9 +75,9 @@ $reclengthsec = $reclengthsec + $extendrecendsec ; +&callrecordv4l; + &writelog("tvrecording:$recch:$reclengthsec:$outputfile:$recdevice:$capturedeviceinputnum:$ivtvrecch:$stdbitrate:$peakbitrate"); -#------------------------------ - - +# -- これ以下サブルーチン ---------------------------- sub chkextinput{ @@ -87,5 +88,5 @@ $capturedeviceinputnum = 7 ; } - $capturedeviceinputName = "S-Video 0"; + $capturedeviceinputName = "S-Video 1"; $ivtvrecch = ''; }elsif($recch == -1){ @@ -95,5 +96,5 @@ $capturedeviceinputnum = 8; } - $capturedeviceinputName = "Composite 0"; + $capturedeviceinputName = "Composite 1"; $ivtvrecch = ''; }else{ @@ -103,5 +104,5 @@ $capturedeviceinputnum = 6 ; } - $capturedeviceinputName = "Tuner 0"; + $capturedeviceinputName = "Tuner 1"; $ivtvrecch = $recch; } @@ -304,15 +305,15 @@ $outputfile = $ARGV[3]; $outputfile = &filenameinjectioncheck($outputfile); + $outputfilewithoutpath = $outputfile ; $outputfile = $outputpath.$outputfile ; # $outputfile .= "$ARGV[3]"; # $outputfile .= `date +%Y%m%d-%H%M --date "1 min "`; - &writelog("tvrecording: DEBUG ARGV[3] ne null \$outputfile $outputfile "); - + &writelog("tvrecording: DEBUG ARGV[2] ne null \$outputfile $outputfile "); }else{ - $outputfile .= `date +%Y%m%d-%H%M --date "1 min "`; - chomp($outputfile); - $outputfile .= ".m2p"; -&writelog("tvrecording: DEBUG ARGV[3] is null \$outputfile $outputfile "); - + $outputfile .= `date +%Y%m%d-%H%M --date "1 min "`; + chomp($outputfile); + $outputfile .= ".m2p"; + $outputfilewithoutpath = $outputfile ; + &writelog("tvrecording: DEBUG ARGV[2] is null \$outputfile $outputfile "); } @@ -341,1490 +342,32 @@ }#end setbitrate -#------------------------------------------------------------------------------------------------- -# record-v4l2.pl created by James A. Pattie 04/10/2003 -# Copyright 2003 -# Purpose: to record from the specified channel for the specified amount -# of time to the video OutputDirectory under the channel-start time name as video.mpg. - -# -# You can always get the latest version of this script at -# http://www.pcxperience.org/ -# - -#2003.11.18 patched by DCC-JPL - -# 20030425 - 1.4 - Added devfs support based upon patch submitted by -# Jonathan Kolb -# 20030426 - 1.5 - Imported the ptune.pl functionality -# 20030426 - 1.6 - moved -F -> -L, -F now lets you specify the frequency to tune to. -# 20030427 - 1.7 - renamed to record_ivtv.pl per Kevin's request. Added -R option. -# 20030430 - 1.8 - fixing some comparisons that needed to be strings, etc. -# 20030504 - 1.9 - Migrating to Video::ivtv for video resolution support. -# 20030505 - 1.10- Replaced open w/ sysopen but it doesn't make a difference. -# Starting to replace the Standard code w/ Video::ivtv methods. -# Added the version numbers that I require to the use statements. -# 20030507 - 1.11- Migrated to using get/setFrequency from Video::ivtv 0.03. -# 20030510 - 1.12- Migrated to using get/setInput from Video::ivtv 0.04. Moved to using -# the exported method names rather than Video::ivtv::method(). -# Converted to using enumerateStandard(). -# Fixed the condition where switching Video Standards will most likely -# not get the correct channel and so would switch back with channel = 0 -# which is invalid. In this case I store the previous frequency, do the -# channel change but signal to restore the previous frequency on cleanup. -# Converted to using enumerateInput(). -# 20030512 - 1.13- Added initial support for setting the bitrate/bitrate_peak values. -# 20030513 - 1.14- Tweaked the bitrate values to be closer to real DVD bitrates. -# Added support for the .ivtvrc config file and User Profiles. -# 20030516 - 1.15- Updated to the OO interface that Video::ivtv 0.06 now requires. -# Cleaned up a lot of the global variables into a settings hash. -# Made the -S command add any config items you specified on the command line -# that were not in the Profile being updated. This way you can add new items. -# Made the config file work from a mapping hash so that we can easily add/remove -# config items in the future. -# 20030518 - 1.16- Fixed a Frequency bug that happened when changing Video Standards and the -# Frequency came from a user specified Profile. -# 20030519 - 1.17- Adding the rest of the Codec related options to the config file / defaults. -# Switched to using Getopt::Long. You can specify all config file options at -# least by a --long version and still by the original -X command option. -# Cleaned up the option parsing code to take advantage of the mappings hash. -# 20030520 - 1.18- Fixing the handling of the Profile command line option. -# 20030524 - 1.19- Cleaned up the output for -L/--list-freqtable. Changed --list -> --list-freqtable. -# Added support to detect the v4l2 driver in use and disable the ivtv "enhancements" -# if driver != "ivtv". -# Renamed to record-v4l2.pl to reflect the ability of this program to record from any -# v4l2 device but with special support for the ivtv driver. -# 20030524 - 1.20- Improving the Ctrl-C handling (cleanup before dying). It may take a second or two -# before the program exits, but it should exit after resetting anything it changed, unless -# you had specified not to reset the card. -# Allow layering of profiles by calling -P/--profile multiple times. Each profile will -# be layered over the last. You will not be able to create/update a profile if you -# specify more than one though. -# Fixed a bug that would cause a parameter from the profile to be set n times, where n was -# the number of characters in the mapping string that consisted of the single letter | and -# the long command option name. Ex: Channel has 'c|channel' so the Channel value was being -# set 9 times instead of just the first time if it was in the profile. -# 20030525 - 1.21- Fixed devfsd detection code as it was overriding what came from the config file. -# Adding --no-record option so that we can start to implement the replacement functionality for -# ptune.pl (ie. Set all values and then exit, do not reset the card and do not capture) -# 20030607 - 1.22- Adding --directory-format and --date-format options so that the user can specify the -# naming convention to use when specifying the directory the output file should be put in. -# Tweaked some of the defaults. -# Create the config file if it doesn't exist, regardless of the --save flag being specified. -# Added method error() to output an error condition that doesn't warrant the whole usage and -# converted all relevant usage() calls to error() calls. -# Added option --debug to dynamically on the fly enable debug output. -# 20030609 - 1.23- Added option --list-channels to display the currently selected frequency tables contents. -# Changed the default output directory to '.'. -# Moved $debug -> $settings{Debug} so it can be stored in the config file. This allows you to -# turn debugging on for only certain profiles, etc. -# Restructured some of the validity tests to only happen as long as we are recording since they -# do not need to be validated when we are not recording. Mainly to do with the output stuff. -# 20030610 - 1.24- Moved the tunerNum variable into the config file: TunerNum -# Added --tuner-num option to dynamically set it. -# 20030614 - 1.25- I now require Video::ivtv 0.09 to make sure everyone is using the version that fixes the known -# reported segfault issues. -# Added freqtable "custom" support so that people using the new feature in ptune-ui.pl and have -# set their default frequency table to be "custom" will just work when they specify channel X, etc. -# I'm now sorting the command line input since otherwise I can't guarantee the order options get -# processed in, but even that is wrong. I need to use Tie::IxHash, but that isn't standard. -# 20030626 - 1.26- Updated to cover the audio -> audio_bitmask changes that Video::ivtv 0.11 implemented to cover -# the ivtv_ioctl_codec structure changes. -# Implemented config file versioning so that I know when the Audio entry needs to be updated in case it -# comes back in a future version of the ivtv_ioctl_codec structure. -# 20030628 - 1.27- Adding --list-inputs and --list-standards to display the available inputs and video standards. -# 20030713 - 1.28- Added code to make sure the codec properties are proper when switching standard to PAL/SECAM. -# Added config options SetMSPMatrix, MSPInput, MSPOutput, MSPSleep to allow the user to specify if they -# want the msp matrix updated any time the Video Standard is changed and to specify what they want programmed. -# Bumping the config file version to 2 to account for the new options. -# 20030715 - 1.29- Adding the missing msp matrix reset code in the reset section. -# Adding codec checks to make sure that they are right for NTSC. -# Made it legal to specify the channel by itself without -c/--channel. - - -#use strict; -use Getopt::Long qw(:config no_ignore_case bundling); -use Fcntl; -use Video::Frequencies 0.03; -use Video::ivtv 0.12; -use Config::IniFiles; - -my $version="1.29"; -my $cfgVersion = "2"; -my $cfgVersionStr = "_configVersion_"; # hopefully unique [defaults] value to let me know what version the config file is. - -my @capabilities = (); # The cards capabilities - -my %settings = ( - Channel => $ivtvrecch , # default to the ivtv default channel - RecordDuration => $reclengthsec , # default to 59 minutes 50 seconds (in seconds) - This lets 2 back to back cron jobs work! - InputNum => $capturedeviceinputnum , # TV-Tuner 0 on GV-MVP/RX $capturedeviceinputnum - InputName => "$capturedeviceinputName", - OutputDirectory => "$recfolderpath", - VideoDevice => "$recdevice", - VideoWidth => "720", # 720x480-fullscreen NTSC - VideoHeight => "480", - VideoStandard => "NTSC", # NTSC, PAL or SECAM - VideoType => "mpeg", # mpeg, yuv - Bitrate => "$stdbitrate", - PeakBitrate => "$peakbitrate", # peak bitrate - Aspect => 2, - AudioBitmask => 0x00e9, - BFrames => 3, - DNRMode => 0, - DNRSpatial => 0, - DNRTemporal => 0, - DNRType => 0, - Framerate => 0, - FramesPerGOP => 15, - GOPClosure => 1, - Pulldown => 0, - StreamType => 0, # 10 = DVD format (almost) - OutputFileName => "$outputfile", - FrequencyTable => "$frequencyTable", # default to NTSC_CABLE mapping. - Frequency => "", # user specified frequency. - ResetCardSettings => 1, - ConfigFileName => "$ENV{HOME}/.ivtvrc", - UpdateConfigFile => 0, - UseConfigFile => 0, - UsingIvtvDriver => 1, # default to being able to use the ivtv "enhancements". - DontRecord => 0, # default to always recording data. - DirectoryFormatString => " ", # format string used to define the sub directory under OutputDirectory - DateTimeFormatString => "+%Y%m%d-%H%M", # format string used to represent the date/time if the user wants it in their DirectoryFormatString - # define the Codec related min/max values - minBitrate => 1, - maxBitrate => 14500000, - minPeakBitrate => 1500, - maxPeakBitrate => 16000000, - # msp matrix settings - SetMSPMatrix => 1, - MSPInput => 3, - MSPOutput => 1, - MSPSleep => 2, # number of seconds the card needs before we can set the msp matrix. - # other settings - Debug => 0,#DEBUG - TunerNum => 0, -); - - -print " $settings{InputNum} / $settings{InputName} /IVTVRECCH:$settings{Channel}/$recdevice \n\n" if $settings{Debug}; - - -my $result=""; -my @profileNames=(); # list of user defined sections to work with in the config file. -my %configIni; # config hash we tie to for Config::IniFiles. -my $ivtvObj = Video::ivtv->new(); - -# map the Settings/Config file parameter to the command line variable that specifies it. -my %mappings = ( - "Channel" => "c|channel", - "RecordDuration" => "t|duration", - "InputNum" => "i|inputnum", - "InputName" => "I|inputname", - "OutputDirectory" => "D|directory", - "VideoDevice" => "d|input", - "VideoWidth" => "W|width", - "VideoHeight" => "H|height", - "VideoStandard" => "s|standard", - "VideoType" => "T|type", - "Bitrate" => "b|bitrate", - "PeakBitrate" => "B|peakbitrate", - "Aspect" => "aspect", - "AudioBitmask" => "audio-bitmask", - "BFrames" => "bframes", - "DNRMode" => "dnrmode", - "DNRSpatial" => "dnrspatial", - "DNRTemporal" => "dnrtemporal", - "DNRType" => "dnrtype", - "Framerate" => "framerate", - "FramesPerGOP" => "framespergop", - "GOPClosure" => "gopclosure", - "Pulldown" => "pulldown", - "StreamType" => "streamtype", - "OutputFileName" => "o|output", - "FrequencyTable" => "f|freqtable", - "Frequency" => "F|frequency", - "ResetCardSettings" => "R|noreset", - "DirectoryFormatString" => "directory-format", - "DateTimeFormatString" => "date-format", - "Debug" => "debug", - "TunerNum" => "tuner-num", - "SetMSPMatrix" => "set-msp-matrix", - "MSPInput" => "msp-input", - "MSPOutput" => "msp-output", - "MSPSleep" => "msp-sleep", - "OutputMPGFileName" => "outputmpgfilename", - ); - -my %codecMappings = ( - "Aspect" => "aspect", - "AudioBitmask" => "audio_bitmask", - "BFrames" => "bframes", - "Bitrate" => "bitrate", - "PeakBitrate" => "bitrate_peak", - "DNRMode" => "dnr_mode", - "DNRSpatial" => "dnr_spatial", - "DNRTemporal" => "dnr_temporal", - "DNRType" => "dnr_type", - "Framerate" => "framerate", - "FramesPerGOP" => "framespergop", - "GOPClosure" => "gop_closure", - "Pulldown" => "pulldown", - "StreamType" => "stream_type", - ); - -# check for devfs support -if ( -e "/dev/.devfsd" ) -{ - $settings{VideoDevice} = "/dev/v4l/video0"; -} - -## check for the config file -#if (-f $settings{ConfigFileName}) -#{ -# $settings{UseConfigFile} = 1; -# -# # tie to it. -# tie %configIni, 'Config::IniFiles', (-file => $settings{ConfigFileName}) or die "Error: Opening config file '$settings{ConfigFileName}' failed! $!\n"; -# -# my $profile = "defaults"; -# if (exists $configIni{$profile}) -# { -# my $saveFile = 0; -# # check version of the config file. -# if (!exists $configIni{$profile}{$cfgVersionStr}) -# { -# print "Updating config file to version 1...\n"; -# -# # first version config file! Update the Audio -> AudioBitmask entries. -# $configIni{$profile}{$cfgVersionStr} = 1; -# -# # find all entries that have Audio and move to AudioBitmask. -# foreach my $p (keys %configIni) -# { -# if (exists $configIni{$p}{Audio}) -# { -# $configIni{$p}{AudioBitmask} = $configIni{$p}{Audio}; -# delete $configIni{$p}{Audio}; -# } -# } -# -# $saveFile = 1; # signal we need to save the config changes. -# } -# if ($configIni{$profile}{$cfgVersionStr} != $cfgVersion) -# { -# # we need to upgrade -# if ($configIni{$profile}{$cfgVersionStr} == 1) -# { -# print "Updating config file to version 2...\n"; -# # add the MSP Matrix related options. -# $configIni{$profile}{SetMSPMatrix} = $settings{SetMSPMatrix}; -# $configIni{$profile}{MSPInput} = $settings{MSPInput}; -# $configIni{$profile}{MSPOutput} = $settings{MSPOutput}; -# $configIni{$profile}{MSPSleep} = $settings{MSPSleep}; -# $configIni{$profile}{$cfgVersionStr} = 2; -# $saveFile = 1; -# } -# } -# -# if ($saveFile) -# { -# # now save the updated config file before we continue. -# tied(%configIni)->RewriteConfig or die "Error: Writing config file '$settings{ConfigFileName}' failed! $!\n"; -# } -# -# # update the defaults stored. -# foreach my $arg (keys %mappings) -# { -# if (exists $configIni{$profile}{$arg}) -# { -# $settings{$arg} = $configIni{$profile}{$arg}; -# print "settings{$arg} = '" . $settings{$arg} . "'\n"; -# } -# } -# } -# else -# { -# print "Warning: config file '$settings{ConfigFileName}' exists but does not have the\n[$profile] section! Use -S to create it without specifying -P.\n\n"; -# } -#} -#else # create the config file -#{ -# print "Auto Creating config file $settings{ConfigFileName}...\n"; -# my $profile = "defaults"; -# -# # we have to create the config file and tie to it. -# tie %configIni, 'Config::IniFiles', () or die "Error: Initializing config file '$settings{ConfigFileName}' failed! $!\n"; -# -# # now set the name to work with. -# tied(%configIni)->SetFileName($settings{ConfigFileName}) or die "Error: Setting config file to '$settings{ConfigFileName}' failed! $!\n"; -# -# $configIni{$profile} = {}; # make sure the section exists. -# -# foreach my $arg (keys %mappings) -# { -# $configIni{$profile}{$arg} = $settings{$arg}; -# print "configIni{$profile}{$arg} = '" . $settings{$arg} . "'\n" if $settings{Debug}; -# } -# -# # set the config file version -# $configIni{$profile}{$cfgVersionStr} = $cfgVersion; -# -# # write the config file out. -# tied(%configIni)->RewriteConfig or die "Error: Writing config file '$settings{ConfigFileName}' failed! $!\n"; -#} - -# build up the "custom" frequency table -my %customMap = (); -foreach my $profileName (keys %configIni) -{ - next if $profileName =~ /^(defaults)$/; - - if (exists $configIni{$profileName}{Frequency}) - { - $customMap{$profileName} = $configIni{$profileName}{Frequency}; - } -} -$CHANLIST{custom} = \%customMap; - -# enumerations -my @standards; -my %name2std; -my @inputs; -my %name2input; -my @codecInfo; # stores the Codec Info -my @newCodecInfo; # the version we mess with. -# Current settings (Input, Channel, Standard) -my $curinput; -my $curinputName; -my $std; -my $curstd = "???"; -my $curStandard = 0; # numeric representation. -my $curChannel = 0; -my $curFrequency = 0; - -my $tuner; -my $err; -my $v4l2input; - -my $tmpDirectoryStr = formatDirectoryString(); -my $versionStr = "record-v4l2.pl $version for use with http://ivtv.sf.net/"; -my $usageStr = <<"END_OF_USAGE"; -$versionStr - -Usage: record-v4l2.pl [--channel CHANNEL] [--duration TIME] - [--directory DIRECTORY] [--output OUTPUT] - [--directory-format FORMAT] [--date-format FORMAT] - [--input VIDEO_DEV][--width WIDTH --height HEIGHT] - [--standard STANDARD] [--type TYPE] - [--inputnum INPUT#] [--inputname INPUT NAME] - [--freqtable FREQENCY MAP] [--frequency FREQUENCY] - [--bitrate BITRATE] [--peakbitrate PEAK_BITRATE] - [--set-msp-matrix BOOL] [--msp-sleep SLEEP] - [--msp-input INPUT] [--msp-output OUTPUT] - [--profile PROFILE] [--list-freqtable] [--list-channels] - [--no-record] [--noreset] [--save] [--help] [--version] - [--aspect ASPECT] [--audio-bitmask AUDIO-BITMASK] [--bframes BFRAMES] - [--dnrmode DNRMODE] [--dnrspatial DNRSPATIAL] - [--dnrtemporal DNRTEMPORAL] [--dnrtype DNRTYPE] - [--framerate FRAMERATE] [--framespergop FRAMESPERGOP] - [--gopclosure GOPCLOSURE] [--pulldown PULLDOWN] - [--streamtype STREAMTYPE] [--debug] - [--tuner-num TUNERNUM] - [--list-inputs] [--list-standards] [CHANNEL] - - -c/--channel CHANNEL: channel number to switch to - NOTE: You can also specify the channel by itself. - Ex. record-v4l2.pl 73 - would change to channel 73 using the default settings - or the settings from your ~/.ivtvrc config file. - -t/--duration TIME: number of seconds to record - -D/--directory DIRECTORY: Base directory to record into - --directory-format FORMAT: format string that specifies the - sub-directory to create under the base directory that - the output file will be created in. This can be empty - to indicate no sub-directory should be created. - - Available tokens are: - %d - date formatted by --date-format - %I - input name recorded from - Any white space in the name is converted to - underscores (_). Ex. 'Tuner 0' => 'Tuner_0' - - %c - channel or "freq-#" frequency - - --date-format FORMAT: format string that specifies the - date format string to generate and substitute for - %d in the --directory-format string. - - Available tokens: see the date commands man page. - The string must start with a + (plus). - - -o/--output OUTPUT: name of file to create - -d/--input VIDEO_DEV: video device to capture from - -W/--width WIDTH: width of screen (720 for NTSC fullscreen) - -H/--height HEIGHT: height of screen (480 for NTSC fullscreen) - -s/--standard STANDARD: NTSC, PAL or SECAM - video standard to record in - -T/--type TYPE: mpeg or yuv output - -i/--inputnum INPUT#: - The index number of the input you want to use (0 -> n-1) - -I/--inputname INPUT NAME: The name of the input you want to use. - -f/--freqtable FREQUENCY MAP: Specify the frequency mapping to use. - -F/--frequency FREQUENCY: Specify the frequency to tune to. - ex. 517250 = NTSC Cable 73 (SCiFi) - --tuner-num TUNERNUM: Specify the tuner to use. - --set-msp-matrix BOOL: 1 - set the msp matrix after Video Standard changes - 0 - never set the msp matrix - Uses the --msp-input and --msp-output options. - --msp-sleep SLEEP: number of seconds the card needs before we can program - the msp matrix. - --msp-input INPUT: Specify the input parameter to program the msp matrix. - Valid values are from 1 - 8. - --msp-output OUTPUT: Specify the output parameter to program the msp matrix. - Valid values are from 0 - 3. - -L/--list-freqtable: - list all available frequency mappings that Video::Frequencies knows - --list-channels: lists all channels and their frequencies for the - specified frequency table being used. - --list-inputs: lists all inputs the v4l2 driver reports. - --list-standards: lists all Video Standards the v4l2 driver supports. - -R/--noreset: Do not Reset anything that was changed - (standard, channel, resolution, etc.) - --no-record: Do not create any directories, capture data or reset the card - back to original settings. This is the ptune.pl mode. - -h/--help: display this help - -v/--version: display the version of this program - --debug: turns on debug output - - Codec related options: - -b/--bitrate BITRATE: Specify the Bitrate to capture at - -B/--peakbitrate PEAK_BITRATE: Specify the Peak Bitrate to capture at - --aspect ASPECT: Specify the aspect value - --audio-bitmask AUDIO-BITMASK: Specify the audio bitmask value - --bframes BFRAMES: Specify the bframes value - --dnrmode DNRMODE: Specify the dnr_mode value - --dnrspatial DNRSPATIAL: Specify the dnr_spatial value - --dnrtemporal DNRTEMPORAL: Specify the dnr_temporal value - --dnrtype DNRTYPE: Specify the dnr_type value - --framerate FRAMERATE: Specify the framerate value - --framespergop FRAMESPERGOP: Specify the framespergop value - --gopclosure GOPCLOSURE: Specify the gop_closure value - --pulldown PULLDOWN: Specify the pulldown value - --streamtype STREAMTYPE: Specify the stream_type value - - Config file related options: - -P/--profile PROFILE: Override defaults and command line values with the - config entries in the section labeled [PROFILE] from the - config file $settings{ConfigFileName}. - Examples: -P NTSC-DVD, -P PAL-DVD, --profile MY-SETTINGS - - You can specify this option multiple times and each successive - profile will overlay the defaults and any previous profiles. - You will not be able to create/update a profile if you do - specify multiple profiles. - -S/--save: save the current values as the defaults in - $settings{ConfigFileName}. - If -P/--profile PROFILE is specified, then those values that exist in - the specified profile will be updated. If the profile doesn't exist, - then it will be created, but will have all possible config items - defined in it. It will be your responsibility to hand check the - config file and remove any config items you do not want set for - that profile. - Any options specified on the command line will override options - defined in the config file. - -Notes: - If you specify both -i/--inputnum and -I/--inputname then - -i/--inputnum will take precedence. - - If you specify both -c/--channel and -F/--frequency then - -F/--frequency will take precedence. - - If you use a Profile, it has the ability to override all command line - arguments, so check your Profile first if things seem to be ignored. - -Defaults: - --duration $settings{RecordDuration} --input $settings{VideoDevice} --width $settings{VideoWidth} --height $settings{VideoHeight} --standard $settings{VideoStandard} - --type $settings{VideoType} --directory $settings{OutputDirectory} --output $settings{OutputFileName} - --directory-format "$settings{DirectoryFormatString}" --date-format "$settings{DateTimeFormatString}" - --inputnum $settings{InputNum} --inputname '$settings{InputName}' --freqtable $settings{FrequencyTable} - --set-msp-matrix $settings{SetMSPMatrix} --msp-sleep $settings{MSPSleep} --msp-input $settings{MSPInput} --msp-output $settings{MSPOutput} - --bitrate $settings{Bitrate} --peakbitrate $settings{PeakBitrate} --aspect $settings{Aspect} --audio-bitmask $settings{AudioBitmask} --bframes $settings{BFrames} - --dnrmode $settings{DNRMode} --dnrspatial $settings{DNRSpatial} --dnrtemporal $settings{DNRTemporal} --dnrtype $settings{DNRType} - --framerate $settings{Framerate} --framespergop $settings{FramesPerGOP} --gopclosure $settings{GOPClosure} --pulldown $settings{Pulldown} --streamtype $settings{StreamType} - --tuner-num $settings{TunerNum} - - config file = '$settings{ConfigFileName}' - - If Channel = $settings{Channel}, this would create: - $tmpDirectoryStr$settings{OutputFileName} - - Note: This script relies on Perl Modules: Video::Frequencies, Video::ivtv, - Config::IniFiles and Getopt::Long. -END_OF_USAGE - -# handle user input here -my %opts; -#getopts('c:t:o:hd:W:H:s:T:D:vi:I:f:F:LRb:B:P:S', \%opts); -GetOptions(\%opts, "channel|c=s", "duration|t=i", "output|o=s", "help|h", "input|d=s", "width|W=i", "height|H=i", "standard|s=s", - "type|T=s", "directory|D=s", "version|v", "inputnum|i=i", "inputname|I=s", "freqtable|f=s", "frequency|F=i", "list-freqtable|L", - "noreset|R", "bitrate|b=i", "peakbitrate|B=i", "profile|P=s@", "save|S", "aspect=i", "audio-bitmask=s", "bframes=i", "dnrmode=i", "dnrspatial=i", - "dnrtemporal=i", "dnrtype=i", "framerate=i", "framespergop=i", "gopclosure=i", "pulldown=i", - "streamtype=i", "no-record", "directory-format=s", "date-format=s", "debug", "list-channels", - "tuner-num=i", "list-inputs", "list-standards", "set-msp-matrix=i", "msp-input=i", "msp-output=i", "outputmpgfilename=s"); -if (scalar keys %opts == 0 && @ARGV == 0) -{ - usage(0, ""); -} -foreach my $option (sort keys %opts) -{ - my $found = 0; - foreach my $mapName (keys %mappings) - { - if ($option =~ /^($mappings{$mapName})$/) - { - $settings{$mapName} = $opts{$option}; - $found = 1; - print "$mapName = '$opts{$option}'\n" if $settings{Debug}; - } - } - if (!$found) - { - # handle the non-settings cases. - if ($option =~ /^(L|list-freqtable)$/) - { - my $errStr = "\nAvailable Frequency Mappings:\n"; - foreach my $name (sort keys %CHANLIST) - { - $errStr .= "$name\n"; - } - print "$versionStr\n$errStr"; - exit 0; - } - elsif ($option eq "list-channels") - { - my $errStr = "\nAvailable Channels for $settings{FrequencyTable}:\n"; - foreach my $name (sort { $a <=> $b } keys %{$CHANLIST{$settings{FrequencyTable}}}) - { - $errStr .= "$name\t= $CHANLIST{$settings{FrequencyTable}}->{$name}\n"; - } - print "$versionStr\n$errStr"; - exit 0; - } - elsif ($option =~ /^(no-record)$/) - { - $settings{DontRecord} = 1; - } - elsif ($option =~ /^(S|save)$/) - { - $settings{UpdateConfigFile} = 1; - } - elsif ($option =~ /^(P|profile)$/) - { - @profileNames = @{$opts{$option}}; - } - elsif ($option =~ /^(v|version)$/) - { - print "$versionStr\n"; - exit 0; - } - elsif ($option =~ /^(h|help)$/) - { - usage(0, ""); - } - elsif ($option =~ /^(list-inputs|list-standards)$/) - { - # do nothing for now since they will be handled later. - } - - else - { - usage(1, "-$option is an unknown option!"); - } - } -} - -if (@profileNames) -{ - # loop over all profiles the user specified. - foreach my $profileName (@profileNames) - { - print "profile = '$profileName'\n" if $settings{Debug}; - # for now the profile can not be "defaults". - if ($profileName eq "defaults") - { - error(1, "Profile = '$profileName' is invalid!"); - } - if (exists $configIni{$profileName}) - { - # update defaults/override command line arguments that exist in this profile. - my $profileUpdating = (((exists $opts{S} || exists $opts{save}) && @profileNames == 1) ? 1 : 0); - my $profile = $profileName; - - foreach my $arg (keys %mappings) - { - foreach my $option (split(/\|/, $mappings{$arg})) # handle the long/short command option versions - { - #print "arg = '$arg', option = '$option'\n" if $settings{Debug}; - if (exists $configIni{$profile}{$arg} && !($profileUpdating && exists $opts{$option})) - { - $settings{$arg} = $configIni{$profile}{$arg}; - print "settings{$arg} = '" . $settings{$arg} . "'\n" if $settings{Debug}; - last; - } - } - } - } - else - { - if ($settings{UpdateConfigFile} && @profileNames == 1) - { - print "Warning: Profile = '$profileName' will be created.\n" if ($settings{Debug}); - } - else - { - error(1, "Profile = '$profileName' does not exist! You must specify -S/--save to create it."); - } - } - } -} - -# verify input - -if (@ARGV) -{ - if (exists $opts{c} || exists $opts{channel}) - { - print "Warning: ignoring channel argument and using '$ARGV[0]' instead.\n"; - } - $settings{Channel} = $ARGV[0]; -} - -if (!$settings{DontRecord}) -{ - print "RecordDuration = $settings{RecordDuration}\n" if $settings{Debug}; - - if ($settings{VideoType} !~ /^(mpeg|yuv)$/) - { - error(1, "Video Type = '$settings{VideoType}' is invalid!"); - } - if ($settings{VideoType} eq "yuv") - { - # see if we need to change our defaults. - if (!exists $opts{o} && !exists $opts{output}) - { - $settings{OutputFileName} = "video.yuv"; - } - if (!exists $opts{d} && !exists $opts{input}) - { - if ( -e "/dev/.devfsd" ) - { - $settings{VideoDevice} = "/dev/v4l/yuv0"; - } - else - { - $settings{VideoDevice} = "/dev/yuv0"; - } - } - } -} - -if ( ! -c "$settings{VideoDevice}") -{ - error(1, "Video Dev = '$settings{VideoDevice}' is invalid! $!"); -} - -# now that the video device has been semi validated, we can use it to lookup -# the inputs, standards, etc. and use that for validating some of the following -# pieces of user input. -sysopen($tuner, $settings{VideoDevice}, O_RDWR) or die "Error unable to open '$settings{VideoDevice}': $!"; -my $tunerFD = fileno($tuner); - -# get the current capabilities. -@capabilities = $ivtvObj->getCapabilities($tunerFD); -if (@capabilities != keys %{$ivtvObj->{capIndexes}}) -{ - error(1, "getCapabilities() failed!"); -} -if ($capabilities[$ivtvObj->{capIndexes}{driver}] ne "ivtv") -{ - $settings{UsingIvtvDriver} = 0; # we can't use the ivtv "enhancements". - print "Warning: V4l2 driver = '$capabilities[$ivtvObj->{capIndexes}{driver}]' does not support the ivtv \"enhancements\"!\n"; - print " All codec related options will be ignored.\n\n"; -} - -my $i; - -# get the current video standard -$std = $ivtvObj->getStandard($tunerFD); -if ($std > 0) -{ - printf("Standard: 0x%08x\n",$std) if ($settings{Debug}); -} -else -{ - die "Error: getStandard() failed!\n"; -} - -# get the current input -$curinput = $ivtvObj->getInput($tunerFD); -if ($curinput < 0) -{ - die "Error: getInput() failed!\n"; -} -printf("Input: 0x%08x\n",$curinput) if ($settings{Debug}); - -my $done=0; -# Standards -for ($i=0; !$done; ++$i) -{ - my($index,$std_id,$name,$frameperiod_n,$frameperiod_d,$framelines) = $ivtvObj->enumerateStandard($tunerFD, $i); - if ($index == -1) - { - $done = 1; - } - else - { - printf("%d 0x%08x %s %d/%d %d\n",$index,$std_id,$name,$frameperiod_n,$frameperiod_d,$framelines) if ($settings{Debug}); - push @standards, [($name,$std_id)]; - $name2std{$name} = $std_id; - if( (($std_id & $std) == $std)) - { - $curstd = $name; - $curStandard = $std; - } - } -} - -if (exists $opts{'list-standards'}) -{ - print "$versionStr\n"; - print "Available Video Standards:\n"; - foreach my $standard (@standards) - { - print "$standard->[0]\n"; - } - exit 0; -} - -$done=0; -# Inputs -for ($i=0; !$done; ++$i) -{ - my($index,$name,$type,$audioset,$tuner,$std,$status) = $ivtvObj->enumerateInput($tunerFD, $i); - if ($index == -1) - { - $done = 1; - } - else - { - push @inputs, $name; - $name2input{$name} = $index; - } -} -$curinputName = $inputs[$curinput]; - -if (exists $opts{'list-inputs'}) -{ - print "$versionStr\n"; - print "Available Inputs:\n"; - my $counter = 0; - foreach my $input (@inputs) - { - print "$counter: $input\n"; - $counter++; - } - exit 0; -} - -if ($settings{UsingIvtvDriver}) -{ - # get the current Codec Info - @codecInfo = $ivtvObj->getCodecInfo($tunerFD); - if (@codecInfo != keys %{$ivtvObj->{codecIndexes}}) - { - error(1, "getCodecInfo() failed!"); - } - @newCodecInfo = $ivtvObj->getCodecInfo($tunerFD); - if (@newCodecInfo != keys %{$ivtvObj->{codecIndexes}}) - { - error(1, "getCodecInfo() failed!"); - } -} - -# finish validating the user input. - -if (!$settings{DontRecord}) -{ - if ($settings{RecordDuration} !~ /^(\d+)$/) - { - error(1, "Time = '$settings{RecordDuration}' is invalid!"); - } - - if ( ! -d "$settings{OutputDirectory}") - { - error(1, "Directory = '$settings{OutputDirectory}' is invalid! $!"); - } - - # assume for now we are only generating mpeg files. -# if (($settings{VideoType} eq "mpeg" && $settings{OutputFileName} !~ /^.+\.mpg$/) || ($settings{VideoType} eq "yuv" && $settings{OutputFileName} !~ /^.+\.yuv$/)) -# { -# error(1, "Output = '$settings{OutputFileName}' is invalid!"); -# } -# - if ($settings{DateTimeFormatString} !~ /^(\+((\%.)|.)+)$/) - { - usage(1, "Date Format String = '$settings{DateTimeFormatString}' is invalid!"); - } -} - -if ($settings{VideoWidth} !~ /^(\d+)$/) -{ - error(1, "Width = '$settings{VideoWidth}' is invalid!"); -} - -if ($settings{VideoHeight} !~ /^(\d+)$/) -{ - error(1, "Height = '$settings{VideoHeight}' is invalid!"); -} - -if (!exists $name2std{$settings{VideoStandard}}) -{ - my $validStandards = join(", ", keys(%name2std)); - error(1, "Video Standard = '$settings{VideoStandard}' is invalid!\nValid Standards are: $validStandards"); -} - -if (exists $opts{i} || exists $opts{inputnum}) -{ - if ($settings{InputNum} < 0 || $settings{InputNum} >= scalar(@inputs)) - { - error(1, "Video Input = '$settings{InputNum}' is invalid!\nValid Inputs are from 0 - " . int(scalar(@inputs) - 1)); - } - $settings{InputName} = $inputs[$settings{InputNum}]; -} - -if ((exists $opts{I} || exists $opts{inputname}) && !(exists $opts{i} || exists $opts{inputnum})) -{ - if (!exists $name2input{$settings{InputName}}) - { - my $validInputs = join(", ", @inputs); - error(1, "Video Input Name = '$settings{InputName}' is invalid!\nValid Input Names are: $validInputs"); - } - $settings{InputNum} = $name2input{$settings{InputName}}; -} - -if (!exists $CHANLIST{$settings{FrequencyTable}}) -{ - error(1, "Frequency Table = '$settings{FrequencyTable}' is invalid!"); -} - -# only validate the channel if the input is a tuner. -if ($inputs[$settings{InputNum}] =~ /Tuner/) -{ - if ($settings{TunerNum} !~ /^(\d)$/) - { - error(1, "TunerNum = '$settings{TunerNum}' is invalid!"); - } - if (exists $opts{F} || exists $opts{frequency} || $settings{Frequency}) # the user may have specified a Frequency in their config file - { - if ($settings{Frequency} !~ /^(\d+)$/) - { - error(1, "Frequency = '$settings{Frequency}' is invalid!"); - } - $settings{Channel} = "freq-$settings{Frequency}"; # make sure we output the channel part. - } - # now verify that the channel exists in the frequency table! - else - { - if (!$settings{Channel}) - { - error(1, "channel = '$settings{Channel}' is invalid!"); - } - # first verify the freqency table is appropriate for the standard (NTSC, PAL, SECAM), - # unless they specified the frequency to tune to. - if ($settings{FrequencyTable} !~ /^(custom|$settings{VideoStandard})/i) - { - error(1, "You specified Video Standard '$settings{VideoStandard}' which is incompatible with Frequency Table '$settings{FrequencyTable}'!"); - } - if (!exists $CHANLIST{$settings{FrequencyTable}}->{$settings{Channel}}) - { - error(1, "Channel = '$settings{Channel}' does not exist in Frequency Table '$settings{FrequencyTable}'!"); - } - } - - # get the current channel/frequency value. - my $Frequency; - if(($Frequency = $ivtvObj->getFrequency($tunerFD, $settings{TunerNum})) >= 0) - { - my $freq = ($Frequency * 1000) / 16; - print "freq = $freq\n" if ($settings{Debug}); - # find the associated channel. - if ((!exists $opts{F} && !exists $opts{frequency} && !$settings{Frequency}) && ($curstd eq $settings{VideoStandard}) ) - { - foreach my $chan (keys %{$CHANLIST{$settings{FrequencyTable}}}) - { - if ($CHANLIST{$settings{FrequencyTable}}->{$chan} == $freq) - { - $curChannel = $chan; - } - } - print "curChannel = $curChannel\n" if ($settings{Debug}); - } - else - { - $curFrequency = $freq; - } - } - else - { - die "Error: getFrequency() failed!\n"; - } -} -else -{ - # set the channel = "" so we know to ignore it. - $settings{Channel} = ""; -} - -if ($settings{UsingIvtvDriver}) -{ - # validate the Codec related stuff. - if ($settings{Bitrate} < $settings{minBitrate} || $settings{Bitrate} > $settings{maxBitrate}) - { - error(1, "Bitrate = '$settings{Bitrate}' is invalid!"); - } - if ($settings{PeakBitrate} <= $settings{Bitrate}) - { - error(1, "PeakBitrate can not be less than or equal to Bitrate!"); - } - elsif ($settings{PeakBitrate} < $settings{minPeakBitrate} || $settings{PeakBitrate} > $settings{maxPeakBitrate}) - { - error(1, "PeakBitrate = '$settings{PeakBitrate}' is invalid!"); - } - - if ($settings{VideoStandard} !~ /^(NTSC)/) - { - my $warn = 0; - if ($settings{Framerate} == 0) - { - $settings{Framerate} = 1; - $warn = 1; - } - if ($settings{FramesPerGOP} == 15) - { - $settings{FramesPerGOP} = 12; - $warn = 1; - } - if ($warn) - { - print "Warning: Setting Framerate/FramesPerGOP to PAL settings for Video Standard '$settings{VideoStandard}'!\n\nYou should either specify on the command line or in the ~/.ivtvrc config file.\n"; - } - } - elsif ($settings{VideoStandard} =~ /^(NTSC)/) - { - my $warn = 0; - if ($settings{Framerate} == 1) - { - $settings{Framerate} = 0; - $warn = 1; - } - if ($settings{FramesPerGOP} == 12) - { - $settings{FramesPerGOP} = 15; - $warn = 1; - } - if ($warn) - { - print "Warning: Setting Framerate/FramesPerGOP to NTSC settings for Video Standard '$settings{VideoStandard}'!\n\nYou should either specify on the command line or in the ~/.ivtvrc config file.\n"; - } - } - - if ($settings{SetMSPMatrix} !~ /^(0|1)$/) - { - error(1, "SetMSPMatrix = '$settings{SetMSPMatrix}' is invalid! It can only be 0 or 1."); - } - if ($settings{MSPInput} < 1 || $settings{MSPInput} > 8) - { - error(1, "MSPInput = '$settings{MSPInput}' is invalid! It can only be 1 - 8."); - } - if ($settings{MSPOutput} < 0 || $settings{MSPOutput} > 3) - { - error(1, "MSPOutput = '$settings{MSPOutput}' is invalid! It can only be 0 - 3."); - } -} - -# update the config file if the user wants us to. -if ($settings{UpdateConfigFile}) -{ - my $profile; - if (@profileNames > 1) - { - print "Warning: Not updating config file as you have more than 1 profile specified!\n"; - } - elsif (@profileNames == 1) - { - $profile = $profileNames[0]; - } - else - { - $profile = "defaults"; - } - if ($profile) - { - my $createProfile = (exists $configIni{$profile} ? 0 : 1); - print "Creating Profile = '$profile': $createProfile\n" if ($settings{Debug}); - - if (!$settings{UseConfigFile}) - { - # we have to create the config file and tie to it. - tie %configIni, 'Config::IniFiles', () or die "Error: Initializing config file '$settings{ConfigFileName}' failed! $!\n"; - - # now set the name to work with. - tied(%configIni)->SetFileName($settings{ConfigFileName}) or die "Error: Setting config file to '$settings{ConfigFileName}' failed! $!\n"; - - $configIni{$profile} = {}; # make sure the section exists. - } - - foreach my $arg (keys %mappings) - { - foreach my $option (split(/\|/, $mappings{$arg})) # handle the long/short command option versions - { - if (exists $configIni{$profile}{$arg} || $createProfile || exists $opts{$option}) - { - $configIni{$profile}{$arg} = $settings{$arg}; - print "configIni{$profile}{$arg} = '" . $settings{$arg} . "'\n" if $settings{Debug}; - last; - } - } - } - - # write the config file out. - tied(%configIni)->RewriteConfig or die "Error: Writing config file '$settings{ConfigFileName}' failed! $!\n"; - } -} - -# this hash keeps track of those values I have to set back. -my %changedSettings = ( - resolution => 0, - standard => 0, - VideoType => 0, - InputNum => 0, - Channel => 0, - Frequency => 0, - codec => 0, - ); - -my $directoryName; -if (!$settings{DontRecord}) -{ - # make directory - #$directoryName = formatDirectoryString(); - #$result=`mkdir -p $directoryName`; - $directoryName = $settings{DirectoryFormatString}; -} - -# change the channel -if ($inputs[$settings{InputNum}] =~ /Tuner/) -{ - if (exists $opts{F} || exists $opts{frequency} || $settings{Frequency}) - { - if ($settings{Frequency} != $curFrequency) - { - $changedSettings{Frequency} = 1; - tuneFrequency($settings{Frequency}); - } - } - else - { - if ($curstd ne $settings{VideoStandard}) - { - # we have to set the channel regardless. - # but we want to tune back to the previous frequency. - $changedSettings{Frequency} = 1; - changeChannel($settings{Channel}); - } - elsif ($settings{Channel} ne $curChannel) - { - # otherwise we just changeChannel and restore the previous channel. - $changedSettings{Channel} = 1; - changeChannel($settings{Channel}); - } - } -} - -# set the video standard -if ($settings{VideoStandard} ne $curstd) -{ - $changedSettings{standard} = 1; - change_standard(); - - # see if we have to re-program the msp matrix - if ($settings{UsingIvtvDriver}) - { - if ($settings{SetMSPMatrix}) - { - print "Setting msp matrix: input = $settings{MSPInput}, output = $settings{MSPOutput}\n" if $settings{Debug}; - sleep ($settings{MSPSleep}); # sleep for 2 seconds to let card settle down. - $result = $ivtvObj->mspMatrixSet($tunerFD, $settings{MSPInput}, $settings{MSPOutput}); - if (not defined $result) - { - die "Error calling mspMatrixSet!\n"; - } - if (!$result) - { - die "Error in mspMatrixSet ioctl call!\n"; - } - } - } -} - -# set the input -if ($settings{InputNum} != $curinput || $settings{InputName} ne $curinputName) -{ - $changedSettings{InputNum} = 1; - if (!(exists $opts{i} || exists $opts{inputnum} || exists $opts{I} || exists $opts{inputname})) # our defaults are different than the current values! - { - ## print "Warning: Changing input from $curinputName to $settings{InputName}\n"; - &writelog("tvrecording: Changing input from $curinputName to $settings{InputName}"); - } - change_input(); -} - -# set the capture type - -# store the current width,height so we can restore afterwards -my ($oldWidth, $oldHeight) = $ivtvObj->getResolution($tunerFD); -print "oldWidth = '$oldWidth', oldHeight = '$oldHeight'\n" if ($settings{Debug}); - -if ($settings{VideoWidth} != $oldWidth || $settings{VideoHeight} != $oldHeight) -{ - $changedSettings{resolution} = 1; -} - -# specify the width,height to capture -if ($changedSettings{resolution}) -{ - $result = $ivtvObj->setResolution($tunerFD, $settings{VideoWidth}, $settings{VideoHeight}); - if (not defined $result) - { - die "Error calling setResolution!\n"; - } - if (!$result) - { - die "Error in setResolution ioctl call!\n"; - } -} - -if ($settings{UsingIvtvDriver}) -{ - # specify the codec options to capture mpeg's at. - foreach my $codecName (keys %codecMappings) - { - my $codecIndex = $ivtvObj->{codecIndexes}{$codecMappings{$codecName}}; - if ($codecInfo[$codecIndex] != $settings{$codecName}) - { - $changedSettings{codec} = 1; - $newCodecInfo[$codecIndex] = $settings{$codecName}; - print "new $codecName = '$settings{$codecName}', old $codecName = '$codecInfo[$codecIndex]'\n" if $settings{Debug}; - } - } -} - -if ($changedSettings{codec}) -{ - $result = $ivtvObj->setCodecInfo($tunerFD, @newCodecInfo); - if (!$result) - { - die "Error calling setCodecInfo()!\n"; - } -} - -if (!$settings{DontRecord}) -{ - # capture the video/audio to video.mpg - #print "directoryName:$directoryName, RecordDuration:$settings{RecordDuration},OutputFileName:$settings{OutputFileName}:tuner:$tuner ,OutputMPGFileName:$settings{OutputMPGFileName} \n"; - #directoryName:, RecordDuration:60,OutputFileName:/tv/JOAX-20040615-1411-000.MPG:tuner:GLOB(0x8224838) ,OutputMPGFileName: - captureVideo(directoryName => $directoryName, RecordDuration => $settings{RecordDuration}, - OutputFileName => $settings{OutputFileName}, tuner => $tuner ,OutputMPGFileName => $settings{OutputMPGFileName}); -} - -if ($settings{ResetCardSettings} && !$settings{DontRecord}) -{ - # restore Codec values - if ($changedSettings{codec}) - { - $result = $ivtvObj->setCodecInfo($tunerFD, @codecInfo); - if (!$result) - { - die "Error calling setCodecInfo()!\n"; - } - } - - # restore the previous width,height settings - if ($changedSettings{resolution}) - { - $result = $ivtvObj->setResolution($tunerFD, $oldWidth, $oldHeight); - if (not defined $result) - { - die "Error calling setResolution!\n"; - } - if (!$result) - { - die "Error in setResolution ioctl call!\n"; - } - } - - # restore the previous input setting - if ($changedSettings{InputNum}) - { - # reset back to the old input name - $settings{InputName} = $curinputName; - change_input(); - } - - # restore the previous video standard - if ($changedSettings{standard}) - { - $settings{VideoStandard} = $curstd; - change_standard(); - - # see if we have to re-program the msp matrix - if ($settings{UsingIvtvDriver}) - { - if ($settings{SetMSPMatrix}) - { - print "Setting msp matrix: input = $settings{MSPInput}, output = $settings{MSPOutput}\n" if $settings{Debug}; - sleep ($settings{MSPSleep}); # sleep for 2 seconds to let card settle down. - $result = $ivtvObj->mspMatrixSet($tunerFD, $settings{MSPInput}, $settings{MSPOutput}); - if (not defined $result) - { - die "Error calling mspMatrixSet!\n"; - } - if (!$result) - { - die "Error in mspMatrixSet ioctl call!\n"; - } - } - } - } - - # restore the previous channel - if ($changedSettings{Channel}) - { - changeChannel($curChannel); - } - if ($changedSettings{Frequency}) - { - tuneFrequency($curFrequency); - } -} - -# close the tuner device -close($tuner); - - -exit 0; - -# usage(returnValue, ErrorString) -# returnValue = 1 or 0 -# ErrorString = message you want to tell the user, but only if returnValue = 1. -sub usage -{ - my $errorCode = shift; - my $error = shift; - - print $usageStr; - print "\nError: $error\n" if ($errorCode == 1); - print "$error\n" if ($errorCode == 2); - - exit $errorCode; -} - -# error(returnValue, ErrorString) -# returnValue = 1 or 0 -# ErrorString = message you want to tell the user. -sub error -{ - my $errorCode = shift; - my $error = shift; - - print "$versionStr"; - print "\nError: $error\n"; - - exit $errorCode; -} - -# changes the input to $settings{InputNum} as long as it isn't = $curinput -sub change_input { - my $preinput = $name2input{$settings{InputName}}; - if($preinput != $curinput) - { - $curinput = $preinput; - print "input now $settings{InputName}, #$preinput\n" if ($settings{Debug}); - my $result = $ivtvObj->setInput($tunerFD, $preinput); - if (!$result) - { - die "Error: setInput($preinput) failed!\n"; - } - } -} - -# changes the video standard to $settings{VideoStandard} as long as it isn't = $curstd -sub change_standard { - my $standard = $name2std{$settings{VideoStandard}}; - if($standard != $curStandard) - { - $curStandard = $standard; - print "standard now $settings{VideoStandard}, #$standard\n" if ($settings{Debug}); - my $result = $ivtvObj->setStandard($tunerFD, $standard); - if (!$result) - { - die "Error: setStandard($standard) failed!\n"; - } - } -} - -# changes the channel -# takes the channel to change -sub changeChannel -{ - my $ch = shift; - my $freq = $CHANLIST{$settings{FrequencyTable}}->{$ch}; - my $driverf = ($freq * 16)/1000; - - print "Ch.$ch: $freq $driverf\n" if ($settings{Debug}); - - if (!$ivtvObj->setFrequency($tunerFD, $settings{TunerNum}, $driverf)) - { - die "Error: changeChannel($ch) failed!\n"; - } -} - -# tunes to the specified frequency -# takes the frequency to tune to -sub tuneFrequency -{ - my $freq = shift; - my $driverf = ($freq * 16)/1000; - - print "freq: $freq $driverf\n" if ($settings{Debug}); - - if (!$ivtvObj->setFrequency($tunerFD, $settings{TunerNum}, $driverf)) - { - die "Error: tuneFrequency($freq) failed!\n"; - } -} - -my $done = 0; - -sub catch_alarm { - $done = 1; -} -sub get_next_file_name -{ - - my $file_name = shift(@_); - $file_name =~ m/^(.+?)\-(\d{4})(\d{2})(\d{2})\-(\d{2})(\d{2})\-(\d{3})\.(.+?)$/; - - my $station = $1; - my $year = $2; - my $month = $3; - my $day = $4; - my $hour = $5; - my $min = $6; - my $seq = $7; - my $ext = $8; - $seq++; - my $new_file_name = sprintf("%s-%04d%02d%02d-%02d%02d-%03d.%s", - $station,$year,$month,$day,$hour,$min,$seq,$ext); - return $new_file_name -} - -# does the actual video capturing work. -# takes directoryName, RecordDuration, OutputFileName, tuner -sub captureVideo -{ - my %args = ( @_ ); - my $directoryName = $args{directoryName}; - my $RecordDuration = $args{RecordDuration}; - my $OutputFileName = $args{OutputFileName}; - my $tuner = $args{tuner}; - my $fname = "$directoryName/$OutputFileName"; -# "OutputMPGFileName" => "outputmpgfilename", -# my $OutputFileName = $args{OutputMPGFileName}; - my $OutputFileName = $args{OutputFileName}; -# my $fname = "$directoryName/$OutputFileName"; - my $fname = $args{OutputFileName}; - - - # setup global variables, signal handlers, etc. - - $SIG{ALRM} = \&catch_alarm; - $SIG{INT} = \&catch_alarm; # handle Ctrl-C - - # turn off file buffering. - #$|=1; - - # open the file for writing. - - - - sysopen(OUTPUT, "$fname", O_CREAT | O_WRONLY | O_LARGEFILE) or die "Error creating file '$fname': $!\n"; - - alarm($RecordDuration); - my $buf = ""; - my $len = 0; - while (!$done && read($tuner, $buf, 16384)) - { - $len += length($buf); -# if ($len >= $max_file_size ) -# { -# close(OUTPUT); -# $OutputFileName = get_next_file_name($OutputFileName); -## $fname = "$directoryName/$OutputFileName"; -# $fname = "$OutputFileName"; -# &writelog("tvrecording switch next clip.$fname"); -# sysopen(OUTPUT, "$fname", O_CREAT | O_WRONLY | O_LARGEFILE) -# or die "Error creating file '$fname': $!\n"; -# $len = 0; -# } - - # read from the device and write to the file. - print OUTPUT $buf; - } - - # close the file - close(OUTPUT); - - #$|=0; # turn file buffering back on. -} - -# returns the formatted directory string -sub formatDirectoryString -{ - my $temp = $settings{DirectoryFormatString}; - my $result = $settings{OutputDirectory}; - my %lookupTable = ( - "d" => `/bin/date "$settings{DateTimeFormatString}"`, - "I" => $settings{InputName}, - "c" => $settings{Channel}, - ); - - # fixup the InputName value - $lookupTable{I} =~ s/\s/_/g; - # cleanup the trailing slash on the date - chomp $lookupTable{d}; - - foreach my $option ("d", "I", "c") - { - $temp =~ s/\%$option/$lookupTable{$option}/g; - } - - $result .= "/" . ($temp ? "$temp/" : ""); - - return $result; -} - - - - - + +sub callrecordv4l{ + +#$frequency = `ivtv-tune -d $recdevice -t $frequencyTable -c $ivtvrecch | awk '{print $2}'|tr -d .`; +my $ivtvtuneftype = ''; +if ($frequencyTable eq "ntsc-cable-jp"){ + $ivtvtuneftype = 'japan-cable'; +}else{ + $ivtvtuneftype = 'japan-bcast'; +} +#print "ivtv-tune -d $recdevice -t $ivtvtuneftype -c $ivtvrecch\n"; +&writelog("tvrecording DEBUG ivtv-tune -d $recdevice -t $ivtvtuneftype -c $ivtvrecch"); +&writelog("tvrecording DEBUG $ENV{PATH}"); + +$frequency = `env PATH=PATH=/usr/kerberos/bin:/usr/lib/ccache:/usr/local/bin:/bin:/usr/bin:/home/foltia/bin ivtv-tune -d $recdevice -t $ivtvtuneftype -c $ivtvrecch`; +&writelog("tvrecording DEBUG frequency:$frequency"); +@frequency = split(/\s/,$frequency); +$frequency[1] =~ s/\.//gi; +$frequency = $frequency[1] ; +&writelog("tvrecording DEBUG frequency:$frequency"); + +my $recordv4lcallstring = "$toolpath/perl/record-v4l2.pl --frequency $frequency --duration $reclengthsec --input $recdevice --directory $recfolderpath --inputnum $capturedeviceinputnum --inputname '$capturedeviceinputName' --freqtable $frequencyTable --bitrate $stdbitrate --peakbitrate $peakbitrate --output $outputfilewithoutpath "; + +&writelog("tvrecording $recordv4lcallstring"); +&writelog("tvrecording DEBUG $ENV{HOME}/.ivtvrc"); +$oserr = `env HOME=$toolpath $recordv4lcallstring`; +&writelog("tvrecording DEBUG $oserr"); + +}#end callrecordv4l + Index: trunk/install/perl/addpidatq.pl =================================================================== --- trunk/install/perl/addpidatq.pl (リビジョン 1) +++ trunk/install/perl/addpidatq.pl (リビジョン 83) @@ -47,22 +47,39 @@ if ($titlecount[0] == 1 ){ -$DBQuery = "SELECT bitrate FROM foltia_tvrecord , foltia_subtitle WHERE foltia_tvrecord.tid = foltia_subtitle.tid AND pid='$pid' "; +$DBQuery = "SELECT bitrate,digital FROM foltia_tvrecord , foltia_subtitle WHERE foltia_tvrecord.tid = foltia_subtitle.tid AND pid='$pid' "; $sth = $dbh->prepare($DBQuery); $sth->execute(); @titlecount= $sth->fetchrow_array; $bitrate = $titlecount[0];#ビットレート取得 +if ($titlecount[1] >= 1){ + $usedigital = $titlecount[1];#デジタル優先フラグ +}else{ + $usedigital = 0; +} #PID抽出 $now = &epoch2foldate(`date +%s`); -$DBQuery = "SELECT stationrecch FROM foltia_station,foltia_subtitle WHERE foltia_subtitle.pid = '$pid' AND foltia_subtitle.stationid = foltia_station.stationid "; +#stationIDからrecch +$DBQuery = "SELECT stationrecch,digitalch ,digitalstationband ,foltia_station.stationid FROM foltia_station,foltia_subtitle WHERE foltia_subtitle.pid = '$pid' AND foltia_subtitle.stationid = foltia_station.stationid "; - -#stationIDからrecch $stationh = $dbh->prepare($DBQuery); $stationh->execute(); @stationl = $stationh->fetchrow_array; $recch = $stationl[0]; - +if ($recch eq ""){ + &writelog("addpidatq ERROR recch is NULL:$DBQuery."); + exit 1; +} +if ($stationl[1] => 1){ + $digitalch = $stationl[1]; +}else{ + $digitalch = 0; +} +if ($stationl[2] => 1){ + $digitalstationband = $stationl[2]; +}else{ + $digitalstationband = 0; +} $DBQuery = "SELECT * FROM foltia_subtitle WHERE pid='$pid' "; $sth = $dbh->prepare($DBQuery); @@ -109,11 +126,11 @@ } -Schedule::At::add (TIME => "$atdateparam", COMMAND => "$toolpath/perl/recwrap.pl $recch $reclength $bitrate $tid $countno $pid" , TAG => "$pid"."_R"); - &writelog("addpidatq TIME $atdateparam COMMAND $toolpath/perl/recwrap.pl $recch $reclength $bitrate $tid $countno $pid"); +Schedule::At::add (TIME => "$atdateparam", COMMAND => "$toolpath/perl/recwrap.pl $recch $reclength $bitrate $tid $countno $pid $stationid $usedigital $digitalstationband $digitalch" , TAG => "$pid"."_R"); + &writelog("addpidatq TIME $atdateparam COMMAND $toolpath/perl/recwrap.pl $recch $reclength $bitrate $tid $countno $pid $stationid $usedigital $digitalstationband $digitalch"); }#end #もし新開始時刻が15分移譲先なら再キュー }else{ -&writelog("addpidatq drop:expire $pid $startafter $now $startdatetime"); +&writelog("addpidatq drop:expire $pid $startafter $now $startdatetime"); }#放送が未来の日付なら Index: trunk/install/perl/ipodtranscode.pl =================================================================== --- trunk/install/perl/ipodtranscode.pl (リビジョン 70) +++ trunk/install/perl/ipodtranscode.pl (リビジョン 83) @@ -1,14 +1,10 @@ #!/usr/bin/perl -#usage ipodtranscode.pl /path/to/mpeg2.m2p mp4filenamestring /path/to/mpeg2/tid.localized/mp4/ PID [aspect] +#usage ipodtranscode.pl # # Anime recording system foltia # http://www.dcc-jpl.com/soft/foltia/ # -# # iPod MPEG4/H.264トラコン # ffmpegを呼び出して変換 -# ffmpegはiPodパッチあて版を想定している -# ffmpegの作り方は -# http://www.dcc-jpl.com/diary/ddata2006/02A.html#20060215-00 # # DCC-JPL Japan/foltia project @@ -18,5 +14,4 @@ use DBD::Pg; use Jcode; - $path = $0; @@ -25,19 +20,17 @@ push( @INC, "$path"); } - require "foltialib.pl"; -#引き数がアルか? -$recch = $ARGV[0] ; -if ($recch eq "" ){ - #引き数なしで実行されたら、終了 - print "usage ipodtranscode.pl /path/to/mpeg2.m2p mp4filenamestring /path/to/mpeg2/tid.localized/mp4/ PID [aspect]\n"; - exit; -} - -$inputmpeg2 = $ARGV[0]; -$mp4filenamestring = $ARGV[1]; -$mp4outdir = $ARGV[2]; -$pid = $ARGV[3]; -$aspect = $ARGV[4]; + + +# 二重起動の確認! +$processes = &processfind("ipodtranscode.pl"); +#$processes = $processes + &processfind("ffmpeg"); + +if ($processes > 1 ){ +&writelog("ipodtranscode processes exist. exit:"); +exit; +}else{ +#&writelog("ipodtranscode.pl Normal launch."); +} #DB初期化 @@ -46,5 +39,49 @@ $dbh = DBI->connect($data_source,$DBUser,$DBPass) ||die $DBI::error;; - +# タイトル取得 +#トラコンフラグがたっていてステータス50以上150未満のファイルを古い順にひとつ探す +# 数数える +#$DBQuery = "SELECT count(*) FROM foltia_subtitle, foltia_program, foltia_m2pfiles +#WHERE filestatus >= $FILESTATUSRECEND AND filestatus < $FILESTATUSTRANSCODECOMPLETE AND foltia_program.tid = foltia_subtitle.TID AND foltia_program.PSP = 1 AND foltia_m2pfiles.m2pfilename = foltia_subtitle.m2pfilename "; +#$sth = $dbh->prepare($DBQuery); +#$sth->execute(); +#@titlecount= $sth->fetchrow_array; +&writelog("ipodtranscode starting up."); + +$counttranscodefiles = &counttranscodefiles(); +if ($counttranscodefiles == 0){ + &writelog("ipodtranscode No MPEG2 files to transcode."); + exit; +} +sleep 30; + +while ($counttranscodefiles >= 1){ + +$DBQuery = "SELECT foltia_subtitle.pid,foltia_subtitle.tid,foltia_subtitle.m2pfilename,filestatus,foltia_program.aspect ,foltia_subtitle.countno +FROM foltia_subtitle, foltia_program, foltia_m2pfiles +WHERE filestatus >= $FILESTATUSRECEND AND filestatus < $FILESTATUSTRANSCODECOMPLETE AND foltia_program.tid = foltia_subtitle.TID AND foltia_program.PSP = 1 AND foltia_m2pfiles.m2pfilename = foltia_subtitle.m2pfilename +ORDER BY enddatetime ASC +LIMIT 1 "; + +$sth = $dbh->prepare($DBQuery); +$sth->execute(); +@dbparam = $sth->fetchrow_array; +#print "$dbparam[0],$dbparam[1],$dbparam[2],$dbparam[3],$dbparam[4],$dbparam[5]\n"; +&writelog("ipodtranscode DEBUG $DBQuery"); +&writelog("ipodtranscode DEBUG $dbparam[0],$dbparam[1],$dbparam[2],$dbparam[3],$dbparam[4],$dbparam[5]"); +$pid = $dbparam[0]; +$tid = $dbparam[1]; +$inputmpeg2 = $recfolderpath."/".$dbparam[2]; # path付き +$mpeg2filename = $dbparam[2]; # pathなし +$filestatus = $dbparam[3]; +$aspect = $dbparam[4];# 16,1 (超額縁),4,3 +$countno = $dbparam[5]; +$mp4filenamestring = &mp4filenamestringbuild($pid); + +&writelog("ipodtranscode DEBUG mp4filenamestring $mp4filenamestring"); +#展開ディレクトリ作成 +$pspdirname = &makemp4dir($tid); +$mp4outdir = $pspdirname ; +# 実際のトラコン # タイトル取得 if ($pid ne ""){ @@ -82,38 +119,226 @@ } -# アスペクト比 -if ($aspect == 16){ -$cropopt = " -croptop 70 -cropbottom 60 -cropleft 8 -cropright 14 -aspect 1.7777 "; -}else{ -$cropopt = " -croptop 8 -cropbottom 8 -cropleft 8 -cropright 14 "; -} + +if ($filestatus <= $FILESTATUSRECEND){ +} + +if ($filestatus <= $FILESTATUSWAITINGCAPTURE){ +#なにもしない +} + +if ($filestatus <= $FILESTATUSCAPTURE){ +#unlink +# Starlight breaker向けキャプチャ画像作成 +if (-e "$toolpath/perl/captureimagemaker.pl"){ + &writelog("ipodtranscode Call captureimagemaker $mpeg2filename"); +&changefilestatus($pid,$FILESTATUSCAPTURE); + system ("$toolpath/perl/captureimagemaker.pl $mpeg2filename"); +&changefilestatus($pid,$FILESTATUSCAPEND); +} +} + +if ($filestatus <= $FILESTATUSCAPEND){ +# サムネイル作る +&makethumbnail(); +&changefilestatus($pid,$FILESTATUSTHMCREATE); +} + +if ($filestatus <= $FILESTATUSWAITINGTRANSCODE){ +} + +$filenamebody = $inputmpeg2 ; +$filenamebody =~ s/.m2t$|.ts$|.m2p$|.mpg$//gi; +#デジタルかアナログか +if ($inputmpeg2 =~ /m2t$|ts$/i){ + #print "MPEG2-TS\n"; + + +if ($filestatus <= $FILESTATUSTRANSCODETSSPLITTING){ + unlink("${filenamebody}_tss.m2t"); + unlink("${filenamebody}_HD.m2t"); +} +if ($filestatus <= $FILESTATUSTRANSCODEFFMPEG){ + + # H.264出力 + $trcnmpegfile = $inputmpeg2 ; + # アスペクト比 + if ($aspect == 1){#超額縁 + $cropopt = " -croptop 150 -cropbottom 150 -cropleft 200 -cropright 200 "; + }elsif($aspect == 4){#SD + $cropopt = " -croptop 6 -cropbottom 6 -cropleft 8 -cropright 8 "; + }else{#16:9 + $cropopt = " -croptop 6 -cropbottom 6 -cropleft 8 -cropright 8 "; + } + # クオリティごとに + if (($trconqty eq "")||($trconqty == 1)){ + $ffmpegencopt = " -s 360x202 -deinterlace -r 24.00 -vcodec libx264 -g 300 -b 330000 -level 13 -loop 1 -sc_threshold 60 -partp4x4 1 -rc_eq 'blurCplx^(1-qComp)' -refs 3 -maxrate 700000 -async 50 -f h264 $filenamebody.264"; + }elsif($trconqty == 2){ + $ffmpegencopt = " -s 480x272 -deinterlace -r 29.97 -vcodec libx264 -g 300 -b 400000 -level 13 -loop 1 -sc_threshold 60 -partp4x4 1 -rc_eq 'blurCplx^(1-qComp)' -refs 3 -maxrate 700000 -async 50 -f h264 $filenamebody.264"; + }elsif($trconqty == 3){#640x352 + $ffmpegencopt = " -s 640x352 -deinterlace -r 29.97 -vcodec libx264 -g 100 -b 600000 -level 13 -loop 1 -sc_threshold 60 -partp4x4 1 -rc_eq 'blurCplx^(1-qComp)' -refs 3 -maxrate 700000 -async 50 -f h264 $filenamebody.264"; + } + &changefilestatus($pid,$FILESTATUSTRANSCODEFFMPEG); + &writelog("ipodtranscode ffmpeg $filenamebody.264"); + system ("ffmpeg -y -i $trcnmpegfile $cropopt $ffmpegencopt"); + + #もしエラーになったらTsSplitする + if (! -e "$filenamebody.264"){ + &changefilestatus($pid,$FILESTATUSTRANSCODETSSPLITTING); + unlink("${filenamebody}_tss.m2t"); + unlink("${filenamebody}_HD.m2t"); + if (-e "$toolpath/perl/tool/tss.py"){ + &writelog("ipodtranscode tss $inputmpeg2"); + system("$toolpath/perl/tool/tss.py $inputmpeg2"); + + }else{ + # TsSplit + &writelog("ipodtranscode TsSplitter $inputmpeg2"); + system("wine $toolpath/perl/tool/TsSplitter.exe -EIT -ECM -EMM -SD -1SEG -WAIT2 $inputmpeg2"); + } + if(-e "${filenamebody}_tss.m2t"){ + $trcnmpegfile = "${filenamebody}_tss.m2t"; + }elsif (-e "${filenamebody}_HD.m2t"){ + $trcnmpegfile = "${filenamebody}_HD.m2t"; + }else{ + &writelog("ipodtranscode ERR NOT Exist ${filenamebody}_HD.m2t"); + $trcnmpegfile = inputmpeg2 ; + } + #再ffmpeg + &changefilestatus($pid,$FILESTATUSTRANSCODEFFMPEG); + &writelog("ipodtranscode ffmpeg retry $filenamebody.264"); + system ("ffmpeg -y -i $trcnmpegfile $cropopt $ffmpegencopt"); + } + #もしエラーになったらcropやめる + if (! -e "$filenamebody.264"){ + #再ffmpeg + &changefilestatus($pid,$FILESTATUSTRANSCODEFFMPEG); + &writelog("ipodtranscode ffmpeg retry no crop $filenamebody.264"); + system ("ffmpeg -y -i $trcnmpegfile $ffmpegencopt"); + } +} +if ($filestatus <= $FILESTATUSTRANSCODEWAVE){ + # WAVE出力 + unlink("${filenamebody}.wav"); + &changefilestatus($pid,$FILESTATUSTRANSCODEWAVE); + &writelog("ipodtranscode mplayer $filenamebody.wav"); + system ("mplayer $trcnmpegfile -vc null -vo null -ao pcm:file=$filenamebody.wav:fast"); + +} +if ($filestatus <= $FILESTATUSTRANSCODEAAC){ + # AAC変換 + unlink("${filenamebody}.aac"); + &changefilestatus($pid,$FILESTATUSTRANSCODEAAC); + if (-e "$toolpath/perl/tool/neroAacEnc"){ + if (-e "$filenamebody.wav"){ + &writelog("ipodtranscode neroAacEnc $filenamebody.wav"); + system ("$toolpath/perl/tool/neroAacEnc -br 128000 -if $filenamebody.wav -of $filenamebody.aac"); + }else{ + &writelog("ipodtranscode ERR Not Found $filenamebody.wav"); + } + }else{ + #print "DEBUG $toolpath/perl/tool/neroAacEnc\n\n"; + &writelog("ipodtranscode faac $filenamebody.wav"); + system ("faac -b 128 -o $filenamebody.aac $filenamebody.wav "); + } + +} +if ($filestatus <= $FILESTATUSTRANSCODEMP4BOX){ + # MP4ビルド + unlink("${filenamebody}.base.mp4"); + &changefilestatus($pid,$FILESTATUSTRANSCODEMP4BOX); + &writelog("ipodtranscode MP4Box $filenamebody"); + system ("cd $recfolderpath ; MP4Box -fps 29.97 -add $filenamebody.264 -new $filenamebody.base.mp4"); +#$exit_value = $? >> 8; +#$signal_num = $? & 127; +#$dumped_core = $? & 128; +#&writelog("ipodtranscode DEBUG MP4Box -fps 29.97 -add:$exit_value:$signal_num:$dumped_core"); + + if (-e "$filenamebody.base.mp4"){ + system ("cd $recfolderpath ; MP4Box -add $filenamebody.aac $filenamebody.base.mp4"); +#$exit_value = $? >> 8; +#$signal_num = $? & 127; +#$dumped_core = $? & 128; +#&writelog("ipodtranscode DEBUG MP4Box -add $filenamebody.aac:$exit_value:$signal_num:$dumped_core"); + }else{ + &writelog("ipodtranscode ERR File not exist.$filenamebody.base.mp4"); + } + +} + +if ($filestatus <= $FILESTATUSTRANSCODEATOM){ + unlink("${mp4outdir}MAQ${mp4filenamestring}.MP4"); + # iPodヘッダ付加 + &changefilestatus($pid,$FILESTATUSTRANSCODEATOM); + &writelog("ipodtranscode ATOM $filenamebody"); + #system ("/usr/local/bin/ffmpeg -y -i $filenamebody.base.mp4 -vcodec copy -acodec copy -f ipod ${mp4outdir}MAQ${mp4filenamestring}.MP4"); + system ("cd $recfolderpath ; MP4Box -ipod $filenamebody.base.mp4"); +$exit_value = $? >> 8; +$signal_num = $? & 127; +$dumped_core = $? & 128; +&writelog("ipodtranscode DEBUG MP4Box -ipod:$exit_value:$signal_num:$dumped_core"); + system("mv $filenamebody.base.mp4 ${mp4outdir}MAQ${mp4filenamestring}.MP4"); + &writelog("ipodtranscode mv $filenamebody.base.mp4 ${mp4outdir}MAQ${mp4filenamestring}.MP4"); +# ipodtranscode mv /home/foltia/php/tv/1329-21-20080829-0017.base.mp4 /home/foltia/php/tv/1329.localized/mp4/MAQ-/home/foltia/php/tv/1329-21-20080829-0017.MP4 + +} +if ($filestatus <= $FILESTATUSTRANSCODECOMPLETE){ + # 中間ファイル消す + &changefilestatus($pid,$FILESTATUSTRANSCODECOMPLETE); + unlink("${filenamebody}_HD.m2t"); + unlink("${filenamebody}_tss.m2t"); + unlink("$filenamebody.264"); + unlink("$filenamebody.wav"); + unlink("$filenamebody.aac"); + unlink("$filenamebody.base.mp4"); + + &updatemp4file(); + +} + +}else{ #デジタルかアナログか + #print "MPEG2\n"; + # アスペクト比 + if ($aspect == 16){ + $cropopt = " -croptop 70 -cropbottom 60 -cropleft 8 -cropright 14 -aspect 16:9 "; + }else{ + $cropopt = " -croptop 8 -cropbottom 8 -cropleft 8 -cropright 14 "; + } # クオリティごとに -if (($trconqty eq "")||($trconqty == 1)){#sample:src 106.6sec encode 82sec x0.77 382kbps @Celeron2.6GHz - -$encodeoption = "-y -i $inputmpeg2 -vcodec xvid $cropopt -s 320x240 -b 300 -bt 128 -r 14.985 -bufsize 192 -maxrate 512 -minrate 0 -deinterlace -acodec aac -ab 128 -ar 24000 -ac 2 $movietitle ${mp4outdir}M4V${mp4filenamestring}.MP4"; +if (($trconqty eq "")||($trconqty == 1)){ +#$encodeoption = "-y -i $inputmpeg2 -vcodec xvid $cropopt -s 320x240 -b 300 -bt 128 -r 14.985 -bufsize 192 -maxrate 512 -minrate 0 -deinterlace -acodec aac -ab 128 -ar 24000 -ac 2 $movietitle ${mp4outdir}M4V${mp4filenamestring}.MP4"; $mp4file = "${mp4outdir}M4V${mp4filenamestring}.MP4"; - -}elsif($trconqty == 2){ #sample:src 106.6sec encode 117sec x1.1 597kbps @Celeron2.6GHz - -$encodeoption = "-y -i $inputmpeg2 -target ipod -profile 51 -level 30 $cropopt -s 320x240 -b 300 -r 24 -acodec aac -ar 32000 -ac 2 $movietitle ${mp4outdir}MAQ${mp4filenamestring}.MP4"; +$encodeoption = "-y -i $inputmpeg2 vcodec libxvid $cropopt -s 320x240 -b 300 -bt 128 -r 14.985 -deinterlace -acodec libfaac -f ipod ${mp4outdir}M4V${mp4filenamestring}.MP4"; +#time ffmpeg -y -i /home/foltia/php/tv/trcntest/nanoha-As-op.mpg -vcodec libxvid -croptop 8 -cropbottom 8 -cropleft 8 -cropright 14 -s 320x240 -b 300 -bt 128 -r 14.985 -deinterlace -acodec libfaac -f ipod M4V-Nanoha-As-OP.MP4 +# 32sec +# 2.1MB +}elsif($trconqty == 2){ +#$encodeoption = "-y -i $inputmpeg2 -target ipod -profile 51 -level 30 $cropopt -s 320x240 -b 300 -r 24 -acodec aac -ar 32000 -ac 2 $movietitle ${mp4outdir}MAQ${mp4filenamestring}.MP4"; $mp4file = "${mp4outdir}MAQ${mp4filenamestring}.MP4"; - -}elsif($trconqty == 3){ #sample:src 106.6sec encode 364sec x3.4 528kbps @Celeron2.6GHz - -$encodeoption = "-y -i $inputmpeg2 -target ipod -profile 51 -level 30 $cropopt -acodec aac -ab 96 -vcodec h264 -maxrate 700 -minrate 0 -deinterlace -b 300 -ar 32000 -mbd 2 -coder 1 -cmp 2 -subcmp 2 -s 320x240 -r 30000/1001 -flags loop -trellis 2 -partitions parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 $movietitle ${mp4outdir}MAQ${mp4filenamestring}.MP4"; +$encodeoption = "-y -i $inputmpeg2 -vcodec libx264 -croptop 8 $cropopt -s 320x240 -b 300 -bt 128 -r 24 -deinterlace -acodec libfaac -f ipod ${mp4outdir}MAQ${mp4filenamestring}.MP4"; +#time ffmpeg -y -i /home/foltia/php/tv/trcntest/nanoha-As-op.mpg -vcodec libx264 -croptop 8 -cropbottom 8 -cropleft 8 -cropright 14 -s 320x240 -b 300 -bt 128 -r 24 -deinterlace -acodec libfaac -f ipod MAQ-Nanoha-As-OP.MP4 +# 2min22sec +# 6.4MB +}elsif($trconqty == 3){ +#$encodeoption = "-y -i $inputmpeg2 -target ipod -profile 51 -level 30 $cropopt -acodec aac -ab 96 -vcodec h264 -maxrate 700 -minrate 0 -deinterlace -b 300 -ar 32000 -mbd 2 -coder 1 -cmp 2 -subcmp 2 -s 320x240 -r 30000/1001 -flags loop -trellis 2 -partitions parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 $movietitle ${mp4outdir}MAQ${mp4filenamestring}.MP4"; $mp4file = "${mp4outdir}MAQ${mp4filenamestring}.MP4"; - -}elsif($trconqty == 4){ #sample:src 106.6sec encode 239sec x2.24 1036kbps @Celeron2.6GHz - -$encodeoption = "-y -i $inputmpeg2 -target ipod -profile 51 -level 30 $cropopt -s 480x360 -b 400 -r 24 -acodec aac -ar 32000 -ac 2 $movietitle ${mp4outdir}MAQ${mp4filenamestring}.MP4"; +$encodeoption = "-y -i $inputmpeg2 -vcodec libx264 $cropopt -s 320x240 -b 380 -bt 128 -r 29.97 -deinterlace -acodec libfaac -f ipod ${mp4outdir}MAQ${mp4filenamestring}.MP4"; +#time ffmpeg -y -i /home/foltia/php/tv/trcntest/nanoha-As-op.mpg -vcodec libx264 -croptop 8 -cropbottom 8 -cropleft 8 -cropright 14 -s 320x240 -b 380 -bt 128 -r 29.97 -deinterlace -acodec libfaac -f ipod MAQ-Nanoha-As-OP.MP4 +# 2m53.912s +# 7MB +}elsif($trconqty == 4){ +#$encodeoption = "-y -i $inputmpeg2 -target ipod -profile 51 -level 30 $cropopt -s 480x360 -b 400 -r 24 -acodec aac -ar 32000 -ac 2 $movietitle ${mp4outdir}MAQ${mp4filenamestring}.MP4"; $mp4file = "${mp4outdir}MAQ${mp4filenamestring}.MP4"; - -}elsif($trconqty == 5){ #sample:src 106.6sec encode 1012sec x9.49 727kbps @Celeron2.6GHz - -$encodeoption = "-y -i $inputmpeg2 -target ipod -profile 51 -level 30 $cropopt -acodec aac -ab 96 -vcodec h264 -maxrate 700 -minrate 0 -deinterlace -b 400 -ar 32000 -mbd 2 -coder 1 -cmp 2 -subcmp 2 -s 480x360 -r 30000/1001 -flags loop -trellis 2 -partitions parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 $movietitle ${mp4outdir}MAQ${mp4filenamestring}.MP4"; +$encodeoption = "-y -i $inputmpeg2 -vcodec libx264 $cropopt -s 640x480 -b 500 -maxrate 700 -bt 128 -r 29.97 -deinterlace -acodec libfaac -f ipod ${mp4outdir}MAQ${mp4filenamestring}.MP4"; +#time ffmpeg -y -i /home/foltia/php/tv/trcntest/nanoha-As-op.mpg -vcodec libx264 -croptop 8 -cropbottom 8 -cropleft 8 -cropright 14 -s 640x480 -b 500 -maxrate 700 -bt 128 -r 29.97 -deinterlace -acodec libfaac -f ipod MAQ-Nanoha-As-OP.MP4 +# 11m0.294s +# 20MB +}elsif($trconqty == 5){ +#$encodeoption = "-y -i $inputmpeg2 -target ipod -profile 51 -level 30 $cropopt -acodec aac -ab 96 -vcodec h264 -maxrate 700 -minrate 0 -deinterlace -b 400 -ar 32000 -mbd 2 -coder 1 -cmp 2 -subcmp 2 -s 480x360 -r 30000/1001 -flags loop -trellis 2 -partitions parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 $movietitle ${mp4outdir}MAQ${mp4filenamestring}.MP4"; $mp4file = "${mp4outdir}MAQ${mp4filenamestring}.MP4"; -} - - +$encodeoption = "-y -i $inputmpeg2 -vcodec libx264 -croptop 8 $cropopt -s 640x480 -b 500 -maxrate 700 -bt 128 -r 29.97 -deinterlace -flags loop -trellis 2 -partitions parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 -acodec libfaac -f ipod ${mp4outdir}MAQ${mp4filenamestring}.MP4"; +#time ffmpeg -y -i /home/foltia/php/tv/trcntest/nanoha-As-op.mpg -vcodec libx264 -croptop 8 -cropbottom 8 -cropleft 8 -cropright 14 -s 640x480 -b 500 -maxrate 700 -bt 128 -r 29.97 -deinterlace -flags loop -trellis 2 -partitions parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 -acodec libfaac -f ipod MAQ-Nanoha-As-OP.MP4 +# 14m14.033s +# 18MB +} $encodeoptionlog = $encodeoption; @@ -122,9 +347,92 @@ &writelog("ipodtranscode START QTY=$trconqty $encodeoptionlog"); #print "ffmpeg $encodeoptionlog \n"; -system ("/usr/local/bin/ffmpeg $encodeoption "); +&changefilestatus($pid,$FILESTATUSTRANSCODEFFMPEG); +system ("ffmpeg $encodeoption "); &writelog("ipodtranscode FFEND $inputmpeg2"); - -&writelog("ipodtranscode mp4psp -p $mp4file $movietitleeuc"); -system("/usr/local/bin/mp4psp -p $mp4file '$movietitleeuc' "); -&writelog("ipodtranscode mp4psp COMPLETE $mp4file "); - +&changefilestatus($pid,$FILESTATUSTRANSCODECOMPLETE); +#もう要らなくなった #2008/11/14 +#&writelog("ipodtranscode mp4psp -p $mp4file $movietitleeuc"); +#system("/usr/local/bin/mp4psp -p $mp4file '$movietitleeuc' "); +#&writelog("ipodtranscode mp4psp COMPLETE $mp4file "); + +&updatemp4file(); +}#endif #デジタルかアナログか + +$counttranscodefiles = &counttranscodefiles(); +############################ +#一回で終らせるように +#exit; +}# end while +#残りファイルがゼロなら +&writelog("ipodtranscode ALL COMPLETE"); +exit; + +#----------------------------------------------------------------------- +sub mp4filenamestringbuild(){ +#ファイル名決定 +#1329-19-20080814-2337.m2t +my @mpegfilename = split(/\./,$dbparam[2]) ; +my $pspfilname = "-".$mpegfilename[0] ; +return("$pspfilname"); +}#end sub mp4filenamestringbuild + + +sub makethumbnail(){ +#サムネール +my $outputfilename = $inputmpeg2 ;#フルパス +my $thmfilename = "MAQ${mp4filenamestring}.THM"; +&writelog("ipodtranscode DEBUG thmfilename $thmfilename"); + +system ("mplayer -ss 00:01:20 -vo jpeg:outdir=$pspdirname -ao null -sstep 1 -frames 3 -v 3 $outputfilename"); + +&writelog("ipodtranscode DEBUG mplayer -ss 00:01:20 -vo jpeg:outdir=$pspdirname -ao null -sstep 1 -frames 3 -v 3 $outputfilename"); + +if (-e "$pspdirname/$thmfilename"){ +$timestamp =`date "+%Y%m%d-%H%M%S"`; +chomp $timestamp; + system("convert -crop 160x120+1+3 -resize 165x126\! $pspdirname/00000002.jpg $pspdirname/$thmfilename".$timestamp.".THM"); +}else{ + system("convert -crop 160x120+1+3 -resize 165x126\! $pspdirname/00000002.jpg $pspdirname/$thmfilename"); +} +&writelog("ipodtranscode DEBUG convert -crop 160x120+1+3 -resize 165x126\! $pspdirname/00000002.jpg $pspdirname/$thmfilename"); + +system("rm -rf $pspdirname/0000000*.jpg "); +&writelog("ipodtranscode DEBUG rm -rf $pspdirname/0000000*.jpg"); + +}#endsub makethumbnail + +sub updatemp4file(){ +my $mp4filename = "MAQ${mp4filenamestring}.MP4"; + +if (-e "${mp4outdir}MAQ${mp4filenamestring}.MP4"){ +# MP4ファイル名をPIDレコードに書き込み + $DBQuery = "UPDATE foltia_subtitle SET PSPfilename = '$mp4filename' WHERE pid = '$pid' "; + $sth = $dbh->prepare($DBQuery); + $sth->execute(); +&writelog("ipodtranscode UPDATEsubtitleDB $DBQuery"); + +# MP4ファイル名をfoltia_mp4files挿入 + $DBQuery = "insert into foltia_mp4files values ('$tid','$mp4filename') "; + $sth = $dbh->prepare($DBQuery); + $sth->execute(); +&writelog("ipodtranscode UPDATEmp4DB $DBQuery"); + +&changefilestatus($pid,$FILESTATUSALLCOMPLETE); +}else{ +&writelog("ipodtranscode ERR MP4 NOT EXIST $pid/$mp4filename"); +} + + +}#updatemp4file + +sub counttranscodefiles(){ +my $DBQuery = "SELECT count(*) FROM foltia_subtitle, foltia_program, foltia_m2pfiles +WHERE filestatus >= $FILESTATUSRECEND AND filestatus < $FILESTATUSTRANSCODECOMPLETE AND foltia_program.tid = foltia_subtitle.TID AND foltia_program.PSP = 1 AND foltia_m2pfiles.m2pfilename = foltia_subtitle.m2pfilename "; +$sth = $dbh->prepare($DBQuery); +$sth->execute(); +my @titlecount= $sth->fetchrow_array; + +return ($titlecount[0]); + + +} Index: trunk/install/perl/deletemovie.pl =================================================================== --- trunk/install/perl/deletemovie.pl (リビジョン 1) +++ trunk/install/perl/deletemovie.pl (リビジョン 83) @@ -32,5 +32,5 @@ #ファイル名正当性チェック -if ($fname =~ /.m2p\z/){ +if ($fname =~ /.m2p$|.m2t$/){ }else{ Index: trunk/install/perl/record-v4l2.pl =================================================================== --- trunk/install/perl/record-v4l2.pl (リビジョン 83) +++ trunk/install/perl/record-v4l2.pl (リビジョン 83) @@ -0,0 +1,1617 @@ +#!/usr/bin/perl +# record-v4l2.pl created by James A. Pattie 04/10/2003 +# Copyright 2003-2004 +# Purpose: to record from the specified channel for the specified amount +# of time to the video OutputDirectory under the channel-start time name as video.mpg. + +# +# You can always get the latest version of this script at +# http://www.pcxperience.org/ +# + +# 20071016 Patched by DCC-JPL Japan / foltia project / http://www.dcc-jpl.com/soft/foltia/ + +# 20030425 - 1.4 - Added devfs support based upon patch submitted by +# Jonathan Kolb +# 20030426 - 1.5 - Imported the ptune.pl functionality +# 20030426 - 1.6 - moved -F -> -L, -F now lets you specify the frequency to tune to. +# 20030427 - 1.7 - renamed to record_ivtv.pl per Kevin's request. Added -R option. +# 20030430 - 1.8 - fixing some comparisons that needed to be strings, etc. +# 20030504 - 1.9 - Migrating to Video::ivtv for video resolution support. +# 20030505 - 1.10- Replaced open w/ sysopen but it doesn't make a difference. +# Starting to replace the Standard code w/ Video::ivtv methods. +# Added the version numbers that I require to the use statements. +# 20030507 - 1.11- Migrated to using get/setFrequency from Video::ivtv 0.03. +# 20030510 - 1.12- Migrated to using get/setInput from Video::ivtv 0.04. Moved to using +# the exported method names rather than Video::ivtv::method(). +# Converted to using enumerateStandard(). +# Fixed the condition where switching Video Standards will most likely +# not get the correct channel and so would switch back with channel = 0 +# which is invalid. In this case I store the previous frequency, do the +# channel change but signal to restore the previous frequency on cleanup. +# Converted to using enumerateInput(). +# 20030512 - 1.13- Added initial support for setting the bitrate/bitrate_peak values. +# 20030513 - 1.14- Tweaked the bitrate values to be closer to real DVD bitrates. +# Added support for the .ivtvrc config file and User Profiles. +# 20030516 - 1.15- Updated to the OO interface that Video::ivtv 0.06 now requires. +# Cleaned up a lot of the global variables into a settings hash. +# Made the -S command add any config items you specified on the command line +# that were not in the Profile being updated. This way you can add new items. +# Made the config file work from a mapping hash so that we can easily add/remove +# config items in the future. +# 20030518 - 1.16- Fixed a Frequency bug that happened when changing Video Standards and the +# Frequency came from a user specified Profile. +# 20030519 - 1.17- Adding the rest of the Codec related options to the config file / defaults. +# Switched to using Getopt::Long. You can specify all config file options at +# least by a --long version and still by the original -X command option. +# Cleaned up the option parsing code to take advantage of the mappings hash. +# 20030520 - 1.18- Fixing the handling of the Profile command line option. +# 20030524 - 1.19- Cleaned up the output for -L/--list-freqtable. Changed --list -> --list-freqtable. +# Added support to detect the v4l2 driver in use and disable the ivtv "enhancements" +# if driver != "ivtv". +# Renamed to record-v4l2.pl to reflect the ability of this program to record from any +# v4l2 device but with special support for the ivtv driver. +# 20030524 - 1.20- Improving the Ctrl-C handling (cleanup before dying). It may take a second or two +# before the program exits, but it should exit after resetting anything it changed, unless +# you had specified not to reset the card. +# Allow layering of profiles by calling -P/--profile multiple times. Each profile will +# be layered over the last. You will not be able to create/update a profile if you +# specify more than one though. +# Fixed a bug that would cause a parameter from the profile to be set n times, where n was +# the number of characters in the mapping string that consisted of the single letter | and +# the long command option name. Ex: Channel has 'c|channel' so the Channel value was being +# set 9 times instead of just the first time if it was in the profile. +# 20030525 - 1.21- Fixed devfsd detection code as it was overriding what came from the config file. +# Adding --no-record option so that we can start to implement the replacement functionality for +# ptune.pl (ie. Set all values and then exit, do not reset the card and do not capture) +# 20030607 - 1.22- Adding --directory-format and --date-format options so that the user can specify the +# naming convention to use when specifying the directory the output file should be put in. +# Tweaked some of the defaults. +# Create the config file if it doesn't exist, regardless of the --save flag being specified. +# Added method error() to output an error condition that doesn't warrant the whole usage and +# converted all relevant usage() calls to error() calls. +# Added option --debug to dynamically on the fly enable debug output. +# 20030609 - 1.23- Added option --list-channels to display the currently selected frequency tables contents. +# Changed the default output directory to '.'. +# Moved $debug -> $settings{Debug} so it can be stored in the config file. This allows you to +# turn debugging on for only certain profiles, etc. +# Restructured some of the validity tests to only happen as long as we are recording since they +# do not need to be validated when we are not recording. Mainly to do with the output stuff. +# 20030610 - 1.24- Moved the tunerNum variable into the config file: TunerNum +# Added --tuner-num option to dynamically set it. +# 20030614 - 1.25- I now require Video::ivtv 0.09 to make sure everyone is using the version that fixes the known +# reported segfault issues. +# Added freqtable "custom" support so that people using the new feature in ptune-ui.pl and have +# set their default frequency table to be "custom" will just work when they specify channel X, etc. +# I'm now sorting the command line input since otherwise I can't guarantee the order options get +# processed in, but even that is wrong. I need to use Tie::IxHash, but that isn't standard. +# 20030626 - 1.26- Updated to cover the audio -> audio_bitmask changes that Video::ivtv 0.11 implemented to cover +# the ivtv_ioctl_codec structure changes. +# Implemented config file versioning so that I know when the Audio entry needs to be updated in case it +# comes back in a future version of the ivtv_ioctl_codec structure. +# 20030628 - 1.27- Adding --list-inputs and --list-standards to display the available inputs and video standards. +# 20030713 - 1.28- Added code to make sure the codec properties are proper when switching standard to PAL/SECAM. +# Added config options SetMSPMatrix, MSPInput, MSPOutput, MSPSleep to allow the user to specify if they +# want the msp matrix updated any time the Video Standard is changed and to specify what they want programmed. +# Bumping the config file version to 2 to account for the new options. +# 20030715 - 1.29- Adding the missing msp matrix reset code in the reset section. +# Adding codec checks to make sure that they are right for NTSC. +# Made it legal to specify the channel by itself without -c/--channel. +# 20030822 - 1.30- Adding the missing codec value BitrateMode +# 20030927 - 1.31- Adding support to export the settings used as a shell or perl snippet for inclusion +# by scripts working with the recorded video files. +# Changing the default value of StreamType to 14 since that is near DVD quality. +# 20040306 - 1.32- Creating the parent directory if it doesn't exist. +# Making sure to update the InputName if the config specified a number so that input switching works 100%. +# Command line arguments now take precedence over Profile values, should have been this way always. :( +# 20040613 - 1.33- Removing the MSPMatrix related options and code. +# Adding a check for the 0.1.10 driver and not using the GOP_END ioctl if it is not that version. +# Brought it upto speed in regards to the 0.2.00rc1g driver - all known issues are now fixed. +# Added code to determine the version of the ivtv driver being used (0.1.10, 0.2.0, etc.) and +# output it in the video.settings file so we know what driver the capture was done with. + + +use strict; +use Getopt::Long qw(:config no_ignore_case bundling); +use Fcntl; +use Video::Frequencies 0.03; +use Video::ivtv 0.13; +use Config::IniFiles; + +my $version="1.33"; +my $cfgVersion = "3"; +my $cfgVersionStr = "_configVersion_"; # hopefully unique [defaults] value to let me know what version the config file is. +my $ivtvVersion = 0; # used to store the detected version of the driver. Needed for the CaptureLastGOP feature. + +my @capabilities = (); # The cards capabilities + +my %settings = ( + Channel => 4, # default to the ivtv default channel + RecordDuration => 3595, # default to 59 minutes 55 seconds (in seconds) - This lets 2 back to back cron jobs work! + InputNum => 0, # TV-Tuner 1 + InputName => "Tuner 1", + OutputDirectory => ".", + VideoDevice => "/dev/video0", + VideoWidth => "720", # 720x480-fullscreen NTSC + VideoHeight => "480", + VideoStandard => "NTSC-M", # L135 v060406.pl MMM "NTSC", # NTSC, PAL or SECAM + VideoType => "mpeg", # mpeg, yuv + BitrateMode => 0, # 0 = VBR, 1 = CBR + Bitrate => "6500000", + PeakBitrate => "8000000", # peak bitrate + Aspect => 2, + AudioBitmask => 0x00e9, + BFrames => 3, + DNRMode => 0, + DNRSpatial => 0, + DNRTemporal => 0, + DNRType => 0, + Framerate => 0, + FramesPerGOP => 15, + GOPClosure => 1, + Pulldown => 0, + StreamType => 14, # 0 = PS, 1 = TS, 2 = MPEG1, 3 = PES_AV, 5 = PES_V, 7 = PES_A, 10 = DVD, 11 = VCD, 12 = SVCD, 13 = DVD-Special 1, 14 = DVD-Special 2 + OutputFileName => "video.mpg", + FrequencyTable => "ntsc-cable", # default to NTSC_CABLE mapping. + Frequency => "", # user specified frequency. + ResetCardSettings => 1, + ConfigFileName => "$ENV{HOME}/.ivtvrc", + UpdateConfigFile => 0, + UseConfigFile => 0, + UsingIvtvDriver => 1, # default to being able to use the ivtv "enhancements". + DontRecord => 0, # default to always recording data. + DirectoryFormatString => "%I-%c-%d", # format string used to define the sub directory under OutputDirectory + DateTimeFormatString => "+%Y%m%d-%H%M", # format string used to represent the date/time if the user wants it in their DirectoryFormatString + # define the Codec related min/max values + minBitrate => 1, + maxBitrate => 14500000, + minPeakBitrate => 1150, + maxPeakBitrate => 16000000, + # output settings file settings + OutputSettings => 1, # bool 0 or 1 + OutputSettingsName => "video.settings", + OutputSettingsType => "shell", # shell or perl + # other settings + CaptureLastGOP => 1, # default to trying to Capture the Last GOP of the encoder stream. + Debug => 0, + TunerNum => 1, + v4l2DriverVersion => 0, + v4l2DriverVersionStr => "", + v4l2Driver => "", +); + +my $result=""; +my @profileNames=(); # list of user defined sections to work with in the config file. +my %profileOverloads = (); # hash of entries the Profiles overloaded so InputName <-> InputNum works properly. +my %configIni; # config hash we tie to for Config::IniFiles. +my $ivtvObj = Video::ivtv->new(); + +# map the Settings/Config file parameter to the command line variable that specifies it. +my %mappings = ( + "Channel" => "c|channel", + "RecordDuration" => "t|duration", + "InputNum" => "i|inputnum", + "InputName" => "I|inputname", + "OutputDirectory" => "D|directory", + "VideoDevice" => "d|input", + "VideoWidth" => "W|width", + "VideoHeight" => "H|height", + "VideoStandard" => "s|standard", + "VideoType" => "T|type", + "BitrateMode" => "bitrate-mode", + "Bitrate" => "b|bitrate", + "PeakBitrate" => "B|peakbitrate", + "Aspect" => "aspect", + "AudioBitmask" => "audio-bitmask", + "BFrames" => "bframes", + "DNRMode" => "dnrmode", + "DNRSpatial" => "dnrspatial", + "DNRTemporal" => "dnrtemporal", + "DNRType" => "dnrtype", + "Framerate" => "framerate", + "FramesPerGOP" => "framespergop", + "GOPClosure" => "gopclosure", + "Pulldown" => "pulldown", + "StreamType" => "streamtype", + "OutputFileName" => "o|output", + "FrequencyTable" => "f|freqtable", + "Frequency" => "F|frequency", + "ResetCardSettings" => "R|noreset", + "DirectoryFormatString" => "directory-format", + "DateTimeFormatString" => "date-format", + "Debug" => "debug", + "TunerNum" => "tuner-num", + "OutputSettings" => "output-settings", + "OutputSettingsName" => "output-settings-name", + "OutputSettingsType" => "output-settings-type", + "CaptureLastGOP" => "capture-last-gop", + ); + +my %codecMappings = ( + "Aspect" => "aspect", + "AudioBitmask" => "audio_bitmask", + "BFrames" => "bframes", + "BitrateMode" => "bitrate_mode", + "Bitrate" => "bitrate", + "PeakBitrate" => "bitrate_peak", + "DNRMode" => "dnr_mode", + "DNRSpatial" => "dnr_spatial", + "DNRTemporal" => "dnr_temporal", + "DNRType" => "dnr_type", + "Framerate" => "framerate", + "FramesPerGOP" => "framespergop", + "GOPClosure" => "gop_closure", + "Pulldown" => "pulldown", + "StreamType" => "stream_type", + ); + +# check for devfs support +if ( -e "/dev/.devfsd" ) +{ + $settings{VideoDevice} = "/dev/v4l/video0"; +} + +# check for the config file +if (-f $settings{ConfigFileName}) +{ + $settings{UseConfigFile} = 1; + + # tie to it. + tie %configIni, 'Config::IniFiles', (-file => $settings{ConfigFileName}) or die "Error: Opening config file '$settings{ConfigFileName}' failed! $!\n"; + + my $profile = "defaults"; + if (exists $configIni{$profile}) + { + my $saveFile = 0; + # check version of the config file. + if (!exists $configIni{$profile}{$cfgVersionStr}) + { + print "Updating config file to version 1...\n"; + + # first version config file! Update the Audio -> AudioBitmask entries. + $configIni{$profile}{$cfgVersionStr} = 1; + + # find all entries that have Audio and move to AudioBitmask. + foreach my $p (keys %configIni) + { + if (exists $configIni{$p}{Audio}) + { + $configIni{$p}{AudioBitmask} = $configIni{$p}{Audio}; + delete $configIni{$p}{Audio}; + } + } + + $saveFile = 1; # signal we need to save the config changes. + } + if ($configIni{$profile}{$cfgVersionStr} != $cfgVersion) + { + # we need to upgrade + if ($configIni{$profile}{$cfgVersionStr} == 1) + { + print "Updating config file to version 2...\n"; + # add the MSP Matrix related options. + $configIni{$profile}{SetMSPMatrix} = $settings{SetMSPMatrix}; + $configIni{$profile}{MSPInput} = $settings{MSPInput}; + $configIni{$profile}{MSPOutput} = $settings{MSPOutput}; + $configIni{$profile}{MSPSleep} = $settings{MSPSleep}; + $configIni{$profile}{$cfgVersionStr} = 2; + $saveFile = 1; + } + if ($configIni{$profile}{$cfgVersionStr} == 2) + { + print "Updating config file to version 3...\n"; + # remove the MSP Matrix related options from all profiles. + foreach my $p (keys %configIni) + { + foreach my $k (qw(SetMSPMatrix MSPInput MSPOutput MSPSleep)) + { + if (exists $configIni{$p}{$k}) + { + delete $configIni{$p}{$k}; + } + } + } + $configIni{$profile}{CaptureLastGOP} = 1; + $configIni{$profile}{$cfgVersionStr} = 3; + $saveFile = 1; + } + } + + if ($saveFile) + { + # now save the updated config file before we continue. + tied(%configIni)->RewriteConfig or die "Error: Writing config file '$settings{ConfigFileName}' failed! $!\n"; + } + + # update the defaults stored. + foreach my $arg (keys %mappings) + { + if (exists $configIni{$profile}{$arg}) + { + $settings{$arg} = $configIni{$profile}{$arg}; + #print "settings{$arg} = '" . $settings{$arg} . "'\n"; + } + } + } + else + { + print "Warning: config file '$settings{ConfigFileName}' exists but does not have the\n[$profile] section! Use -S to create it without specifying -P.\n\n"; + } +} +else # create the config file +{ + print "Auto Creating config file $settings{ConfigFileName}...\n"; + my $profile = "defaults"; + + # we have to create the config file and tie to it. + tie %configIni, 'Config::IniFiles', () or die "Error: Initializing config file '$settings{ConfigFileName}' failed! $!\n"; + + # now set the name to work with. + tied(%configIni)->SetFileName($settings{ConfigFileName}) or die "Error: Setting config file to '$settings{ConfigFileName}' failed! $!\n"; + + $configIni{$profile} = {}; # make sure the section exists. + + foreach my $arg (keys %mappings) + { + $configIni{$profile}{$arg} = $settings{$arg}; + print "configIni{$profile}{$arg} = '" . $settings{$arg} . "'\n" if $settings{Debug}; + } + + # set the config file version + $configIni{$profile}{$cfgVersionStr} = $cfgVersion; + + # write the config file out. + tied(%configIni)->RewriteConfig or die "Error: Writing config file '$settings{ConfigFileName}' failed! $!\n"; +} + +# build up the "custom" frequency table +my %customMap = (); +foreach my $profileName (keys %configIni) +{ + next if $profileName =~ /^(defaults)$/; + + if (exists $configIni{$profileName}{Frequency}) + { + $customMap{$profileName} = $configIni{$profileName}{Frequency}; + } +} +$CHANLIST{custom} = \%customMap; + +# enumerations +my @standards; +my %name2std; +my @inputs; +my %name2input; +my @codecInfo; # stores the Codec Info +my @newCodecInfo; # the version we mess with. +# Current settings (Input, Channel, Standard) +my $curinput; +my $curinputName; +my $std; +my $curstd = "???"; +my $curStandard = 0; # numeric representation. +my $curChannel = 0; +my $curFrequency = 0; + +my $tuner; +my $settingsFH; # File Handle for output settings. +my $err; +my $v4l2input; + +my $tmpDirectoryStr = formatDirectoryString(); +my $versionStr = "record-v4l2.pl $version for use with http://ivtv.sf.net/"; +my $usageStr = <<"END_OF_USAGE"; +$versionStr + +Usage: record-v4l2.pl [--channel CHANNEL] [--duration TIME] + [--directory DIRECTORY] [--output OUTPUT] + [--directory-format FORMAT] [--date-format FORMAT] + [--input VIDEO_DEV][--width WIDTH --height HEIGHT] + [--standard STANDARD] [--type TYPE] + [--inputnum INPUT#] [--inputname INPUT NAME] + [--freqtable FREQENCY MAP] [--frequency FREQUENCY] + [--bitrate-mode MODE] + [--bitrate BITRATE] [--peakbitrate PEAK_BITRATE] + [--profile PROFILE] [--list-freqtable] [--list-channels] + [--no-record] [--noreset] [--save] [--help] [--version] + [--aspect ASPECT] [--audio-bitmask AUDIO-BITMASK] [--bframes BFRAMES] + [--dnrmode DNRMODE] [--dnrspatial DNRSPATIAL] + [--dnrtemporal DNRTEMPORAL] [--dnrtype DNRTYPE] + [--framerate FRAMERATE] [--framespergop FRAMESPERGOP] + [--gopclosure GOPCLOSURE] [--capture-last-gop GOP_END] + [--pulldown PULLDOWN] [--streamtype STREAMTYPE] [--debug] + [--tuner-num TUNERNUM] [--output-settings BOOL] + [--output-settings-name FNAME] [--output-settings-type TYPE] + [--list-inputs] [--list-standards] [CHANNEL] + + -c/--channel CHANNEL: channel number to switch to + NOTE: You can also specify the channel by itself. + Ex. record-v4l2.pl 73 + would change to channel 73 using the default settings + or the settings from your ~/.ivtvrc config file. + -t/--duration TIME: number of seconds to record + -D/--directory DIRECTORY: Base directory to record into + --directory-format FORMAT: format string that specifies the + sub-directory to create under the base directory that + the output file will be created in. This can be empty + to indicate no sub-directory should be created. + + Available tokens are: + %d - date formatted by --date-format + %I - input name recorded from + Any white space in the name is converted to + underscores (_). Ex. 'Tuner 0' => 'Tuner_0' + + %c - channel or "freq-#" frequency + + --date-format FORMAT: format string that specifies the + date format string to generate and substitute for + %d in the --directory-format string. + + Available tokens: see the date commands man page. + The string must start with a + (plus). + + -o/--output OUTPUT: name of file to create + -d/--input VIDEO_DEV: video device to capture from + -W/--width WIDTH: width of screen (720 for NTSC fullscreen) + -H/--height HEIGHT: height of screen (480 for NTSC fullscreen) + -s/--standard STANDARD: NTSC, PAL or SECAM - video standard to record in + -T/--type TYPE: mpeg or yuv output + -i/--inputnum INPUT#: + The index number of the input you want to use (0 -> n-1) + -I/--inputname INPUT NAME: The name of the input you want to use. + -f/--freqtable FREQUENCY MAP: Specify the frequency mapping to use. + -F/--frequency FREQUENCY: Specify the frequency to tune to. + ex. 517250 = NTSC Cable 73 (SCiFi) + --tuner-num TUNERNUM: Specify the tuner to use. + -L/--list-freqtable: + list all available frequency mappings that Video::Frequencies knows + --list-channels: lists all channels and their frequencies for the + specified frequency table being used. + --list-inputs: lists all inputs the v4l2 driver reports. + --list-standards: lists all Video Standards the v4l2 driver supports. + -R/--noreset: Do not Reset anything that was changed + (standard, channel, resolution, etc.) + --no-record: Do not create any directories, capture data or reset the card + back to original settings. This is the ptune.pl mode. + -h/--help: display this help + -v/--version: display the version of this program + --debug: turns on debug output + --output-settings BOOL: Turns on or off the creation of the settings + file that contains perl or shell variables that + represent the settings used to record the video file. + This feature is ignored if --no-record specified. + --output-settings-name FNAME: The name of the file to write the settings to. + It must end in .settings. + --output-settings-type TYPE: Either 'shell' or 'perl'. + If 'shell', then all variables output are prefixed with REC_ + and are upper cased. Ex: StreamType => REC_STREAMTYPE="14" + If 'perl', then all variables output are created in the + %settings hash. Ex: StreamType => $settings{StreamType} = "14"; + + Codec related options: + --bitrate-mode MODE: 0 = VBR, 1 = CBR + -b/--bitrate BITRATE: Specify the Bitrate to capture at in Mbps + -B/--peakbitrate PEAK_BITRATE: Specify the Peak Bitrate to capture at in Mbps + --aspect ASPECT: Specify the aspect ratio + --audio-bitmask AUDIO-BITMASK: Specify the audio bitmask value + --bframes BFRAMES: Specify the number of B frames value + --dnrmode DNRMODE: Specify the dnr_mode value + --dnrspatial DNRSPATIAL: Specify the dnr_spatial value + --dnrtemporal DNRTEMPORAL: Specify the dnr_temporal value + --dnrtype DNRTYPE: Specify the dnr_type value + --framerate FRAMERATE: Specify the framerate value. 0 = 30fps, 1 = 25fps + --framespergop FRAMESPERGOP: Specify the GOP size + --gopclosure GOPCLOSURE: Specify if you want open/closed GOP's. + --capture-last-gop GOP_END: Specify if you want the encoder stream to try and + capture the last GOP, thus generating a 100% valid mpeg2 file. + 1 = yes (default), 0 = no. + --pulldown PULLDOWN: 1 = Inverse telecine on, 0 = off + --streamtype STREAMTYPE: Specify the stream_type value + Valid Values are: + 0 - PS + 1 - TS + 2 - MPEG1 + 3 - PES_AV + 5 - PES_V + 7 - PES_A + 10 - DVD + 11 - VCD + 12 - SVCD + 13 - DVD-Special 1 + 14 - DVD-Special 2 + + Config file related options: + -P/--profile PROFILE: Override defaults and command line values with the + config entries in the section labeled [PROFILE] from the + config file $settings{ConfigFileName}. + Examples: -P NTSC-DVD, -P PAL-DVD, --profile MY-SETTINGS + + You can specify this option multiple times and each successive + profile will overlay the defaults and any previous profiles. + You will not be able to create/update a profile if you do + specify multiple profiles. + -S/--save: save the current values as the defaults in + $settings{ConfigFileName}. + If -P/--profile PROFILE is specified, then those values that exist in + the specified profile will be updated. If the profile doesn't exist, + then it will be created, but will have all possible config items + defined in it. It will be your responsibility to hand check the + config file and remove any config items you do not want set for + that profile. + Any options specified on the command line will override options + defined in the config file. + +Notes: + If you specify both -i/--inputnum and -I/--inputname then + -i/--inputnum will take precedence. + + If you specify both -c/--channel and -F/--frequency then + -F/--frequency will take precedence. + + If you use a Profile, it has the ability to override all command line + arguments, so check your Profile first if things seem to be ignored. + +Defaults: + --duration $settings{RecordDuration} --input $settings{VideoDevice} --width $settings{VideoWidth} --height $settings{VideoHeight} --standard $settings{VideoStandard} + --type $settings{VideoType} --directory $settings{OutputDirectory} --output $settings{OutputFileName} + --directory-format "$settings{DirectoryFormatString}" --date-format "$settings{DateTimeFormatString}" + --inputnum $settings{InputNum} --inputname '$settings{InputName}' --freqtable $settings{FrequencyTable} --capture-last-gop $settings{CaptureLastGOP} + --bitrate $settings{Bitrate} --peakbitrate $settings{PeakBitrate} --aspect $settings{Aspect} --audio-bitmask $settings{AudioBitmask} --bframes $settings{BFrames} + --dnrmode $settings{DNRMode} --dnrspatial $settings{DNRSpatial} --dnrtemporal $settings{DNRTemporal} --dnrtype $settings{DNRType} + --framerate $settings{Framerate} --framespergop $settings{FramesPerGOP} --gopclosure $settings{GOPClosure} --pulldown $settings{Pulldown} --streamtype $settings{StreamType} + --tuner-num $settings{TunerNum} --output-settings $settings{OutputSettings} --output-settings-name $settings{OutputSettingsName} --output-settings-type $settings{OutputSettingsType} + + config file = '$settings{ConfigFileName}' + + If Channel = $settings{Channel}, this would create: + $tmpDirectoryStr$settings{OutputFileName} + + Note: This script relies on Perl Modules: Video::Frequencies, Video::ivtv, + Config::IniFiles and Getopt::Long. +END_OF_USAGE + +# handle user input here +my %opts; +#getopts('c:t:o:hd:W:H:s:T:D:vi:I:f:F:LRb:B:P:S', \%opts); +GetOptions(\%opts, "channel|c=s", "duration|t=i", "output|o=s", "help|h", "input|d=s", "width|W=i", "height|H=i", "standard|s=s", + "type|T=s", "directory|D=s", "version|v", "inputnum|i=i", "inputname|I=s", "freqtable|f=s", "frequency|F=i", "list-freqtable|L", + "noreset|R", "bitrate|b=i", "peakbitrate|B=i", "profile|P=s@", "save|S", "aspect=i", "audio-bitmask=s", "bframes=i", "dnrmode=i", "dnrspatial=i", + "dnrtemporal=i", "dnrtype=i", "framerate=i", "framespergop=i", "gopclosure=i", "pulldown=i", "capture-last-gop=i", + "streamtype=i", "no-record", "directory-format=s", "date-format=s", "debug", "list-channels", + "tuner-num=i", "list-inputs", "list-standards", "bitrate-mode=i", "output-settings=i", "output-settings-name=s", "output-settings-type=s"); +if (scalar keys %opts == 0 && @ARGV == 0) +{ + usage(0, ""); +} +foreach my $option (sort keys %opts) +{ + my $found = 0; + foreach my $mapName (keys %mappings) + { + if ($option =~ /^($mappings{$mapName})$/) + { + $settings{$mapName} = $opts{$option}; + $found = 1; + print "$mapName = '$opts{$option}'\n" if $settings{Debug}; + } + } + if (!$found) + { + # handle the non-settings cases. + if ($option =~ /^(L|list-freqtable)$/) + { + my $errStr = "\nAvailable Frequency Mappings:\n"; + foreach my $name (sort keys %CHANLIST) + { + $errStr .= "$name\n"; + } + print "$versionStr\n$errStr"; + exit 0; + } + elsif ($option eq "list-channels") + { + my $errStr = "\nAvailable Channels for $settings{FrequencyTable}:\n"; + foreach my $name (sort { $a <=> $b } keys %{$CHANLIST{$settings{FrequencyTable}}}) + { + $errStr .= "$name\t= $CHANLIST{$settings{FrequencyTable}}->{$name}\n"; + } + print "$versionStr\n$errStr"; + exit 0; + } + elsif ($option =~ /^(no-record)$/) + { + $settings{DontRecord} = 1; + } + elsif ($option =~ /^(S|save)$/) + { + $settings{UpdateConfigFile} = 1; + } + elsif ($option =~ /^(P|profile)$/) + { + @profileNames = @{$opts{$option}}; + } + elsif ($option =~ /^(v|version)$/) + { + print "$versionStr\n"; + exit 0; + } + elsif ($option =~ /^(h|help)$/) + { + usage(0, ""); + } + elsif ($option =~ /^(list-inputs|list-standards)$/) + { + # do nothing for now since they will be handled later. + } + else + { + usage(1, "-$option is an unknown option!"); + } + } +} + +if (@profileNames) +{ + # loop over all profiles the user specified. + foreach my $profileName (@profileNames) + { + print "profile = '$profileName'\n" if $settings{Debug}; + # for now the profile can not be "defaults". + if ($profileName eq "defaults") + { + error(1, "Profile = '$profileName' is invalid!"); + } + if (exists $configIni{$profileName}) + { + # update defaults that exist in this profile as long as the entry wasn't specified on the command line. + my $profile = $profileName; + + foreach my $arg (keys %mappings) + { + # handle the long/short command option versions + my $cmdSpecified = 0; + foreach my $option (split(/\|/, $mappings{$arg})) + { + if (exists $opts{$option}) + { + $cmdSpecified = 1; + last; + } + } + #print "arg = '$arg', option = '$option'\n" if $settings{Debug}; + if (exists $configIni{$profile}{$arg} && !$cmdSpecified) + { + $profileOverloads{$arg} = $settings{$arg}; # preserve the old value. + $settings{$arg} = $configIni{$profile}{$arg}; + print "settings{$arg} = '" . $settings{$arg} . "'\n" if $settings{Debug}; + } + } + } + else + { + if ($settings{UpdateConfigFile} && @profileNames == 1) + { + print "Warning: Profile = '$profileName' will be created.\n" if ($settings{Debug}); + } + else + { + error(1, "Profile = '$profileName' does not exist! You must specify -S/--save to create it."); + } + } + } +} + +# verify input + +if (@ARGV) +{ + if (exists $opts{c} || exists $opts{channel}) + { + print "Warning: ignoring channel argument and using '$ARGV[0]' instead.\n"; + } + $settings{Channel} = $ARGV[0]; +} + +my $directoryName; +if (!$settings{DontRecord}) +{ + print "RecordDuration = $settings{RecordDuration}\n" if $settings{Debug}; + + if ($settings{VideoType} !~ /^(mpeg|yuv)$/) + { + error(1, "Video Type = '$settings{VideoType}' is invalid!"); + } + if ($settings{VideoType} eq "yuv") + { + # see if we need to change our defaults. + if (!exists $opts{o} && !exists $opts{output}) + { + $settings{OutputFileName} = "video.yuv"; + } + if (!exists $opts{d} && !exists $opts{input}) + { + if ( -e "/dev/.devfsd" ) + { + $settings{VideoDevice} = "/dev/v4l/yuv0"; + } + else + { + $settings{VideoDevice} = "/dev/yuv0"; + } + } + } + + if ( ! -d "$settings{OutputDirectory}") + { + $result = `mkdir -p $settings{OutputDirectory}`; + } + # make directory + $directoryName = formatDirectoryString(); + $result=`mkdir -p $directoryName`; +} + +# verify the output-settings options +if ($settings{OutputSettings} !~ /^[01]$/) +{ + error(1, "OutputSettings = '$settings{OutputSettings}' is invalid!"); +} +if ($settings{OutputSettings} && $settings{DontRecord}) +{ + $settings{OutputSettings} = 0; # turn off feature since we are not recording. +} +if ($settings{OutputSettings}) +{ + if ($settings{OutputSettingsName} !~ /^(.+\.settings)$/) + { + error(1, "OutputSettingsName = '$settings{OutputSettingsName}' is invalid! It must end in .settings."); + } + if ($settings{OutputSettingsType} !~ /^(shell|perl)$/) + { + error(1, "OutputSettingsType = '$settings{OutputSettingsType}' is invalid! It must be either 'shell' or 'perl'."); + } + sysopen($settingsFH, "$directoryName/$settings{OutputSettingsName}", O_CREAT | O_WRONLY) or die "Error creating file '$settings{OutputSettingsName}': $!\n"; + outputSettingSetup(); +} + +if ( ! -c "$settings{VideoDevice}") +{ + error(1, "Video Dev = '$settings{VideoDevice}' is invalid! $!"); +} + +# now that the video device has been semi validated, we can use it to lookup +# the inputs, standards, etc. and use that for validating some of the following +# pieces of user input. +sysopen($tuner, $settings{VideoDevice}, O_RDWR) or die "Error unable to open '$settings{VideoDevice}': $!"; +my $tunerFD = fileno($tuner); + +outputSetting("VideoDevice"); + +# get the current capabilities. +@capabilities = $ivtvObj->getCapabilities($tunerFD); +if (@capabilities != keys %{$ivtvObj->{capIndexes}}) +{ + error(1, "getCapabilities() failed!"); +} +# calculate the driver version info. +my $driverVersionHex = sprintf("%08x", $capabilities[$ivtvObj->{capIndexes}{version}]); +$driverVersionHex =~ /^(\d{4})(\d{2})(\d{2})$/; +my $driverVersionMajor = int($1); +my $driverVersionMinor = int($2); +my $driverVersionPatch = int($3); +my $driverVersionStr = $driverVersionMajor . "." . $driverVersionMinor . "." . $driverVersionPatch; + +$settings{v4l2DriverVersion} = $capabilities[$ivtvObj->{capIndexes}{version}]; +$settings{v4l2DriverVersionStr} = $driverVersionStr; +$settings{v4l2Driver} = $capabilities[$ivtvObj->{capIndexes}{driver}]; +outputSetting("v4l2Driver"); +outputSetting("v4l2DriverVersion"); +outputSetting("v4l2DriverVersionStr"); + +if ($settings{Debug}) +{ + print "V4l2 Capabilities: driver='$capabilities[$ivtvObj->{capIndexes}{driver}]', version='$capabilities[$ivtvObj->{capIndexes}{version}]', '$driverVersionStr'\n"; +} +if ($capabilities[$ivtvObj->{capIndexes}{driver}] ne "ivtv") +{ + $settings{UsingIvtvDriver} = 0; # we can't use the ivtv "enhancements". + print "Warning: V4l2 driver = '$capabilities[$ivtvObj->{capIndexes}{driver}]' does not support the ivtv \"enhancements\"!\n"; + print " All codec and ivtv specific options will be ignored.\n\n"; +} +elsif ($capabilities[$ivtvObj->{capIndexes}{version}] <= 265) +{ + $settings{CaptureLastGOP} = 0; # we can't use the ivtv GOP_END feature. + print "Warning: ivtv driver is not new enough to use the GOP_END feature!\n"; +} +$ivtvVersion = $capabilities[$ivtvObj->{capIndexes}{version}]; + +my $i; + +# get the current video standard +$std = $ivtvObj->getStandard($tunerFD); +if ($std > 0) +{ + printf("Standard: 0x%08x\n",$std) if ($settings{Debug}); +} +else +{ + die "Error: getStandard() failed!\n"; +} + +# get the current input +$curinput = $ivtvObj->getInput($tunerFD); +if ($curinput < 0) +{ + die "Error: getInput() failed!\n"; +} +printf("Input: 0x%08x\n",$curinput) if ($settings{Debug}); + +# flags to indicate when we should stop reading from the card. +my $done=0; +my $stopGOP=0; # indicates if we are asking for the Last GOP +my $endStream=0; # indicates if we are in the final read state. +# Standards +for ($i=0; !$done; ++$i) +{ + my($index,$std_id,$name,$frameperiod_n,$frameperiod_d,$framelines) = $ivtvObj->enumerateStandard($tunerFD, $i); + if ($index == -1) + { + $done = 1; + } + else + { + printf("%d 0x%08x %s %d/%d %d\n",$index,$std_id,$name,$frameperiod_n,$frameperiod_d,$framelines) if ($settings{Debug}); + push @standards, [($name,$std_id)]; + $name2std{$name} = $std_id; + if( (($std_id & $std) == $std)) + { + $curstd = $name; + $curStandard = $std; + } + } +} + +if (exists $opts{'list-standards'}) +{ + print "$versionStr\n"; + print "Available Video Standards:\n"; + foreach my $standard (@standards) + { + print "$standard->[0]\n"; + } + exit 0; +} + +$done=0; +# Inputs +for ($i=0; !$done; ++$i) +{ + my($index,$name,$type,$audioset,$tuner,$std,$status) = $ivtvObj->enumerateInput($tunerFD, $i); + if ($index == -1) + { + $done = 1; + } + else + { + push @inputs, $name; + $name2input{$name} = $index; + } +} +$curinputName = $inputs[$curinput]; + +if (exists $opts{'list-inputs'}) +{ + print "$versionStr\n"; + print "Available Inputs:\n"; + my $counter = 0; + foreach my $input (@inputs) + { + print "$counter: $input\n"; + $counter++; + } + exit 0; +} + +if ($settings{UsingIvtvDriver}) +{ + # get the current Codec Info + @codecInfo = $ivtvObj->getCodecInfo($tunerFD); + if (@codecInfo != keys %{$ivtvObj->{codecIndexes}}) + { + error(1, "getCodecInfo() failed!"); + } + @newCodecInfo = $ivtvObj->getCodecInfo($tunerFD); + if (@newCodecInfo != keys %{$ivtvObj->{codecIndexes}}) + { + error(1, "getCodecInfo() failed!"); + } +} + +# finish validating the user input. + +if (!$settings{DontRecord}) +{ + if ($settings{RecordDuration} !~ /^(\d+)$/) + { + error(1, "Time = '$settings{RecordDuration}' is invalid!"); + } + + outputSetting("RecordDuration"); + outputSetting("OutputDirectory"); + + # assume for now we are only generating mpeg files. +# if (($settings{VideoType} eq "mpeg" && $settings{OutputFileName} !~ /^.+\.mpg$/) || ($settings{VideoType} eq "yuv" && $settings{OutputFileName} !~ /^.+\.yuv$/)) +# { +# error(1, "Output = '$settings{OutputFileName}' is invalid!"); +# } + + outputSetting("VideoType"); + outputSetting("OutputFileName"); + + if ($settings{DateTimeFormatString} !~ /^(\+((\%.)|.)+)$/) + { + usage(1, "Date Format String = '$settings{DateTimeFormatString}' is invalid!"); + } + + outputSetting("DateTimeFormatString"); +} + +if ($settings{VideoWidth} !~ /^(\d+)$/) +{ + error(1, "Width = '$settings{VideoWidth}' is invalid!"); +} + +outputSetting("VideoWidth"); + +if ($settings{VideoHeight} !~ /^(\d+)$/) +{ + error(1, "Height = '$settings{VideoHeight}' is invalid!"); +} + +outputSetting("VideoHeight"); + +if (!exists $name2std{$settings{VideoStandard}}) +{ + my $validStandards = join(", ", keys(%name2std)); + error(1, "Video Standard = '$settings{VideoStandard}' is invalid!\nValid Standards are: $validStandards"); +} + +outputSetting("VideoStandard"); + +if (exists $opts{i} || exists $opts{inputnum} || ($settings{InputNum} != $name2input{$settings{InputName}} && exists $profileOverloads{InputNum})) +{ + if ($settings{InputNum} < 0 || $settings{InputNum} >= scalar(@inputs)) + { + error(1, "Video Input = '$settings{InputNum}' is invalid!\nValid Inputs are from 0 - " . int(scalar(@inputs) - 1)); + } + $settings{InputName} = $inputs[$settings{InputNum}]; +} + +if ((exists $opts{I} || exists $opts{inputname} || $settings{InputNum} != $name2input{$settings{InputName}}) && !(exists $opts{i} || exists $opts{inputnum})) +{ + if (!exists $name2input{$settings{InputName}}) + { + my $validInputs = join(", ", @inputs); + error(1, "Video Input Name = '$settings{InputName}' is invalid!\nValid Input Names are: $validInputs"); + } + $settings{InputNum} = $name2input{$settings{InputName}}; +} + +outputSetting("InputName"); +outputSetting("InputNum"); + +if (!exists $CHANLIST{$settings{FrequencyTable}}) +{ + error(1, "Frequency Table = '$settings{FrequencyTable}' is invalid!"); +} + +outputSetting("FrequencyTable"); + +# only validate the channel if the input is a tuner. +if ($inputs[$settings{InputNum}] =~ /Tuner/) +{ + if ($settings{TunerNum} !~ /^(\d)$/) + { + error(1, "TunerNum = '$settings{TunerNum}' is invalid!"); + } + if (exists $opts{F} || exists $opts{frequency} || $settings{Frequency}) # the user may have specified a Frequency in their config file + { + if ($settings{Frequency} !~ /^(\d+)$/) + { + error(1, "Frequency = '$settings{Frequency}' is invalid!"); + } + $settings{Channel} = "freq-$settings{Frequency}"; # make sure we output the channel part. + } + # now verify that the channel exists in the frequency table! + else + { + if (!$settings{Channel}) + { + error(1, "channel = '$settings{Channel}' is invalid!"); + } +## start new MMM # first verify the freqency table is appropriate for the standard (NTSC, PAL, SECAM), + # unless they specified the frequency to tune to. + if ($settings{FrequencyTable} !~ /^(custom|$settings{VideoStandard})/i) + { + error(1, "You specified Video Standard '$settings{VideoStandard}' which is incompatible with Frequency Table '$settings{FrequencyTable}'!"); + } ## end new MMM + if (!exists $CHANLIST{$settings{FrequencyTable}}->{$settings{Channel}}) + { + error(1, "Channel = '$settings{Channel}' does not exist in Frequency Table '$settings{FrequencyTable}'!"); + } + } + + outputSetting("Channel"); + outputSetting("Frequency"); + + # get the current channel/frequency value. + my $Frequency; + if(($Frequency = $ivtvObj->getFrequency($tunerFD, $settings{TunerNum})) > 0) + { + my $freq = ($Frequency * 1000) / 16; + print "freq = $freq\n" if ($settings{Debug}); + # find the associated channel. + if ((!exists $opts{F} && !exists $opts{frequency} && !$settings{Frequency}) && ($curstd eq $settings{VideoStandard}) ) + { + foreach my $chan (keys %{$CHANLIST{$settings{FrequencyTable}}}) + { + if ($CHANLIST{$settings{FrequencyTable}}->{$chan} == $freq) + { + $curChannel = $chan; + } + } + print "curChannel = $curChannel\n" if ($settings{Debug}); + } + else + { + $curFrequency = $freq; + } + } + elsif ($Frequency < 0) + { + die "Error: getFrequency() failed!\n"; + } +} +else +{ + # set the channel = "" so we know to ignore it. + $settings{Channel} = ""; +} + +if ($settings{UsingIvtvDriver}) +{ + # validate the Codec related stuff. + if ($settings{BitrateMode} !~ /^(0|1)$/) + { + error(1, "BitrateMode = '$settings{BitrateMode}' is invalid!"); + } + if ($settings{Bitrate} < $settings{minBitrate} || $settings{Bitrate} > $settings{maxBitrate}) + { + error(1, "Bitrate = '$settings{Bitrate}' is invalid!"); + } + if ($settings{PeakBitrate} < $settings{Bitrate}) + { + error(1, "PeakBitrate can not be less than Bitrate!"); + } + elsif ($settings{PeakBitrate} == $settings{Bitrate} && !$settings{BitrateMode} == 1) + { + error(1, "PeakBitrate can not be equal to Bitrate in VBR Mode!"); + } + elsif ($settings{PeakBitrate} < $settings{minPeakBitrate} || $settings{PeakBitrate} > $settings{maxPeakBitrate}) + { + error(1, "PeakBitrate = '$settings{PeakBitrate}' is invalid!"); + } + + if ($settings{VideoStandard} !~ /^(NTSC)/) + { + my $warn = 0; + if ($settings{Framerate} == 0) + { + $settings{Framerate} = 1; + $warn = 1; + } + if ($settings{FramesPerGOP} == 15) + { + $settings{FramesPerGOP} = 12; + $warn = 1; + } + if ($warn) + { + print "Warning: Setting Framerate/FramesPerGOP to PAL settings for Video Standard '$settings{VideoStandard}'!\n\nYou should either specify on the command line or in the ~/.ivtvrc config file.\n"; + } + } + elsif ($settings{VideoStandard} =~ /^(NTSC)/) + { + my $warn = 0; + if ($settings{Framerate} == 1) + { + $settings{Framerate} = 0; + $warn = 1; + } + if ($settings{FramesPerGOP} == 12) + { + $settings{FramesPerGOP} = 15; + $warn = 1; + } + if ($warn) + { + print "Warning: Setting Framerate/FramesPerGOP to NTSC settings for Video Standard '$settings{VideoStandard}'!\n\nYou should either specify on the command line or in the ~/.ivtvrc config file.\n"; + } + } + + if ($settings{StreamType} < 0 || $settings{StreamType} > 14) + { + error(1, "StreamType = '$settings{StreamType}' is invalid!"); + } + + if ($settings{CaptureLastGOP} < 0 || $settings{CaptureLastGOP} > 1) + { + error(1, "CaptureLastGOP = '$settings{CaptureLastGOP}' is invalid!"); + } + + outputSetting("BitrateMode"); + outputSetting("Bitrate"); + outputSetting("PeakBitrate"); + outputSetting("SetMSPMatrix"); + outputSetting("MSPInput"); + outputSetting("MSPOutput"); + outputSetting("Framerate"); + outputSetting("FramesPerGOP"); + outputSetting("Aspect"); + outputSetting("AudioBitmask"); + outputSetting("BFrames"); + outputSetting("DNRMode"); + outputSetting("DNRSpatial"); + outputSetting("DNRTemporal"); + outputSetting("DNRType"); + outputSetting("GOPClosure"); + outputSetting("Pulldown"); + outputSetting("StreamType"); + outputSetting("CaptureLastGOP"); +} + +# update the config file if the user wants us to. +if ($settings{UpdateConfigFile}) +{ + my $profile; + if (@profileNames > 1) + { + print "Warning: Not updating config file as you have more than 1 profile specified!\n"; + } + elsif (@profileNames == 1) + { + $profile = $profileNames[0]; + } + else + { + $profile = "defaults"; + } + if ($profile) + { + my $createProfile = (exists $configIni{$profile} ? 0 : 1); + print "Creating Profile = '$profile': $createProfile\n" if ($settings{Debug}); + + if (!$settings{UseConfigFile}) + { + # we have to create the config file and tie to it. + tie %configIni, 'Config::IniFiles', () or die "Error: Initializing config file '$settings{ConfigFileName}' failed! $!\n"; + + # now set the name to work with. + tied(%configIni)->SetFileName($settings{ConfigFileName}) or die "Error: Setting config file to '$settings{ConfigFileName}' failed! $!\n"; + + $configIni{$profile} = {}; # make sure the section exists. + } + + foreach my $arg (keys %mappings) + { + foreach my $option (split(/\|/, $mappings{$arg})) # handle the long/short command option versions + { + if (exists $configIni{$profile}{$arg} || $createProfile || exists $opts{$option}) + { + $configIni{$profile}{$arg} = $settings{$arg}; + print "configIni{$profile}{$arg} = '" . $settings{$arg} . "'\n" if $settings{Debug}; + last; + } + } + } + + # write the config file out. + tied(%configIni)->RewriteConfig or die "Error: Writing config file '$settings{ConfigFileName}' failed! $!\n"; + } +} + +# this hash keeps track of those values I have to set back. +my %changedSettings = ( + resolution => 0, + standard => 0, + VideoType => 0, + InputNum => 0, + Channel => 0, + Frequency => 0, + codec => 0, + ); + +# change the channel +if ($inputs[$settings{InputNum}] =~ /Tuner/) +{ + if (exists $opts{F} || exists $opts{frequency} || $settings{Frequency}) + { + if ($settings{Frequency} != $curFrequency) + { + $changedSettings{Frequency} = 1; + tuneFrequency($settings{Frequency}); + } + } + else + { + if ($curstd ne $settings{VideoStandard}) + { + # we have to set the channel regardless. + # but we want to tune back to the previous frequency. + $changedSettings{Frequency} = 1; + changeChannel($settings{Channel}); + } + elsif ($settings{Channel} ne $curChannel) + { + # otherwise we just changeChannel and restore the previous channel. + $changedSettings{Channel} = 1; + changeChannel($settings{Channel}); + } + } +} + +# set the video standard +if ($settings{VideoStandard} ne $curstd) +{ + $changedSettings{standard} = 1; + change_standard(); +} + +# set the input +if ($settings{InputNum} != $curinput || $settings{InputName} ne $curinputName) +{ + $changedSettings{InputNum} = 1; + if (!(exists $opts{i} || exists $opts{inputnum} || exists $opts{I} || exists $opts{inputname} || exists $profileOverloads{InputNum} || exists $profileOverloads{InputName})) # our defaults are different than the current values! + { + print "Warning: Changing input from '$curinputName' to'$settings{InputName}'.\n"; + } + change_input(); +} + +# set the capture type + +# store the current width,height so we can restore afterwards +my ($oldWidth, $oldHeight) = $ivtvObj->getResolution($tunerFD); +print "oldWidth = '$oldWidth', oldHeight = '$oldHeight'\n" if ($settings{Debug}); + +if ($settings{VideoWidth} != $oldWidth || $settings{VideoHeight} != $oldHeight) +{ + $changedSettings{resolution} = 1; +} + +# specify the width,height to capture +if ($changedSettings{resolution}) +{ + $result = $ivtvObj->setResolution($tunerFD, $settings{VideoWidth}, $settings{VideoHeight}); + if (not defined $result) + { + die "Error calling setResolution!\n"; + } + if (!$result) + { + die "Error in setResolution ioctl call!\n"; + } +} + +if ($settings{UsingIvtvDriver}) +{ + # set the GOP_END flag if the user requested it. + if ($ivtvVersion > 265) # > 0.1.9 + { + $result = $ivtvObj->setEndGOP($tunerFD, $settings{CaptureLastGOP}); + if (!$result) + { +## L1312 macmil_co_jp MMM die "Error calling setEndGOP($settings{CaptureLastGOP})!\n"; + } + } + + # specify the codec options to capture mpeg's at. + foreach my $codecName (keys %codecMappings) + { + my $codecIndex = $ivtvObj->{codecIndexes}{$codecMappings{$codecName}}; + if ($codecInfo[$codecIndex] != $settings{$codecName}) + { + $changedSettings{codec} = 1; + $newCodecInfo[$codecIndex] = $settings{$codecName}; + print "new $codecName = '$settings{$codecName}', old $codecName = '$codecInfo[$codecIndex]'\n" if $settings{Debug}; + } + } +} + +if ($changedSettings{codec}) +{ + $result = $ivtvObj->setCodecInfo($tunerFD, @newCodecInfo); + if (!$result) + { +## L1334 macmil_co_jp MMM die "Error calling setCodecInfo()!\n"; + } +} + +if (!$settings{DontRecord}) +{ + close($settingsFH) if ($settings{OutputSettings}); + + # capture the video/audio to video.mpg + captureVideo(directoryName => $directoryName, RecordDuration => $settings{RecordDuration}, + OutputFileName => $settings{OutputFileName}, tuner => $tuner); +} + +if ($settings{ResetCardSettings} && !$settings{DontRecord}) +{ + # close and re-open the device since it appears to not like taking new settings if we ended capturing. + close($tuner); + sysopen($tuner, $settings{VideoDevice}, O_RDWR) or die "Error unable to open '$settings{VideoDevice}': $!"; + $tunerFD = fileno($tuner); + + # restore Codec values + if ($changedSettings{codec}) + { + $result = $ivtvObj->setCodecInfo($tunerFD, @codecInfo); + if (!$result) + { +## L1360 macmil_co_jp MMM die "Error calling setCodecInfo()!\n"; + } + } + + # restore the previous input setting + if ($changedSettings{InputNum}) + { + # reset back to the old input name + $settings{InputName} = $curinputName; + change_input(); + } + + # restore the previous video standard + if ($changedSettings{standard}) + { + $settings{VideoStandard} = $curstd; + change_standard(); + } + + # restore the previous width,height settings + if ($changedSettings{resolution}) + { + $result = $ivtvObj->setResolution($tunerFD, $oldWidth, $oldHeight); + if (not defined $result) + { + die "Error calling setResolution!\n"; + } + if (!$result) + { + die "Error in setResolution ioctl call! result = '$result', oldWidth = '$oldWidth', oldHeight = '$oldHeight'\n"; + } + } + + # restore the previous channel + if ($changedSettings{Channel} && $curChannel > 0) + { + changeChannel($curChannel); + } + if ($changedSettings{Frequency} && $curFrequency > 0) + { + tuneFrequency($curFrequency); + } +} + +# close the tuner device +close($tuner); + +exit 0; + +# usage(returnValue, ErrorString) +# returnValue = 1 or 0 +# ErrorString = message you want to tell the user, but only if returnValue = 1. +sub usage +{ + my $errorCode = shift; + my $error = shift; + + print $usageStr; + print "\nError: $error\n" if ($errorCode == 1); + print "$error\n" if ($errorCode == 2); + + exit $errorCode; +} + +# error(returnValue, ErrorString) +# returnValue = 1 or 0 +# ErrorString = message you want to tell the user. +sub error +{ + my $errorCode = shift; + my $error = shift; + + print "$versionStr"; + print "\nError: $error\n"; + + exit $errorCode; +} + +# changes the input to $settings{InputNum} as long as it isn't = $curinput +sub change_input { + my $preinput = $name2input{$settings{InputName}}; + if($preinput != $curinput) + { + $curinput = $preinput; + print "input now $settings{InputName}, #$preinput\n" if ($settings{Debug}); + my $result = $ivtvObj->setInput($tunerFD, $preinput); + if (!$result) + { + die "Error: setInput($preinput) failed!\n"; + } + } +} + +# changes the video standard to $settings{VideoStandard} as long as it isn't = $curstd +sub change_standard { + my $standard = $name2std{$settings{VideoStandard}}; + if($standard != $curStandard) + { + $curStandard = $standard; + print "standard now $settings{VideoStandard}, #$standard\n" if ($settings{Debug}); +## L1460 v060406.pl MMM my $result = $ivtvObj->setStandard($tunerFD, $standard); + if (!$result) + { +## L1463 v060406.pl MMM die "Error: setStandard($standard) failed!\n"; + } + } +} + +# changes the channel +# takes the channel to change +sub changeChannel +{ + my $ch = shift; + my $freq = $CHANLIST{$settings{FrequencyTable}}->{$ch}; + my $driverf = ($freq * 16)/1000; + + print "Ch.$ch: $freq $driverf\n" if ($settings{Debug}); + + if (!$ivtvObj->setFrequency($tunerFD, $settings{TunerNum}, $driverf)) + { + die "Error: changeChannel($ch) failed!\n"; + } +} + +# tunes to the specified frequency +# takes the frequency to tune to +sub tuneFrequency +{ + my $freq = shift; + my $driverf = ($freq * 16)/1000; + + print "freq: $freq $driverf\n" if ($settings{Debug}); + + if (!$ivtvObj->setFrequency($tunerFD, $settings{TunerNum}, $driverf)) + { + die "Error: tuneFrequency($freq) failed!\n"; + } +} + +my $done = 0; + +sub catch_alarm { + if ($settings{CaptureLastGOP}) + { + $stopGOP = 1; # signal we need to stop the stream and capture the last GOP. + } + else + { + $done = 1; # signal we are done. + } +} + +# does the actual video capturing work. +# takes directoryName, RecordDuration, OutputFileName, tuner +sub captureVideo +{ + my %args = ( @_ ); + my $directoryName = $args{directoryName}; + my $RecordDuration = $args{RecordDuration}; + my $OutputFileName = $args{OutputFileName}; + my $tuner = $args{tuner}; + my $fname = "$directoryName/$OutputFileName"; + + # setup global variables, signal handlers, etc. + + $SIG{ALRM} = \&catch_alarm; + $SIG{INT} = \&catch_alarm; # handle Ctrl-C + + # open the file for writing. + + sysopen(OUTPUT, "$fname", O_CREAT | O_WRONLY | O_LARGEFILE) or die "Error creating file '$fname': $!\n"; + + alarm($RecordDuration); + my $buf = ""; + while (!$done) + { + if ($stopGOP) + { + $stopGOP = 0; + $ivtvObj->stopEncoding($tuner); + $endStream = 1; + $done = 1; # signal we are done after this loop. + } + # read from the device and write to the file. (16384) 32768 + my $bytes = read($tuner, $buf, 16384); + if (!$bytes && $endStream) + { + last; + } + print OUTPUT $buf; + } + + # close the file + close(OUTPUT); +} + +# returns the formatted directory string +sub formatDirectoryString +{ + my $temp = $settings{DirectoryFormatString}; + my $result = $settings{OutputDirectory}; + my %lookupTable = ( + "d" => `/bin/date "$settings{DateTimeFormatString}"`, + "I" => $settings{InputName}, + "c" => $settings{Channel}, + ); + + # fixup the InputName value + $lookupTable{I} =~ s/\s/_/g; + # cleanup the trailing slash on the date + chomp $lookupTable{d}; + + foreach my $option ("d", "I", "c") + { + $temp =~ s/\%$option/$lookupTable{$option}/g; + } + + $result .= "/" . ($temp ? "$temp/" : ""); + + return $result; +} + +sub outputSettingSetup +{ + my $date = `/bin/date`; chomp $date; + + if ($settings{OutputSettingsType} eq "shell") + { + print $settingsFH "# Settings for Recording made on $date.\n"; + } + elsif ($settings{OutputSettingsType} eq "perl") + { + print $settingsFH "# Settings for Recording made on $date.\n"; + print $settingsFH "my %settings = ();\n"; + } +} + +# outputs the specified setting and it's value to the +# settings file represented by $settingsFH in the +# specified language. +sub outputSetting +{ + my $setting = shift; + my $value = $settings{$setting}; + + return if (!$settings{OutputSettings}); + + if ($settings{OutputSettingsType} eq "shell") + { + print $settingsFH "REC_" . uc($setting) . "=\"$value\"\n"; + } + elsif ($settings{OutputSettingsType} eq "perl") + { + print $settingsFH "\$settings{$setting} = \"$value\";\n"; + } +} Index: trunk/install/perl/recwrap.pl =================================================================== --- trunk/install/perl/recwrap.pl (リビジョン 70) +++ trunk/install/perl/recwrap.pl (リビジョン 83) @@ -1,4 +1,4 @@ #!/usr/bin/perl -#usage recwrap.pl ch length(sec) [bitrate(5)] [TID] [NO] [PID] +#usage recwrap.pl ch length(sec) [bitrate(5)] [TID] [NO] [PID] [stationid] [digitalflag] [digitalband] [digitalch] # # Anime recording system foltia @@ -39,20 +39,63 @@ $tid = $ARGV[3] ; $countno = $ARGV[4] ; -$pid = $ARGV[5] ; +$pid = $ARGV[5] ; +$stationid = $ARGV[6] ; +$usedigital = $ARGV[7] ; +$digitalstationband = $ARGV[8] ; +$digitalch= $ARGV[9] ; + +#DB初期化 + my $data_source = sprintf("dbi:%s:dbname=%s;host=%s;port=%d", + $DBDriv,$DBName,$DBHost,$DBPort); + $dbh = DBI->connect($data_source,$DBUser,$DBPass) ||die $DBI::error;; + + +if ($usedigital == 1){ + $extension = ".m2t";#TSの拡張子 +}else{ + $extension = ".m2p";#MPEG2の拡張子 +} $outputfile = `date +%Y%m%d-%H%M --date "1 min "`; chomp($outputfile); + if ($tid == 0){ - $outputfilename = "0--".$outputfile."-".$recch.".m2p"; + $outputfilename = "0--".$outputfile."-".$recch.$extension; $mp4newstylefilename = "-0--".$outputfile."-".$recch; }else{ if ($countno == 0){ - $outputfilename = $tid ."--".$outputfile.".m2p"; + $outputfilename = $tid ."--".$outputfile.$extension; $mp4newstylefilename = "-" . $tid ."--".$outputfile; }else{ - $outputfilename = $tid ."-".$countno."-".$outputfile.".m2p"; + $outputfilename = $tid ."-".$countno."-".$outputfile.$extension; $mp4newstylefilename = "-" . $tid ."-".$countno."-".$outputfile; } } + +if ($usedigital == 1){ +#デジタルなら +&writelog("recwrap RECSTART DIGITAL $digitalstationband $digitalch $reclength $stationid 0 $outputfilename $tid $countno friio"); +#録画 +$starttime = (`date +%s`); +$oserr = system("$toolpath/perl/digitaltvrecording.pl $digitalstationband $digitalch $reclength $stationid 0 $outputfilename $tid $countno friio"); +$oserr = $oserr / 256; + +if ($oserr == 1){ + &writelog("recwrap ABORT recfile exist. [$outputfilename] $digitalstationband $digitalch $reclength $stationid 0 $outputfilename $tid $countno"); + exit; +}elsif ($oserr == 2){ + &writelog("recwrap ERR 2:friio busy;retry."); + &continuousrecordingcheck;#もうすぐ終わる番組をkill + sleep(2); + $oserr = system("$toolpath/perl/digitaltvrecording.pl $digitalstationband $digitalch $reclength $stationid N $outputfilename $tid $countno friio"); + $oserr = $oserr / 256; + if ($oserr == 2){ + &writelog("recwrap ERR 2:friio busy;Giving up digital recording."); + } +}elsif ($oserr == 3){ +&writelog("recwrap ABORT:ERR 3"); +exit ; +} +}else{ #リモコン操作 # $haveirdaunit = 1;リモコンつないでるかどうか確認 @@ -71,6 +114,7 @@ exit; }#end if - -&writelog("recwrap RECSTART $recch $reclength 0 $outputfilename $bitrate $tid $countno $pid"); +# アナログ録画 +&writelog("recwrap RECSTART $recch $reclength 0 $outputfilename $bitrate $tid $countno $pid $usedigital $digitalstationband $digitalch"); + #録画 #system("$toolpath/perl/tvrecording.pl $recch $reclength 0 $outputfile $bitrate $tid $countno"); @@ -83,10 +127,22 @@ exit; } + +}#endif #デジタル優先フラグ + #デバイスビジーで即死してないか検出 $now = (`date +%s`); if ($now < $starttime + 100){ #録画プロセス起動してから100秒以内に戻ってきてたら + $retrycounter == 0; while($now < $starttime + 100){ + if($retrycounter >= 5){ + &writelog("recwrap WARNING Giving up recording."); + last; + } &writelog("recwrap retry recording $now $starttime"); + #アナログ録画 $starttime = (`date +%s`); +if($outputfilename =~ /.m2t$/){ + $outputfilename =~ s/.m2t$/.m2p/; +} $oserr = system("$toolpath/perl/tvrecording.pl $recch $reclength N $outputfilename $bitrate $tid $countno"); $now = (`date +%s`); @@ -96,67 +152,73 @@ exit; }# if + $retrycounter++; }# while } # if - &writelog("recwrap RECEND [$outputfilename] $recch $reclength 0 0 $bitrate $tid $countno $pid"); -#DB初期化 - my $data_source = sprintf("dbi:%s:dbname=%s;host=%s;port=%d", - $DBDriv,$DBName,$DBHost,$DBPort); - $dbh = DBI->connect($data_source,$DBUser,$DBPass) ||die $DBI::error;; # m2pファイル名をPIDレコードに書き込み - $DBQuery = "UPDATE foltia_subtitle SET - m2pfilename = '$outputfilename' - WHERE pid = '$pid' "; + $DBQuery = "UPDATE foltia_subtitle SET m2pfilename = '$outputfilename' WHERE pid = '$pid' "; $sth = $dbh->prepare($DBQuery); $sth->execute(); -&writelog("recwrap UPDATEDB $DBQuery"); +&writelog("recwrap DEBUG UPDATEDB $DBQuery"); +&changefilestatus($pid,$FILESTATUSRECEND); # m2pファイル名をPIDレコードに書き込み - $DBQuery = "insert into foltia_m2pfiles values ('$outputfilename')"; + $DBQuery = "insert into foltia_m2pfiles values ('$outputfilename')"; $sth = $dbh->prepare($DBQuery); $sth->execute(); -&writelog("recwrap UPDATEDB $DBQuery"); +&writelog("recwrap DEBUG UPDATEDB $DBQuery"); # Starlight breaker向けキャプチャ画像作成 if (-e "$toolpath/perl/captureimagemaker.pl"){ &writelog("recwrap Call captureimagemaker $outputfilename"); +&changefilestatus($pid,$FILESTATUSCAPTURE); system ("$toolpath/perl/captureimagemaker.pl $outputfilename"); -} - - - -# PSP ------------------------------------------------------ -#PSPトラコン必要かどうか -$DBQuery = "SELECT psp,aspect,title FROM foltia_program WHERE tid = '$tid' "; +&changefilestatus($pid,$FILESTATUSCAPEND); +} + + + +# MPEG4 ------------------------------------------------------ +#MPEG4トラコン必要かどうか +$DBQuery = "SELECT psp,aspect,title FROM foltia_program WHERE tid = '$tid' "; $sth = $dbh->prepare($DBQuery); $sth->execute(); @psptrcn= $sth->fetchrow_array; - if ($psptrcn[0] == 1 ){#トラコン番組 - - -#PSPムービーディレクトリがアルかどうか +if ($psptrcn[0] == 1 ){#トラコン番組 +&writelog("recwrap Launch ipodtranscode.pl"); +exec ("$toolpath/perl/ipodtranscode.pl"); +exit; +# +# ここから下は旧エンコード#2008/12/23 +# 新エンコードはDBを見て未完了MPEG2を順次トラコン処理、 +# 分散エンコードもきっとラクチンに対応可能 +# 新エンコードではXviD/M4VスタイルとPSPファイル名対応を廃止 + +&changefilestatus($pid,80); +#MPEG4ムービーディレクトリがあるかどうか #TIDが100以上の3桁の場合はそのまま my $pspfilnamehd = ""; - $pspfilnamehd = $tid; +$pspfilnamehd = $tid; +&makemp4dir($tid); $pspdirname = "$tid.localized/"; $pspdirname = $recfolderpath."/".$pspdirname; #なければ作る -unless (-e $pspdirname ){ - system("$toolpath/perl/mklocalizeddir.pl $tid"); - #&writelog("recwrap mkdir $pspdirname"); -} +#unless (-e $pspdirname ){ +# system("$toolpath/perl/mklocalizeddir.pl $tid"); +# #&writelog("recwrap mkdir $pspdirname"); +#} $pspdirname = "$tid.localized/mp4/"; $pspdirname = $recfolderpath."/".$pspdirname; #なければ作る -unless (-e $pspdirname ){ - mkdir $pspdirname ,0777; - #&writelog("recwrap mkdir $pspdirname"); -} +#unless (-e $pspdirname ){ +# mkdir $pspdirname ,0777; +# #&writelog("recwrap mkdir $pspdirname"); +#} #ファイル名決定 @@ -350,7 +412,5 @@ # MP4ファイル名をPIDレコードに書き込み - $DBQuery = "UPDATE foltia_subtitle SET - PSPfilename = '$mp4filename' - WHERE pid = '$pid' "; + $DBQuery = "UPDATE foltia_subtitle SET PSPfilename = '$mp4filename' WHERE pid = '$pid' "; $sth = $dbh->prepare($DBQuery); $sth->execute(); @@ -358,12 +418,95 @@ # MP4ファイル名をfoltia_mp4files挿入 - $DBQuery = "insert into foltia_mp4files values ('$tid','$mp4filename') "; + $DBQuery = "insert into foltia_mp4files values ('$tid','$mp4filename') "; $sth = $dbh->prepare($DBQuery); $sth->execute(); &writelog("recwrap UPDATEmp4DB $DBQuery"); +&changefilestatus($pid,200); }#PSPトラコンあり - - - +sub continuousrecordingcheck(){ +my $now = `date +%s --date "2 min "`; +&writelog("recwrap DEBUG continuousrecordingcheck() now $now"); +my @processes =`ps ax | grep recfriio`; + +my $psline = ""; +my @processline = ""; +my $pid = ""; +my @pid; +my $sth; +foreach (@processes){ + if (/friiodetect/) { + if (/^.[0-9]*\s/){ + push(@pid, $&); + }#if + }#if +}#foreach + +if (@pid > 0){ +my @filenameparts; +my $tid = ""; +my $startdate = ""; +my $starttime = ""; +my $startdatetime = ""; +my @recfile; +my $endtime = ""; +my $endtimeepoch = ""; +foreach $pid (@pid){ +#print "DEBUG PID $pid\n"; +&writelog("recwrap DEBUG continuousrecordingcheck() PID $pid"); + + my @lsofoutput = `/usr/sbin/lsof -p $pid`; + my $filename = ""; + #print "recfolferpath $recfolderpath\n"; + foreach (@lsofoutput){ + if (/m2t/){ + @processline = split(/\s+/,$_); + $filename = $processline[8]; + #print "DEBUG $_ \n"; + #print "DEBUG $processline[0]/$processline[1]/$processline[2]/$processline[3]/$processline[4]/$processline[5]/$processline[6]/$processline[7]/$processline[8] \n"; + $filename =~ s/$recfolderpath\///; + #print "DEBUG FILENAME $filename\n"; + &writelog("recwrap DEBUG continuousrecordingcheck() FILENAME $filename"); + # 1520-9-20081201-0230.m2t + @filenameparts = split(/-/,$filename); + $tid = $filenameparts[0]; + $startdate = $filenameparts[2]; + $starttime = $filenameparts[3]; + $startdatetime = $filenameparts[2].$filenameparts[3]; + #DBから録画中番組のデータ探す + $DBQuery = " +SELECT foltia_subtitle.tid,foltia_subtitle.countno,foltia_subtitle.subtitle,foltia_subtitle.startdatetime ,foltia_subtitle.enddatetime ,foltia_subtitle.lengthmin ,foltia_tvrecord.bitrate , foltia_subtitle.startoffset , foltia_subtitle.pid ,foltia_tvrecord.digital +FROM foltia_subtitle ,foltia_tvrecord +WHERE +foltia_tvrecord.tid = foltia_subtitle.tid AND +foltia_tvrecord.tid = $tid AND +foltia_subtitle.startdatetime = $startdatetime AND +foltia_tvrecord.digital = 1"; + &writelog("recwrap DEBUG continuousrecordingcheck() $DBQuery"); + $sth = $dbh->prepare($DBQuery); + &writelog("recwrap DEBUG continuousrecordingcheck() prepare"); + $sth->execute(); + &writelog("recwrap DEBUG continuousrecordingcheck() execute"); + @recfile = $sth->fetchrow_array; + &writelog("recwrap DEBUG continuousrecordingcheck() @recfile $recfile[0] $recfile[1] $recfile[2] $recfile[3] $recfile[4] $recfile[5] $recfile[6] $recfile[7] $recfile[8] $recfile[9] "); + #終了時刻 + $endtime = $recfile[4]; + $endtimeepoch = &foldate2epoch($endtime); + &writelog("recwrap DEBUG continuousrecordingcheck() $recfile[0] $recfile[1] $recfile[2] $recfile[3] $recfile[4] $recfile[5] endtimeepoch $endtimeepoch"); + if ($endtimeepoch < $now){#まもなく終わる番組なら + #kill + system("kill $pid"); + &writelog("recwrap recording process killed $pid/$endtimeepoch/$now"); + } + }#endif m2t + }#foreach lsofoutput +}#foreach +}else{ +#print "DEBUG fecfriio NO PID\n"; +&writelog("recwrap No recording process killed."); +} +}#endsub + + + Index: trunk/install/php/reservecomp.php =================================================================== --- trunk/install/php/reservecomp.php (リビジョン 70) +++ trunk/install/php/reservecomp.php (リビジョン 83) @@ -54,5 +54,8 @@ $station = 0; } - +$usedigital = getgetnumform(usedigital); + if ($usedigital == "") { + $usedigital = 0; + } $bitrate = getgetnumform(bitrate); if ($bitrate == "") { @@ -202,10 +205,9 @@ if ($maxrows == 0) { //新規追加 - $query = "INSERT INTO foltia_tvrecord values ('$tid','$station','$bitrate')"; + $query = "INSERT INTO foltia_tvrecord values ('$tid','$station','$bitrate','$usedigital')"; $rs = m_query($con, $query, "DB書き込みに失敗しました"); }else{//修正　(ビットレート) $query = "UPDATE foltia_tvrecord SET - bitrate = '$bitrate' WHERE tid = '$tid' AND stationid = '$station' - "; + bitrate = '$bitrate' , digital = '$usedigital' WHERE tid = '$tid' AND stationid = '$station' "; $rs = m_query($con, $query, "DB書き込みに失敗しました"); } Index: trunk/install/php/m.php =================================================================== --- trunk/install/php/m.php (リビジョン 77) +++ trunk/install/php/m.php (リビジョン 83) @@ -35,4 +35,6 @@ $now = date("YmdHi"); +$today = date("Ymd"); +$nowdate = date("Hi",(mktime(date("G"),date("i")+8,date("s"),date("m"),date("d"),date("Y")))); $errflag = 0; $pname = "手動録画"; @@ -74,4 +76,6 @@ $recstid = getgetnumform(recstid); $pname = getgetform(pname); +//$usedigital = getgetnumform(usedigital); + //確認 $startdatetime = "$startdate"."$starttime"; @@ -105,4 +109,10 @@ } } +//デジタル優先 +/*if ($usedigital == 1){ +}else{ + $usedigital = 0; +} +*/ //正しければ if ($errflag == 0){ @@ -193,8 +203,8 @@

放送日: - 年月日 Ex.19800121

+ 年月日 Ex.

録画開始時刻: - 時分 Ex.2304

+ 時分 Ex.

録画尺: @@ -205,7 +215,11 @@ 0 +UNION +SELECT DISTINCT stationid,stationname,stationrecch ,digitalch +FROM foltia_station +WHERE digitalch > 0 ORDER BY \"stationid\" ASC"; @@ -248,5 +262,17 @@ } } - +/* +print "

デジタル録画を優先:"; + +if ($usedigital == 1){ +print " する　 + しない　 +"; +}else{ +print " する　 + しない　 +"; +} +*/ ?>

番組名: Index: trunk/install/php/foltia_config2.php.template =================================================================== --- trunk/install/php/foltia_config2.php.template (リビジョン 70) +++ trunk/install/php/foltia_config2.php.template (リビジョン 83) @@ -17,5 +17,5 @@ $recfolderpath = '/home/foltia/php/tv'; //録画ファイルの保存先のパス。 $httpmediamappath = '/tv'; //ブラウザから見える録画ファイルのある位置。 - $recunits = '4'; //搭載エンコーダの数 + $recunits = '4'; //搭載アナログキャプチャカードチャンネル数 $protectmode = 0; //未使用:(ブラウザからの予約削除を禁止するなどの保護モードで動作します) @@ -24,4 +24,5 @@ $environmentpolicytoken = "";//環境ポリシーのパスワードに連結されるセキュリティコード $perltoolpath = $toolpath ;//perl版の初期設定の位置。デフォルトではphpと同じ位置 + $usedigital = 1;//Friioなどでデジタル録画をするか 1:する 0:しない // データベース接続設定 Index: trunk/install/php/showplaylist.php =================================================================== --- trunk/install/php/showplaylist.php (リビジョン 70) +++ trunk/install/php/showplaylist.php (リビジョン 83) @@ -14,5 +14,5 @@ 　省略時、録画順にソートされる。　titleのときに、番組順ソートされる。 -　rawのときに、DBに記録されている番組録画情報ではなくディレクトリにあるm2pファイルを全て表示する。 +　rawのときに、DBに記録されている番組録画情報ではなくディレクトリにあるm2p/m2tファイルを全て表示する。 DCC-JPL Japan/foltia project @@ -97,5 +97,5 @@ //旧仕様 if($list == "raw"){ -exec ("ls -t $recfolderpath/*.m2p", $m2pfiles); +exec ("ls -t $recfolderpath/*.m2?", $m2pfiles); @@ -106,5 +106,5 @@ if(($fName == ".") or ($fName == "..") ){ continue; } - if (ereg(".m2p", $fName)){ + if (ereg(".m2.+", $fName)){ $filesplit = split("-",$fName); @@ -230,5 +230,5 @@ } if (file_exists("./selectcaptureimage.php") ) { - $capimgpath = preg_replace("/.m2p/", "", $fName); + $capimgpath = preg_replace("/.m2.+/", "", $fName); print " キャプ\n"; } Index: trunk/install/php/reserveprogram.php =================================================================== --- trunk/install/php/reserveprogram.php (リビジョン 70) +++ trunk/install/php/reserveprogram.php (リビジョン 83) @@ -89,5 +89,6 @@ 放送局 - ビットレート + デジタル録画優先 + アナログビットレート @@ -128,4 +129,23 @@ + + + + +

・必要ハードウェア

・インストール

・配線

・OSインストール

・Apacheインストール

・ivtvドライバインストール

・PostgreSQLインストール

・各種ツールインストール

・各種アプリインストール

・各種Perlモジュールのインストール

・ffmpegインストール

・foltia本体

・mp4psp

・各種ツールインストール

・外部チューナコントロール(オプション)

・設定3:foltia_stationテーブル

・Tira2準備(オプション)

・動作確認

予約一覧:

Folcast(RSS):

・おわりに